| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875. |
| A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881. |
| A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267. |
| A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| NSF Unidata NetCDF-C Attribute Name Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of attribute names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27269. |
| NSF Unidata NetCDF-C Dimension Name Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of dimension names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27168. |
| NSF Unidata NetCDF-C Variable Name Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of variable names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27267. |
| NSF Unidata NetCDF-C NC Variable Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of NC variables. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27266. |
| NSF Unidata NetCDF-C Time Unit Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of time units. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27273. |
| A vulnerability was detected in iCMS up to 8.0.0. Affected is the function Save of the file app/config/ConfigAdmincp.php of the component POST Parameter Handler. The manipulation of the argument config results in code injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in OpenRapid RapidCMS up to 1.3.1. It has been declared as critical. This vulnerability affects unknown code of the file /admin/upload.php. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 4dff387283060961c362d50105ff8da8ea40bcbe. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-235204. |
| SOUND4 IMPACT/FIRST/PULSE/Eco v2.x contains an unauthenticated OS command injection vulnerability that allows remote attackers to execute arbitrary shell commands through the 'password' parameter. Attackers can exploit the login.php and index.php scripts by injecting shell commands via the 'password' POST parameter to execute commands with web server privileges. |
| Titra is open source project time tracking software. Prior to version 0.99.49, Titra allows any authenticated Admin user to modify the timeEntryRule in the database. The value is then passed to a NodeVM value to execute as code. Without sanitization, it leads to a Remote Code Execution. Version 0.99.49 fixes the issue. |
| Multiple cross-site scripting (XSS) vulnerabilities in the Plugin for OAuth 2.0 module's OAuth2ProviderApplicationRedirect class in Liferay Portal 7.4.3.41 through 7.4.3.52, and Liferay DXP 7.4 update 41 through 52 allow remote attackers to inject arbitrary web script or HTML via the (1) code, or (2) error parameter. |
| Cross-site scripting (XSS) vulnerability in the Web Content Display widget's article selector in Liferay Liferay Portal 7.4.3.50, and Liferay DXP 7.4 update 50 allows remote attackers to inject arbitrary web script or HTML via a crafted payload injected into a web content article's `Title` field. |
| The Dynamic Data Mapping module in Liferay Portal 7.4.3.67, and Liferay DXP 7.4 update 67 does not limit Document and Media files which can be downloaded from a Form, which allows remote attackers to download any file from Document and Media via a crafted URL. |
| The Object module in Liferay Portal 7.4.3.4 through 7.4.3.60, and Liferay DXP 7.4 before update 61 does not segment object definition by virtual instance in search which allows remote authenticated users in one virtual instance to view object definition from a second virtual instance by searching for the object definition. |
| The Object module in Liferay Portal 7.4.3.4 through 7.4.3.48, and Liferay DXP 7.4 before update 49 does properly isolate objects in difference virtual instances, which allows remote authenticated users in one virtual instance to view objects in a different virtual instance via OAuth 2 scope administration page. |
| Windows Print Spooler Remote Code Execution Vulnerability |
| A vulnerability was found in UTT 进取 512W up to 1.7.7-171114. This affects an unknown part of the file /goform/formWebAuthGlobalConfig. Performing manipulation of the argument hidcontact results in memory corruption. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
