| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix null-pointer dereference on edid reading
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[ +0.000010] #PF: supervisor read access in kernel mode
[ +0.000005] #PF: error_code(0x0000) - not-present page
[ +0.000004] PGD 0 P4D 0
[ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[ +0.000003] PKRU: 55555554
[ +0.000003] Call Trace:
[ +0.000006] <TASK>
[ +0.000006] ? __die+0x23/0x70
[ +0.000011] ? page_fault_oops+0x17d/0x4c0
[ +0.000008] ? preempt_count_add+0x6e/0xa0
[ +0.000008] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000011] ? exc_page_fault+0x7f/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? i2c_transfer+0xd/0x100
[ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[ +0.000067] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm]
[ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000042] edid_block_read+0x3b/0xd0 [drm]
[ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm]
[ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm]
[ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[ +0.000000] status_store+0xb2/0x1f0 [drm]
[ +0.000000] kernfs_fop_write_iter+0x136/0x1d0
[ +0.000000] vfs_write+0x24d/0x440
[ +0.000000] ksys_write+0x6f/0xf0
[ +0.000000] do_syscall_64+0x60/0xc0
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ +0.000000] RIP: 0033:0x7f9ad46b4b00
[ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[ +0.000000] RBP: 0000000000000002 R08
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't drop extent_map for free space inode on write error
While running the CI for an unrelated change I hit the following panic
with generic/648 on btrfs_holes_spacecache.
assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1385!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1
RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0
Call Trace:
<TASK>
extent_write_cache_pages+0x2ac/0x8f0
extent_writepages+0x87/0x110
do_writepages+0xd5/0x1f0
filemap_fdatawrite_wbc+0x63/0x90
__filemap_fdatawrite_range+0x5c/0x80
btrfs_fdatawrite_range+0x1f/0x50
btrfs_write_out_cache+0x507/0x560
btrfs_write_dirty_block_groups+0x32a/0x420
commit_cowonly_roots+0x21b/0x290
btrfs_commit_transaction+0x813/0x1360
btrfs_sync_file+0x51a/0x640
__x64_sys_fdatasync+0x52/0x90
do_syscall_64+0x9c/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
This happens because we fail to write out the free space cache in one
instance, come back around and attempt to write it again. However on
the second pass through we go to call btrfs_get_extent() on the inode to
get the extent mapping. Because this is a new block group, and with the
free space inode we always search the commit root to avoid deadlocking
with the tree, we find nothing and return a EXTENT_MAP_HOLE for the
requested range.
This happens because the first time we try to write the space cache out
we hit an error, and on an error we drop the extent mapping. This is
normal for normal files, but the free space cache inode is special. We
always expect the extent map to be correct. Thus the second time
through we end up with a bogus extent map.
Since we're deprecating this feature, the most straightforward way to
fix this is to simply skip dropping the extent map range for this failed
range.
I shortened the test by using error injection to stress the area to make
it easier to reproduce. With this patch in place we no longer panic
with my error injection test. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix possible deadlock during netlink dump operation
Recently, I've been hitting following deadlock warning during dpll pin
dump:
[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
which lock already depends on the new lock.
