| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: mediatek: mtk-svs: Enable the IRQ later
If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.
[ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[ 0.227913] Call trace:
[ 0.227918] svs_isr+0x8c/0x538 |
| AMSS++ 4.7 contains an authentication bypass vulnerability that allows attackers to access administrative accounts using hardcoded credentials. Attackers can log in with the default admin username and password '1234' to gain unauthorized administrative access to the system. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000086000004
| EC = 0x21: IABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
| CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
| Hardware name: FVP Base RevC (DT)
| pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
| pc : 0x0
| lr : ffa_device_remove+0x20/0x2c
| Call trace:
| 0x0
| device_release_driver_internal+0x16c/0x260
| driver_detach+0x90/0xd0
| bus_remove_driver+0xdc/0x11c
| driver_unregister+0x30/0x54
| ffa_driver_unregister+0x14/0x20
| cleanup_module+0x18/0xeec
| __arm64_sys_delete_module+0x234/0x378
| invoke_syscall+0x40/0x108
| el0_svc_common+0xb4/0xf0
| do_el0_svc+0x30/0xa4
| el0_svc+0x2c/0x7c
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| UltraVNC Viewer 1.2.4.0 contains a denial of service vulnerability that allows attackers to crash the application by manipulating VNC Server input. Attackers can generate a malformed 256-byte payload and paste it into the VNC Server connection dialog to trigger an application crash. |
| Dnsmasq-utils 2.79-1 contains a buffer overflow vulnerability in the dhcp_release utility that allows attackers to cause a denial of service by supplying excessive input. Attackers can trigger a core dump and terminate the dhcp_release process by sending a crafted input string longer than 16 characters. |
| The Honeywell Experion PKS
and OneWireless WDM
contains a Deployment of Wrong Handler
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation,
which could result in incorrect handling of packets leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| B64dec 1.1.2 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) with crafted input. Attackers can leverage an egg hunter technique and carefully constructed payload to inject and execute malicious code during base64 decoding process. |
| SpotFTP-FTP Password Recover 2.4.8 contains a denial of service vulnerability that allows attackers to crash the application by generating a large buffer overflow. Attackers can create a text file with 1000 'Z' characters and input it as a registration code to trigger the application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
kheaders: Use array declaration instead of char
Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination
and source buffers. Defining kernel_headers_data as "char" would trip
this check. Since these addresses are treated as byte arrays, define
them as arrays (as done everywhere else).
This was seen with:
$ cat /sys/kernel/kheaders.tar.xz >> /dev/null
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1027!
...
RIP: 0010:fortify_panic+0xf/0x20
[...]
Call Trace:
<TASK>
ikheaders_read+0x45/0x50 [kheaders]
kernfs_fop_read_iter+0x1a4/0x2f0
... |
| A vulnerability, which was classified as critical, was found in Wangshen SecGate 3600 up to 20240516. This affects an unknown part of the file /?g=log_import_save. The manipulation of the argument reqfile leads to unrestricted upload. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-264747. |
| A Server-Side Request Forgery (SSRF) in smarts-srl.com Smart Agent v.1.1.0 allows a remote attacker to obtain sensitive information via a crafted script to the /FB/getFbVideoSource.php component. |
| An issue in Intelight X-1L Traffic controller Maxtime v.1.9.6 allows a remote attacker to execute arbitrary code via the /cgi-bin/generateForm.cgi?formID=142 component. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix memory leak of PBLE objects
On rmmod of irdma, the PBLE object memory is not being freed. PBLE object
memory are not statically pre-allocated at function initialization time
unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD)
for it can be dynamically allocated during scale up and SD's remain
allocated till function deinitialization.
Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table
and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects(). |
| The Timeline Event History plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.1 via deserialization of untrusted input 'timelines-data' parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. |
| 10-Strike Bandwidth Monitor 3.9 contains an unquoted service path vulnerability in multiple services that allows local attackers to escalate privileges. Attackers can place a malicious executable in specific file path locations to achieve privilege escalation to SYSTEM during service startup. |
| ** UNSUPPORTED WHEN ASSIGNED ** ** DISPUTED ** A vulnerability has been found in cyberaz0r WebRAT up to 20191222 and classified as critical. This vulnerability affects the function download_file of the file Server/api.php. The manipulation of the argument name leads to unrestricted upload. The attack can be initiated remotely. The real existence of this vulnerability is still doubted at the moment. The patch is identified as 0c394a795b9c10c07085361e6fcea286ee793701. It is recommended to apply a patch to fix this issue. VDB-257782 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: The issue, discovered in a 20-stars GitHub project (now private) by its author, had CVE requested by a third party 4 years post-resolution, referencing the fix commit (now a broken link). Due to minimal attention and usage, it should not be eligible for CVE according to the project maintainer. |
| The XAO::Web module before 1.84 for Perl mishandles < and > characters in JSON output during use of json-embed in Web::Action. |
| The Mojolicious module before 8.65 for Perl is vulnerable to secure_compare timing attacks that allow an attacker to guess the length of a secret string. Only versions after 1.74 are affected. |
| The Indeed Membership Pro plugin for WordPress is vulnerable to authorization bypass due to missing capability checks on various AJAX actions in versions 7.3 - 8.6. This makes it possible for authenticated attacker, with minimal permission, such as a subscriber, to perform a variety of actions such as modifying settings and viewing sensitive data. |
