| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Write what were condition within AMD CPUs may allow an admin-privileged attacker to modify the configuration of the CPU pipeline potentially resulting in the corruption of the stack pointer inside an SEV-SNP guest. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()
As the call trace shows, skb_panic was caused by wrong skb->mac_header
in nsh_gso_segment():
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1
RIP: 0010:skb_panic+0xda/0xe0
call Trace:
skb_push+0x91/0xa0
nsh_gso_segment+0x4f3/0x570
skb_mac_gso_segment+0x19e/0x270
__skb_gso_segment+0x1e8/0x3c0
validate_xmit_skb+0x452/0x890
validate_xmit_skb_list+0x99/0xd0
sch_direct_xmit+0x294/0x7c0
__dev_queue_xmit+0x16f0/0x1d70
packet_xmit+0x185/0x210
packet_snd+0xc15/0x1170
packet_sendmsg+0x7b/0xa0
sock_sendmsg+0x14f/0x160
The root cause is:
nsh_gso_segment() use skb->network_header - nhoff to reset mac_header
in skb_gso_error_unwind() if inner-layer protocol gso fails.
However, skb->network_header may be reset by inner-layer protocol
gso function e.g. mpls_gso_segment. skb->mac_header reset by the
inaccurate network_header will be larger than skb headroom.
nsh_gso_segment
nhoff = skb->network_header - skb->mac_header;
__skb_pull(skb,nsh_len)
skb_mac_gso_segment
mpls_gso_segment
skb_reset_network_header(skb);//skb->network_header+=nsh_len
return -EINVAL;
skb_gso_error_unwind
skb_push(skb, nsh_len);
skb->mac_header = skb->network_header - nhoff;
// skb->mac_header > skb->headroom, cause skb_push panic
Use correct mac_offset to restore mac_header and get rid of nhoff. |
| The Squelch Tabs and Accordions Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘tab’ shortcode in all versions up to, and including, 0.4.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Improper access control in secure encrypted virtualization (SEV) could allow a privileged attacker to write to the reverse map page (RMP) during secure nested paging (SNP) initialization, potentially resulting in a loss of guest memory confidentiality and integrity. |
| A vulnerability has been found in kefaming mayi up to 1.3.9 and classified as critical. This vulnerability affects the function Upload of the file app/tools/controller/File.php. The manipulation of the argument File leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: Fix memory leak in error path of kcm_sendmsg()
syzbot reported a memory leak like below:
BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
hex dump (first 32 bytes):
00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
[<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
[<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
[<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
[<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
[<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
[<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
[<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
[<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.
This patch fixes this issue by properly updating the last allocated skb in
'last_skb'. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rcar_fdp1: Fix refcount leak in probe and remove function
rcar_fcp_get() take reference, which should be balanced with
rcar_fcp_put(). Add missing rcar_fcp_put() in fdp1_remove and
the error paths of fdp1_probe() to fix this.
[hverkuil: resolve merge conflict, remove() is now void] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: check CAN address family in isotp_bind()
Add missing check to block non-AF_CAN binds.
Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:
bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content. |
| In the Linux kernel, the following vulnerability has been resolved:
driver: soc: xilinx: use _safe loop iterator to avoid a use after free
The hash_for_each_possible() loop dereferences "eve_data" to get the
next item on the list. However the loop frees eve_data so it leads to
a use after free. Use hash_for_each_possible_safe() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: Protect reconfiguration of sb read-write from racing writes
The reconfigure / remount code takes a lot of effort to protect
filesystem's reconfiguration code from racing writes on remounting
read-only. However during remounting read-only filesystem to read-write
mode userspace writes can start immediately once we clear SB_RDONLY
flag. This is inconvenient for example for ext4 because we need to do
some writes to the filesystem (such as preparation of quota files)
before we can take userspace writes so we are clearing SB_RDONLY flag
before we are fully ready to accept userpace writes and syzbot has found
a way to exploit this [1]. Also as far as I'm reading the code
the filesystem remount code was protected from racing writes in the
legacy mount path by the mount's MNT_READONLY flag so this is relatively
new problem. It is actually fairly easy to protect remount read-write
from racing writes using sb->s_readonly_remount flag so let's just do
that instead of having to workaround these races in the filesystem code.
[1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Fix memory leak in drm_client_target_cloned
dmt_mode is allocated and never freed in this function.
It was found with the ast driver, but most drivers using generic fbdev
setup are probably affected.
This fixes the following kmemleak report:
backtrace:
[<00000000b391296d>] drm_mode_duplicate+0x45/0x220 [drm]
[<00000000e45bb5b3>] drm_client_target_cloned.constprop.0+0x27b/0x480 [drm]
[<00000000ed2d3a37>] drm_client_modeset_probe+0x6bd/0xf50 [drm]
[<0000000010e5cc9d>] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper]
[<00000000909f82ca>] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper]
[<00000000063a69aa>] drm_client_register+0x169/0x240 [drm]
[<00000000a8c61525>] ast_pci_probe+0x142/0x190 [ast]
[<00000000987f19bb>] local_pci_probe+0xdc/0x180
[<000000004fca231b>] work_for_cpu_fn+0x4e/0xa0
[<0000000000b85301>] process_one_work+0x8b7/0x1540
[<000000003375b17c>] worker_thread+0x70a/0xed0
[<00000000b0d43cd9>] kthread+0x29f/0x340
[<000000008d770833>] ret_from_fork+0x1f/0x30
unreferenced object 0xff11000333089a00 (size 128): |
| Access of Resource Using Incompatible Type ('Type Confusion') vulnerability in Hancom Inc. Hancom Office 2018, Hancom Inc. Hancom Office 2020, Hancom Inc. Hancom Office 2022, Hancom Inc. Hancom Office 2024 allows File Content Injection.This issue affects Hancom Office 2018: before 10.0.0.12681; Hancom Office 2020: before 11.0.0.8916; Hancom Office 2022: before 12.0.0.4426; Hancom Office 2024: before 13.0.0.3050. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_pmem: add the missing REQ_OP_WRITE for flush bio
When doing mkfs.xfs on a pmem device, the following warning was
------------[ cut here ]------------
WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct
Modules linked in:
CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:submit_bio_noacct+0x340/0x520
......
Call Trace:
<TASK>
? submit_bio_noacct+0xd5/0x520
submit_bio+0x37/0x60
async_pmem_flush+0x79/0xa0
nvdimm_flush+0x17/0x40
pmem_submit_bio+0x370/0x390
__submit_bio+0xbc/0x190
submit_bio_noacct_nocheck+0x14d/0x370
submit_bio_noacct+0x1ef/0x520
submit_bio+0x55/0x60
submit_bio_wait+0x5a/0xc0
blkdev_issue_flush+0x44/0x60
The root cause is that submit_bio_noacct() needs bio_op() is either
WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign
REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail
the flush bio.
Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we
could fix the flush order issue and do flush optimization later. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix possible null-ptr-deref in ubi_free_volume()
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path. |
| Protection mechanism failure for some Edge Orchestrator software before version 24.11.1 for Intel(R) Tiber(TM) Edge Platform may allow an authenticated user to potentially enable denial of service via adjacent access. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code. |
| Extraction of Account Connectivity Credentials (ACCs) from the IT Management Agent secure storage |
| This vulnerability allowed a site to enter fullscreen, after a user click, without a full-screen notification (toast) appearing. Without this notification, users could potentially be misled about what site they were on if a malicious site renders a fake UI (like a fake address bar.) |
| This vulnerability allows a high-privileged authenticated PAM user to achieve remote command execution on the affected PAM system by uploading a specially crafted upgrade file. |
