| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.26.0, FreeRDP's planar bitmap decoder has an out-of-bounds heap write when decoding RLE planar data. In libfreerdp/codec/planar.c, freerdp_bitmap_decompress_planar() validates the X destination coordinate nXDst against the caller-provided destination stride (nDstStep) even when it is writing into the internal temp buffer pTempData. An attacker can bypass the check with a large nDstStep and a large nXDst, causing planar_decompress_plane_rle() to write past the end of pTempData. This vulnerability is fixed in 3.26.0. |
| Use after free in WebCodecs in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in GPU in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read and write in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in Input in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0. |
| A vulnerability was found in Tenda W12 3.0.0.7(4763). This issue affects the function cgiSysWebTimeoutSet of the file /bin/httpd of the component Web Management Interface. The manipulation of the argument web_over_time results in denial of service. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| Improper Input Validation, Improper Control of Generation of Code ('Code Injection') vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Non-parenthesized discovery wrappers such as `masterslave:vm://...,...`
and `static:vm://...` incorrectly pass validation allowing bypass of fix in CVE-2026-34197.
Original description from CVE-2026-34197.
Apache ActiveMQ exposes the Jolokia JMX-HTTP bridge at /api/jolokia/ on the web console. The default Jolokia access policy permits exec operations on all ActiveMQ MBeans (org.apache.activemq:*), including BrokerService.addNetworkConnector(String) and BrokerService.addConnector(String). An authenticated attacker can invoke these operations with a crafted discovery UR that triggers the VM transport's brokerConfig parameter to load a remote Spring XML application context using ResourceXmlApplicationContext. Because Spring's ResourceXmlApplicationContext instantiates all singleton beans before the BrokerService validates the configuration, arbitrary code execution occurs on the broker's JVM through bean factory methods such as Runtime.exec().
This issue affects Apache ActiveMQ Broker: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ All: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ: before 5.19.7, from 6.0.0 before 6.2.6.
Users are recommended to upgrade to version 5.19.7 or 6.2.6, which fixes the issue. |
| AI Tensor Engine for ROCm (AITER) through 0.1.14 contains an unauthenticated remote code execution vulnerability in the MessageQueue.recv() function within shm_broadcast.py that allows unauthenticated remote attackers to execute arbitrary code by sending a malicious pickle payload to a ZMQ SUB socket with no authentication, HMAC, or format validation. Attackers who can reach the writer XPUB endpoint on the cluster network or supply a forged Handle with an attacker-controlled remote_subscribe_addr can deliver a crafted pickle payload that executes arbitrary code simultaneously as the inference worker process on every remote reader worker. |
| Velocity.js is a JavaScript implementation of the Apache Velocity template engine. In 2.1.5 and earlier, a prototype pollution vulnerability was discovered in velocityjs. This issue occurs during the processing of #set directives in Velocity templates. If an application renders a template controlled by an attacker, it is possible to modify Object.prototype, potentially leading to Denial of Service (DoS) or Remote Code Execution (RCE) depending on the server environment. |
| FlexRIC v2.0.0 crashes when the near-RT RIC receives a RIC_INDICATION message with a ran_func_id that does not exist in its registry. The lookup returns NULL, triggering assert() in Debug builds (SIGABRT) or NULL pointer dereference in Release builds (SIGSEGV). A remote unauthenticated attacker can crash the near-RT RIC (port 36421) by sending a crafted RIC_INDICATION with an arbitrary ran_func_id value. |
| A vulnerability has been found in hekmon8 Jenkins-server-mcp 0.1.0. This vulnerability affects the function jobPath of the file src/index.ts of the component get_build_status/get_build_log/trigger_build. Such manipulation leads to server-side request forgery. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in CodeAstro Online Job Portal 1.0. The impacted element is an unknown function of the file /admin/jobs-admins/delete-jobs.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A flaw has been found in OpenSC up to 0.26.1. This affects the function test_kpgen_certwrite of the file src/tools/pkcs11-tool.c of the component pkcs11-tool Key Generation Module. This manipulation causes buffer overflow. The attack is possible to be carried out remotely. The complexity of an attack is rather high. It is indicated that the exploitability is difficult. The exploit has been published and may be used. Patch name: 814f745b3b6d100295f65f1935edd33d520d33ab. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: xbox_remote: heed DMA restrictions
The buffer for IO must not be part of the device structure
because that violates the DMA coherency rules. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient. |
| A vulnerability was found in php-censor up to 2.1.6. This affects an unknown function of the file src/Model/Build/GitBuild.php of the component Webhook Endpoint. Performing a manipulation of the argument commitId results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used. The patch is named cd68d102601320bd319d590b75f7652e66f0685f. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
