| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
loop: loop_set_status_from_info() check before assignment
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22 |
| The Linux deprivileged user vpuser in Radiflow iSAP Smart Collector (CentOS 7 - VSAP 1.20) can read the entire file system content, including files belonging to other users and having restricted access (like, for example, the root password hash). |
| This vulnerability exists in Tapo C500 Wi-Fi camera due to hard-coded RSA private key embedded within the device firmware. An attacker with physical access could exploit this vulnerability to obtain cryptographic private keys which can then be used to perform impersonation, data decryption and man in the middle attacks on the targeted device. |
| Aimeos is an Open Source e-commerce framework for online shops. Starting in version 2024.01.1 and prior to version 2024.04.5, a user with administrative privileges can upload files that look like images but contain PHP code which can then be executed in the context of the web server. Version 2024.04.5 fixes the issue. |
| The WP Private Content Plus through 3.6.2 provides a global content protection feature that requires a password. However, the access control check is based only on the presence of an unprotected client-side cookie. As a result, an unauthenticated attacker can completely bypass the password protection by manually setting the cookie value in their browser. |
| AXIS Optimizer was vulnerable to an unquoted search path vulnerability, which could potentially lead to privilege escalation within Microsoft Windows operating system. This vulnerability can only be exploited if the attacker has access to the local Windows machine and sufficient access rights (administrator) to write data into the installation path of AXIS Optimizer. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page. |
| The Mocca Calendar application before 2.15 for XWiki allows XSS via a title to the view event page. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
It is stated that ath9k_htc_rx_msg() either frees the provided skb or
passes its management to another callback function. However, the skb is
not freed in case there is no another callback function, and Syzkaller was
able to cause a memory leak. Also minor comment fix.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sprd: Release dma buffer to avoid memory leak
When attaching to a domain, the driver would alloc a DMA buffer which
is used to store address mapping table, and it need to be released
when the IOMMU domain is freed. |
| A critical severity vulnerability has been identified in the ALPR Manager role of Security Center that could allow attackers to gain administrative access to the Genetec Security Center system. The Genetec engineering team discovered this issue internally. There is currently no evidence that this vulnerability has been exploited in the wild. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix information leak in f2fs_move_inline_dirents()
When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block. Fix this by zero-initializing the block.
This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.
This was found by running xfstest generic/435 on a KMSAN-enabled kernel. |
| A Session Fixation vulnerability existed in Payload's SQLite adapter due to identifier reuse during account creation. A malicious attacker could create a new account, save its JSON Web Token (JWT), and then delete the account, which did not invalidate the JWT. As a result, the next newly created user would receive the same identifier, allowing the attacker to reuse the JWT to authenticate and perform actions as that user.
This issue has been fixed in version 3.44.0 of Payload. |
| In the Linux kernel, the following vulnerability has been resolved:
perf tool x86: Fix perf_env memory leak
Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 21 byte(s) in 1 object(s) allocated from:
#0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
#2 0x556701d70589 in perf_env__cpuid util/env.c:465
#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
#5 0x556701d8f78b in evsel__config util/evsel.c:1366
#6 0x556701ef5872 in evlist__config util/record.c:108
#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
#8 0x556701cacd07 in run_test tests/builtin-test.c:236
#9 0x556701cacfac in test_and_print tests/builtin-test.c:265
#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
#14 0x556701d3be90 in run_argv tools/perf/perf.c:421
#15 0x556701d3c3f8 in main tools/perf/perf.c:537
#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
``` |
| SAPCAR allows an attacker logged in with high privileges to override the permissions of the current and parent directories of the user or process extracting the archive, leading to privilege escalation. On successful exploitation, an attacker could modify the critical files by tampering with signed archives without breaking the signature, but it has a low impact on the confidentiality and availability of the system. |
| SAP MDM Server ReadString function allows an attacker to send specially crafted packets which could trigger a memory read access violation in the server process that would then fail and exit unexpectedly causing high impact on availability with no impact on confidentiality and integrity of the application. |
| SAPCAR allows an attacker logged in with high privileges to create a malicious SAR archive in SAPCAR. This could enable the attacker to exploit critical files and directory permissions without breaking signature validation, resulting in potential privilege escalation. This has high impact on integrity, but low impact on confidentiality and availability of the system. |
| The Linear eMerge e3-Series through version 1.00-07 is vulnerable to an OS command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary OS commands via the login_id parameter when invoking the forgot_password functionality over HTTP. |
| A race condition in the Nix, Lix, and Guix package managers allows the removal of content from arbitrary folders. This affects Nix before 2.24.15, 2.26.4, 2.28.4, and 2.29.1; Lix before 2.91.2, 2.92.2, and 2.93.1; and Guix before 1.4.0-38.0e79d5b. |