[52804.643551]
the existing dependency chain (in reverse order) is:
[52804.644259]
-> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836] lock_acquire+0x174/0x3e0
[52804.645271] __mutex_lock+0x119/0x1150
[52804.645723] dpll_lock_dumpit+0x13/0x20
[52804.646169] genl_start+0x266/0x320
[52804.646578] __netlink_dump_start+0x321/0x450
[52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575] genl_rcv_msg+0x1ed/0x3b0
[52804.648001] netlink_rcv_skb+0xdc/0x210
[52804.648440] genl_rcv+0x24/0x40
[52804.648831] netlink_unicast+0x2f1/0x490
[52804.649290] netlink_sendmsg+0x36d/0x660
[52804.649742] __sock_sendmsg+0x73/0xc0
[52804.650165] __sys_sendto+0x184/0x210
[52804.650597] __x64_sys_sendto+0x72/0x80
[52804.651045] do_syscall_64+0x6f/0x140
[52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
-> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650] check_prev_add+0x1ae/0x1280
[52804.653107] __lock_acquire+0x1ed3/0x29a0
[52804.653559] lock_acquire+0x174/0x3e0
[52804.653984] __mutex_lock+0x119/0x1150
[52804.654423] netlink_dump+0xb3/0x780
[52804.654845] __netlink_dump_start+0x389/0x450
[52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842] genl_rcv_msg+0x1ed/0x3b0
[52804.656272] netlink_rcv_skb+0xdc/0x210
[52804.656721] genl_rcv+0x24/0x40
[52804.657119] netlink_unicast+0x2f1/0x490
[52804.657570] netlink_sendmsg+0x36d/0x660
[52804.658022] __sock_sendmsg+0x73/0xc0
[52804.658450] __sys_sendto+0x184/0x210
[52804.658877] __x64_sys_sendto+0x72/0x80
[52804.659322] do_syscall_64+0x6f/0x140
[52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
other info that might help us debug this:
[52804.661077] Possible unsafe locking scenario:
[52804.661671] CPU0 CPU1
[52804.662129] ---- ----
[52804.662577] lock(dpll_lock);
[52804.662924] lock(nlk_cb_mutex-GENERIC);
[52804.663538] lock(dpll_lock);
[52804.664073] lock(nlk_cb_mutex-GENERIC);
[52804.664490]
The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.
Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers
I managed to hit following use after free warning recently:
[ 2169.711665] ==================================================================
[ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0
[ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0
[ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2
[ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2169.722457] Call Trace:
[ 2169.722756] <IRQ>
[ 2169.723024] dump_stack_lvl+0x58/0xb0
[ 2169.723417] print_report+0xc5/0x630
[ 2169.723807] ? __virt_addr_valid+0x126/0x2b0
[ 2169.724268] kasan_report+0xbe/0xf0
[ 2169.724667] ? __run_timers.part.0+0x179/0x4c0
[ 2169.725116] ? __run_timers.part.0+0x179/0x4c0
[ 2169.725570] __run_timers.part.0+0x179/0x4c0
[ 2169.726003] ? call_timer_fn+0x320/0x320
[ 2169.726404] ? lock_downgrade+0x3a0/0x3a0
[ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20
[ 2169.727257] ? ktime_get+0x92/0x150
[ 2169.727630] ? lapic_next_deadline+0x35/0x60
[ 2169.728069] run_timer_softirq+0x40/0x80
[ 2169.728475] __do_softirq+0x1a1/0x509
[ 2169.728866] irq_exit_rcu+0x95/0xc0
[ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80
[ 2169.729718] </IRQ>
[ 2169.729993] <TASK>
[ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 2169.730755] RIP: 0010:default_idle+0x13/0x20
[ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00
[ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242
[ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62
[ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55
[ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14
[ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0
[ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200
[ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0
[ 2169.736954] ? do_idle+0x285/0x290
[ 2169.737323] default_idle_call+0x63/0x90
[ 2169.737730] do_idle+0x285/0x290
[ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30
[ 2169.738511] ? mark_held_locks+0x1a/0x80
[ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200
[ 2169.739417] cpu_startup_entry+0x30/0x40
[ 2169.739825] start_secondary+0x19a/0x1c0
[ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0
[ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b
[ 2169.741179] </TASK>
[ 2169.741686] Allocated by task 1098:
[ 2169.742058] kasan_save_stack+0x1c/0x40
[ 2169.742456] kasan_save_track+0x10/0x30
[ 2169.742852] __kasan_kmalloc+0x83/0x90
[ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll]
[ 2169.743730] auxiliary_bus_probe+0x62/0xb0
[ 2169.744148] really_probe+0x127/0x590
[ 2169.744534] __driver_probe_device+0xd2/0x200
[ 2169.744973] device_driver_attach+0x6b/0xf0
[ 2169.745402] bind_store+0x90/0xe0
[ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.746210] vfs_write+0x41f/0x790
[ 2169.746579] ksys_write+0xc7/0x160
[ 2169.746947] do_syscall_64+0x6f/0x140
[ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 2169.748049] Freed by task 1220:
[ 2169.748393] kasan_save_stack+0x1c/0x40
[ 2169.748789] kasan_save_track+0x10/0x30
[ 2169.749188] kasan_save_free_info+0x3b/0x50
[ 2169.749621] poison_slab_object+0x106/0x180
[ 2169.750044] __kasan_slab_free+0x14/0x50
[ 2169.750451] kfree+0x118/0x330
[ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll]
[ 2169.751271] auxiliary_bus_remove+0x2e/0x40
[ 2169.751694] device_release_driver_internal+0x24b/0x2e0
[ 2169.752191] unbind_store+0xa6/0xb0
[ 2169.752563] kernfs_fo
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
lan966x: Fix crash when adding interface under a lag
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address
Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS
register") defines a new macro to calculate the DSC PPS register
addresses with PPS number as an input. This macro correctly calculates
the addresses till PPS 11 since the addresses increment by 4. So in that
case the following macro works correctly to give correct register
address:
_MMIO(_DSCA_PPS_0 + (pps) * 4)
However after PPS 11, the register address for PPS 12 increments by 12
because of RC Buffer memory allocation in between. Because of this
discontinuity in the address space, the macro calculates wrong addresses
for PPS 12 - 16 resulting into incorrect DSC PPS parameter value
read/writes causing DSC corruption.
This fixes it by correcting this macro to add the offset of 12 for PPS
>=12.
v3: Add correct paranthesis for pps argument (Jani Nikula)
(cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5) |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau: offload fence uevents work to workqueue
This should break the deadlock between the fctx lock and the irq lock.
This offloads the processing off the work from the irq into a workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt, dm-verity: disable tasklets
Tasklets have an inherent problem with memory corruption. The function
tasklet_action_common calls tasklet_trylock, then it calls the tasklet
callback and then it calls tasklet_unlock. If the tasklet callback frees
the structure that contains the tasklet or if it calls some code that may
free it, tasklet_unlock will write into free memory.
The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but
it is not a sufficient fix and the data corruption can still happen [1].
There is no fix for dm-verity and dm-verity will write into free memory
with every tasklet-processed bio.
There will be atomic workqueues implemented in the kernel 6.9 [2]. They
will have better interface and they will not suffer from the memory
corruption problem.
But we need something that stops the memory corruption now and that can be
backported to the stable kernels. So, I'm proposing this commit that
disables tasklets in both dm-crypt and dm-verity. This commit doesn't
remove the tasklet support, because the tasklet code will be reused when
atomic workqueues will be implemented.
[1] https://lore.kernel.org/all/d390d7ee-f142-44d3-822a-87949e14608b@suse.de/T/
[2] https://lore.kernel.org/lkml/20240130091300.2968534-1-tj@kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
HID: i2c-hid-of: fix NULL-deref on failed power up
A while back the I2C HID implementation was split in an ACPI and OF
part, but the new OF driver never initialises the client pointer which
is dereferenced on power-up failures. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Prevent null pointer dereference in update_port_device_state
Currently, the function update_port_device_state gets the usb_hub from
udev->parent by calling usb_hub_to_struct_hub.
However, in case the actconfig or the maxchild is 0, the usb_hub would
be NULL and upon further accessing to get port_dev would result in null
pointer dereference.
Fix this by introducing an if check after the usb_hub is populated. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: qcom: sc8180x: Mark CO0 BCM keepalive
The CO0 BCM needs to be up at all times, otherwise some hardware (like
the UFS controller) loses its connection to the rest of the SoC,
resulting in a hang of the platform, accompanied by a spectacular
logspam.
Mark it as keepalive to prevent such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad4130: zero-initialize clock init data
The clk_init_data struct does not have all its members
initialized, causing issues when trying to expose the internal
clock on the CLK pin.
