| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a specifically crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.
This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials.
SNMP with IPv6 ACL configurations is not affected.
For more information, see the section of this advisory. |
| A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system.
The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials.
{{value}} ["%7b%7bvalue%7d%7d"])}]] |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to code injection. The ckpt_path2 variable takes user input (e.g. a path to a model) and passes it to change_info_ function, which opens and reads the file on the given path (except it changes the final on the path to train.log), and passes the contents of the file to eval, which can lead to remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The ckpt_path1 variable takes user input (e.g. a path to a model) and passes it to the show_info function in process_ckpt.py, which uses it to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The ckpt_path2 variable takes user input (e.g. a path to a model) and passes it to the extract_small_model function in process_ckpt.py, which uses it to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The ckpt_path0 variable takes user input (e.g. a path to a model) and passes it to the change_info function in process_ckpt.py, which uses it to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The ckpt_a and cpkt_b variables take user input (e.g. a path to a model) and pass it to the merge function in process_ckpt.py, which uses them to load the models on those paths with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The ckpt_dir variable takes user input (e.g. a path to a model) and passes it to the change_info function in export.py, which uses it to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The model_choose variable takes user input (e.g. a path to a model) and passes it to the uvr function in vr.py. In uvr , a new instance of AudioPre class is created with the model_path attribute containing the aformentioned user input. In the AudioPre class, the user input, is used to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to unsafe deserialization. The model_choose variable takes user input (e.g. a path to a model) and passes it to the uvr function in vr.py. In uvr , if model_name contains the string "DeEcho", a new instance of AudioPreDeEcho class is created with the model_path attribute containing the aforementioned user input. In the AudioPreDeEcho class, the user input is used to load the model on that path with torch.load, which can lead to unsafe deserialization and remote code execution. As of time of publication, no known patches exist. |
| Applio is a voice conversion tool. Versions 3.2.8-bugfix and prior are vulnerable to unsafe deserialization in model_information.py. `model_name` in model_information.py takes user-supplied input (e.g. a path to a model) and pass that value to the `run_model_information_script` and later to `model_information` function, which loads that model with `torch.load` in rvc/train/process/model_information.py (on line 16 in 3.2.8-bugfix), which is vulnerable to unsafe deserialization. The issue can lead to remote code execution. A patch is available in the `main` branch of the repository. |
| Applio is a voice conversion tool. Versions 3.2.8-bugfix and prior are vulnerable to unsafe deserialization in inference.py. `model_file` in inference.py as well as `model_file` in tts.py take user-supplied input (e.g. a path to a model) and pass that value to the `change_choices` and later to `get_speakers_id` function, which loads that model with `torch.load` in inference.py (line 326 in 3.2.8-bugfix), which is vulnerable to unsafe deserialization. The issue can lead to remote code execution. A patch is available on the `main` branch of the repository. |
| Applio is a voice conversion tool. Versions 3.2.8-bugfix and prior are vulnerable to arbitrary file write in inference.py. This issue may lead to writing arbitrary files on the Applio server. It can also be used in conjunction with an unsafe deserialization to achieve remote code execution. As of time of publication, no known patches are available. |
| Applio is a voice conversion tool. Versions 3.2.8-bugfix and prior are vulnerable to arbitrary file write in train.py. This issue may lead to writing arbitrary files on the Applio server. It can also be used in conjunction with an unsafe deserialization to achieve remote code execution. As of time of publication, no known patches are available. |
| A vulnerability in confederation implementation for the Border Gateway Protocol (BGP) in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.
This vulnerability is due to a memory corruption that occurs when a BGP update is created with an AS_CONFED_SEQUENCE attribute that has 255 autonomous system numbers (AS numbers). An attacker could exploit this vulnerability by sending a crafted BGP update message, or the network could be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more. A successful exploit could allow the attacker to cause memory corruption, which may cause the BGP process to restart, resulting in a DoS condition. To exploit this vulnerability, an attacker must control a BGP confederation speaker within the same autonomous system as the victim, or the network must be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more. |
| A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. |
| Frappe is a full-stack web application framework. Prior to versions 14.91.0 and 15.52.0, a system user was able to create certain documents in a specific way that could lead to remote code execution. Versions 14.9.1 and 15.52.0 contain a patch for the vulnerability. There's no workaround; an upgrade is required. |
| A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to modify the behavior of default system policies, such as quality of service (QoS) policies, on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete child policies created under default system policies, which are implicitly used by all tenants in the fabric, resulting in disruption of network traffic. Exploitation is not possible for policies under tenants that an attacker has no authorization to access. |
| A vulnerability in the software upgrade component of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Network Controller, formerly Cisco Cloud APIC, could allow an authenticated, remote attacker with Administrator-level privileges to install a modified software image, leading to arbitrary code injection on an affected system.
This vulnerability is due to insufficient signature validation of software images. An attacker could exploit this vulnerability by installing a modified software image. A successful exploit could allow the attacker to execute arbitrary code on the affected system and elevate their privileges to root.
Note: Administrators should always validate the hash of any upgrade image before uploading it to Cisco APIC and Cisco Cloud Network Controller. |
