| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |
| In Advanced Custom Fields (ACF) before 6.3.9 and Secure Custom Fields before 6.3.6.3 (plugins for WordPress), using the Field Group editor to edit one of the plugin's fields can result in execution of a stored XSS payload. NOTE: if you wish to use the WP Engine alternative update mechanism for the free version of ACF, then you can follow the process shown at the advancedcustomfields.com blog URL within the References section below. |
| A vulnerability was found in TRENDnet TEW-411BRP+ 2.07. It has been classified as problematic. Affected is the function sub_401DB0 of the file /usr/sbin/httpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A path traversal vulnerability exists in the Karel IP1211 IP Phone's web management panel. The /cgi-bin/cgiServer.exx endpoint fails to properly sanitize user input to the page parameter, allowing remote authenticated attackers to access arbitrary files on the underlying system by using crafted path traversal sequences. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-02 UTC. |
| A path traversal vulnerability exists in multiple models of Selea Targa IP OCR-ANPR cameras, including iZero, Targa 512, Targa 504, Targa Semplice, Targa 704 TKM, Targa 805, Targa 710 INOX, Targa 750, and Targa 704 ILB. The /common/get_file.php script in the “Download Archive in Storage” page fails to properly validate user-supplied input to the file parameter. Unauthenticated remote attackers can exploit this vulnerability to read arbitrary files on the device, including sensitive system files containing cleartext credentials, potentially leading to authentication bypass and exposure of system information. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-02 UTC. |
| A server-side request forgery (SSRF) vulnerability exists in multiple Selea Targa IP OCR-ANPR camera models, including iZero, Targa 512, Targa 504, Targa Semplice, Targa 704 TKM, Targa 805, Targa 710 INOX, Targa 750, and Targa 704 ILB. The application fails to validate user-supplied input in JSON POST parameters such as ipnotify_address and url, which are used by internal mechanisms to perform image fetch and DNS lookups. This allows remote unauthenticated attackers to induce the system to make arbitrary HTTP requests to internal or external systems, potentially bypassing firewall policies or conducting internal service enumeration. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-25 UTC. |
| A vulnerability has been found in yzk2356911358 StudentServlet-JSP cc0cdce25fbe43b6c58b60a77a2c85f52d2102f5/d4d7a0643f1dae908a4831206f2714b21820f991 and classified as problematic. This vulnerability affects unknown code. The manipulation leads to cross-site request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).
sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.
The same issue exists for iso_connect_cis() calling hci_connect_cis().
Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.
To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.
The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit e542e66b7c2e
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)
To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.
Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.
This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU. |
| An issue was discovered in VectorComponentUserLinks.php in the Vector Skin component in MediaWiki before 1.39.5 and 1.40.x before 1.40.1. vector-intro-page MalformedTitleException is uncaught if it is not a valid title, leading to incorrect web pages. |
| An issue was discovered in the Vector Skin component for MediaWiki before 1.39.5 and 1.40.x before 1.40.1. vector-toc-toggle-button-label is not escaped, but should be, because the line param can have markup. |
| The "Stammdaten" menu of baltic-it TOPqw Webportal v1.35.283.2 (fixed in version 1.35.291), in /Apps/TOPqw/qwStammdaten.aspx, is vulnerable to persistent Cross-Site Scripting (XSS). |
| Insecure Direct Object References (IDOR) in access control in Customer Portal before 2.1.4 on NightWolf Penetration Testing allows an attacker to access via manipulating request parameters or object references. |
| SOOP-CLM from PiExtract has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read, modify, and delete database contents. |
| VyOS 1.3 through 1.5 (fixed in 1.4.2) or any Debian-based system using dropbear in combination with live-build has the same Dropbear private host keys across different installations. Thus, an attacker can conduct active man-in-the-middle attacks against SSH connections if Dropbear is enabled as the SSH daemon. I n VyOS, this is not the default configuration for the system SSH daemon, but is for the console service. To mitigate this, one can run "rm -f /etc/dropbear/*key*" and/or "rm -f /etc/dropbear-initramfs/*key*" and then dropbearkey -t rsa -s 4096 -f /etc/dropbear_rsa_host_key and reload the service or reboot the system before using Dropbear as the SSH daemon (this clears out all keys mistakenly built into the release image) or update to the latest version of VyOS 1.4 or 1.5. Note that this vulnerability is not unique to VyOS and may appear in any Debian-based Linux distribution that uses Dropbear in combination with live-build, which has a safeguard against this behavior in OpenSSH but no equivalent one for Dropbear. |
| The web service of iSherlock from HGiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. |
| UERANSIM before 3.2.6 allows out-of-bounds read when a RLS packet is sent to gNodeB with malformed PDU length. This occurs in function readOctetString in src/utils/octet_view.cpp and in function DecodeRlsMessage in src/lib/rls/rls_pdu.cpp |
| Anthropic Sandbox Runtime is a lightweight sandboxing tool for enforcing filesystem and network restrictions on arbitrary processes at the OS level, without requiring a container. Prior to 0.0.16, due to a bug in sandboxing logic, sandbox-runtime did not properly enforce a network sandbox if the sandbox policy did not configure any allowed domains. This could allow sandboxed code to make network requests outside of the sandbox. A patch for this was released in v0.0.16. |
| A vulnerability, which was classified as critical, has been found in Digital China DCME-520 up to 20250320. This issue affects some unknown processing of the file /usr/local/WWW/function/audit/newstatistics/mon_merge_stat_hist.php. The manipulation of the argument type_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. |
| DCIM dcTrack allows an attacker to misuse certain remote access features. An authenticated user with access to the appliance's virtual console could exploit these features to redirect network traffic, potentially accessing restricted services or data on the host machine. |
