| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for the Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error, which may prevent ingress buffers from being replenished under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to consume all input buffers, which are shared between all interfaces, leading to a queue wedge condition in all active interfaces. This situation would cause an affected device to stop processing any incoming traffic and result in a DoS condition until the device is reloaded manually. |
| A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots. |
| A vulnerability in the web-based management interface of Cisco Application Policy Infrastructure Controller (APIC) Software could allow an unauthenticated, remote attacker to access sensitive system usage information. The vulnerability is due to a lack of proper data protection mechanisms for certain components in the underlying Application Centric Infrastructure (ACI). An attacker could exploit this vulnerability by attempting to observe certain network traffic when accessing the APIC. A successful exploit could allow the attacker to access and collect certain tracking data and usage statistics on an affected device. |
| A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected. |
| A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later. |
| A vulnerability in the FUSE filesystem functionality for Cisco Application Policy Infrastructure Controller (APIC) software could allow an authenticated, local attacker to escalate privileges to root on an affected device. The vulnerability is due to insufficient input validation for certain command strings issued on the CLI of the affected device. An attacker with write permissions for files within a readable folder on the device could alter certain definitions in the affected file. A successful exploit could allow an attacker to cause the underlying FUSE driver to execute said crafted commands, elevating the attacker's privileges to root on an affected device. |
| A vulnerability in the TFTP service of Cisco Network Convergence System 1000 Series software could allow an unauthenticated, remote attacker to retrieve arbitrary files from the targeted device, possibly resulting in information disclosure. The vulnerability is due to improper validation of user-supplied input within TFTP requests processed by the affected software. An attacker could exploit this vulnerability by using directory traversal techniques in malicious requests sent to the TFTP service on a targeted device. An exploit could allow the attacker to retrieve arbitrary files from the targeted device, resulting in the disclosure of sensitive information. This vulnerability affects Cisco IOS XR Software releases prior to Release 6.5.2 for Cisco Network Convergence System 1000 Series devices when the TFTP service is enabled. |
| A vulnerability in the default configuration of the Cisco Aironet Active Sensor could allow an unauthenticated, remote attacker to restart the sensor. The vulnerability is due to a default local account with a static password. The account has privileges only to reboot the device. An attacker could exploit this vulnerability by guessing the account name and password to access the CLI. A successful exploit could allow the attacker to reboot the device repeatedly, creating a denial of service (DoS) condition. It is not possible to change the configuration or view sensitive data with this account. Versions prior to DNAC1.2.8 are affected. |
| A vulnerability in the update service of Cisco Webex Meetings Desktop App and Cisco Webex Productivity Tools for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools. This vulnerability is fixed in Cisco Webex Meetings Desktop App Release 33.6.6 and 33.9.1 releases. This vulnerability is fixed in Cisco Webex Productivity Tools Release 33.0.7. |
| A vulnerability in the Decryption Policy Default Action functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass a configured drop policy and allow traffic onto the network that should have been denied. The vulnerability is due to the incorrect handling of SSL-encrypted traffic when Decrypt for End-User Notification is disabled in the configuration. An attacker could exploit this vulnerability by sending a SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured drop policy to block specific SSL connections. Releases 10.1.x and 10.5.x are affected. |
| A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software. |
| A vulnerability in the Graphite service of Cisco HyperFlex software could allow an unauthenticated, remote attacker to retrieve data from the Graphite service. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by sending crafted requests to the Graphite service. A successful exploit could allow the attacker to retrieve any statistics from the Graphite service. Versions prior to 3.5(2a) are affected. |
| A vulnerability in the hxterm service of Cisco HyperFlex Software could allow an unauthenticated, local attacker to gain root access to all nodes in the cluster. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the hxterm service as a non-privileged, local user. A successful exploit could allow the attacker to gain root access to all member nodes of the HyperFlex cluster. This vulnerability affects Cisco HyperFlex Software Releases prior to 3.5(2a). |
| A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected. |
| A vulnerability in the Quality of Voice Reporting (QOVR) service of Cisco Prime Collaboration Assurance (PCA) Software could allow an unauthenticated, remote attacker to access the system as a valid user. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the QOVR service with a valid username. A successful exploit could allow the attacker to perform actions with the privileges of the user that is used for access. This vulnerability affects Cisco PCA Software Releases prior to 12.1 SP2. |
| A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited. |
| A vulnerability in the Identity Services Engine (ISE) integration feature of Cisco Prime Infrastructure (PI) could allow an unauthenticated, remote attacker to perform a man-in-the-middle attack against the Secure Sockets Layer (SSL) tunnel established between ISE and PI. The vulnerability is due to improper validation of the server SSL certificate when establishing the SSL tunnel with ISE. An attacker could exploit this vulnerability by using a crafted SSL certificate and could then intercept communications between the ISE and PI. A successful exploit could allow the attacker to view and alter potentially sensitive information that the ISE maintains about clients that are connected to the network. This vulnerability affects Cisco Prime Infrastructure Software Releases 2.2 through 3.4.0 when the PI server is integrated with ISE, which is disabled by default. |
| A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected. |
| A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user. |