Fix this by zero-initializing the clk_init_data struct. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
The function spapr_tce_platform_iommu_attach_dev() is missing to call
iommu_group_put() when the domain is already set. This refcount leak
shows up with BUG_ON() during DLPAR remove operation as:
KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries
<snip>
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries
NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000
REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I (6.8.0-rc3-autotest-g99bd3cb0d12e)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000
CFAR: c000000000a0d170 IRQMASK: 0
...
NIP iommu_reconfig_notifier+0x94/0x200
LR iommu_reconfig_notifier+0x8c/0x200
Call Trace:
iommu_reconfig_notifier+0x8c/0x200 (unreliable)
notifier_call_chain+0xb8/0x19c
blocking_notifier_call_chain+0x64/0x98
of_reconfig_notify+0x44/0xdc
of_detach_node+0x78/0xb0
ofdt_write.part.0+0x86c/0xbb8
proc_reg_write+0xf4/0x150
vfs_write+0xf8/0x488
ksys_write+0x84/0x140
system_call_exception+0x138/0x330
system_call_vectored_common+0x15c/0x2ec
The patch adds the missing iommu_group_put() call. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: really cope with fastopen race
Fastopen and PM-trigger subflow shutdown can race, as reported by
syzkaller.
In my first attempt to close such race, I missed the fact that
the subflow status can change again before the subflow_state_change
callback is invoked.
Address the issue additionally copying with all the states directly
reachable from TCP_FIN_WAIT1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame()
Syzkaller reported [1] hitting a warning after failing to allocate
resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will
not help much in this case, it might be prudent to switch to
netdev_warn_once(). At the very least it will suppress syzkaller
reports such as [1].
Just in case, use netdev_warn_once() in send_prp_supervision_frame()
for similar reasons.
[1]
HSR: Could not send supervision frame
WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
...
Call Trace:
<IRQ>
hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382
call_timer_fn+0x193/0x590 kernel/time/timer.c:1700
expire_timers kernel/time/timer.c:1751 [inline]
__run_timers+0x764/0xb20 kernel/time/timer.c:2022
run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035
__do_softirq+0x21a/0x8de kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644
sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649
...
This issue is also found in older kernels (at least up to 5.10). |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix random data corruption from exception handler
The current exception handler implementation, which assists when accessing
user space memory, may exhibit random data corruption if the compiler decides
to use a different register than the specified register %r29 (defined in
ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another
register, the fault handler will nevertheless store -EFAULT into %r29 and thus
trash whatever this register is used for.
Looking at the assembly I found that this happens sometimes in emulate_ldd().
To solve the issue, the easiest solution would be if it somehow is
possible to tell the fault handler which register is used to hold the error
code. Using %0 or %1 in the inline assembly is not posssible as it will show
up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not
convert to an integer.
This patch takes another, better and more flexible approach:
We extend the __ex_table (which is out of the execution path) by one 32-word.
In this word we tell the compiler to insert the assembler instruction
"or %r0,%r0,%reg", where %reg references the register which the compiler
choosed for the error return code.
In case of an access failure, the fault handler finds the __ex_table entry and
can examine the opcode. The used register is encoded in the lowest 5 bits, and
the fault handler can then store -EFAULT into this register.
Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT
config option any longer. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the
BTLB information to set up the static (block) TLB entries.
For that write access to the static btlb_info struct is needed, but
since it is marked __ro_after_init the kernel segfaults with missing
write permissions.
Fix the crash by dropping the __ro_after_init annotation. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix double-free of blocks due to wrong extents moved_len
In ext4_move_extents(), moved_len is only updated when all moves are
successfully executed, and only discards orig_inode and donor_inode
preallocations when moved_len is not zero. When the loop fails to exit
after successfully moving some extents, moved_len is not updated and
remains at 0, so it does not discard the preallocations.
If the moved extents overlap with the preallocated extents, the
overlapped extents are freed twice in ext4_mb_release_inode_pa() and
ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4:
Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is
incremented twice. Hence when trim is executed, a zero-division bug is
triggered in mb_update_avg_fragment_size() because bb_free is not zero
and bb_fragments is zero.
Therefore, update move_len after each extent move to avoid the issue. |
