| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing Authorization vulnerability in Paolo GeoDirectory allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects GeoDirectory: from n/a through 2.8.157. |
| FlexRIC v2.0.0 crashes when receiving a RIC_SUBSCRIPTION_RESPONSE with an unknown ric_id that has no corresponding pending event. The near-RT RIC uses assert() to enforce the existence of a pending event during response processing. A remote unauthenticated attacker can send a forged RIC_SUBSCRIPTION_RESPONSE to the near-RT RIC (port 36421) to cause SIGABRT in Debug builds or NULL pointer dereference (SIGSEGV) in Release builds. |
| FlexRIC v2.0.0 crashes when an SCTP association is closed before an E2_SETUP_REQUEST is sent. The near-RT RIC assumes a mapping between SCTP association and E2 node always exists in the cleanup path and enforces this via assert(). A remote unauthenticated attacker can crash the near-RT RIC (port 36421) by simply completing an SCTP handshake and immediately disconnecting, without sending any E2AP message. |
| A vulnerability was found in Tenda W12 3.0.0.7(4763). This issue affects the function cgiSysWebTimeoutSet of the file /bin/httpd of the component Web Management Interface. The manipulation of the argument web_over_time results in denial of service. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| A segmentation violation in the gf_media_get_color_info function (/media_tools/isom_tools.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted data file. |
| A heap use-after-free in the dasher_process function (/filters/dasher.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-2 file. |
| A segmentation violation in the gf_isom_apple_set_tag_ex function (/isomedia/isom_write.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A heap buffer overflow in the m2tsdmx_send_packet function (filters/dmx_m2ts.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme_fc_delete_assocation() waits for pending I/O to complete before
returning, and an error can cause ->ioerr_work to be queued after
cancel_work_sync() had been called. Move the call to cancel_work_sync() to
be after nvme_fc_delete_association() to ensure ->ioerr_work is not running
when the nvme_fc_ctrl object is freed. Otherwise the following can occur:
[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL
[ 1135.917705] ------------[ cut here ]------------
[ 1135.922336] kernel BUG at lib/list_debug.c:52!
[ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)
[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025
[ 1135.950969] Workqueue: 0x0 (nvme-wq)
[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b
[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046
[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000
[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0
[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08
[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100
[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0
[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000
[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0
[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1136.055910] PKRU: 55555554
[ 1136.058623] Call Trace:
[ 1136.061074] <TASK>
[ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.071898] ? move_linked_works+0x4a/0xa0
[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.081744] ? __die_body.cold+0x8/0x12
[ 1136.085584] ? die+0x2e/0x50
[ 1136.088469] ? do_trap+0xca/0x110
[ 1136.091789] ? do_error_trap+0x65/0x80
[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.101289] ? exc_invalid_op+0x50/0x70
[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20
[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.120806] move_linked_works+0x4a/0xa0
[ 1136.124733] worker_thread+0x216/0x3a0
[ 1136.128485] ? __pfx_worker_thread+0x10/0x10
[ 1136.132758] kthread+0xfa/0x240
[ 1136.135904] ? __pfx_kthread+0x10/0x10
[ 1136.139657] ret_from_fork+0x31/0x50
[ 1136.143236] ? __pfx_kthread+0x10/0x10
[ 1136.146988] ret_from_fork_asm+0x1a/0x30
[ 1136.150915] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Improve SCSI abort handling
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler. |
| A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger a write UAF crash in the GPU GLES user-space shared library. On certain platforms, when the process executing graphics workload has system privileges this could enable further exploits on the device. |
| An access bypass vulnerability in Drupal TFA Basic Plugins allows users with the administer users permission to view or generate recovery codes for other users.
This issue affects TFA Basic Plugins: from 7.x-1.0 through 7.x-1.2. |
| The TIFF decoder does not place a limit on the size of PackBits-compressed data. A maliciously-crafted image can exploit this to cause a small image (both in terms of pixel width/height and encoded size) to make the decoder decode large amounts of compressed data. |
| Missing Authorization vulnerability in Tomdever wpForo Forum allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects wpForo Forum: from n/a through 3.0.6. |
| A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger write UAF crash in the GPU GLES user-space shared library. On certain platforms, when the process executing graphics workload has system privileges this could enable subsequent exploit on the system. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to force GPU to write to arbitrary physical memory pages.
Under certain circumstances this exploit could be used to corrupt data pages not allocated by the GPU driver but memory pages in use by the kernel and drivers running on the platform altering their behaviour.
This attack can lead the GPU to perform write operations on restricted internal GPU buffers that can lead to a second order affect of corrupted arbitrary physical memory. |
| Incorrect Default Permissions vulnerability in Apache ActiveMQ.
This issue affects Apache ActiveMQ: before 5.19.7, from 6.0.0 before 6.2.6.
The default Jolokia authorization settings granted non-admin (low-privilege) web-login accounts access to Jolokia operations which allowed executing broker management operations meant for admins such as addQueue and removeQueue.
Users are recommended to upgrade to version 6.2.6 or 5.19.7, which fixes the issue. |
| Exposure of Sensitive Information Through Metadata vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
Brokers that are configured with a network connector with syncDurableSubs set to true, are vulnerable to an unauthenticated attacker who can receive a list of all durable topic subscriptions in the broker, including client identifiers, subscription names, topic destinations, and JMS selector expressions, by sending a BrokerInfo command. The broker incorrectly responds without first ensuring the connection is authenticated.
This issue affects Apache ActiveMQ Broker: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ All: before 5.19.7, from 6.0.0 before 6.2.6.
Users are recommended to upgrade to version 6.2.6 or 5.19.7, which fixes the issue. |
| Improper Input Validation, Improper Control of Generation of Code ('Code Injection') vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Non-parenthesized discovery wrappers such as `masterslave:vm://...,...`
and `static:vm://...` incorrectly pass validation allowing bypass of fix in CVE-2026-34197.
Original description from CVE-2026-34197.
Apache ActiveMQ exposes the Jolokia JMX-HTTP bridge at /api/jolokia/ on the web console. The default Jolokia access policy permits exec operations on all ActiveMQ MBeans (org.apache.activemq:*), including BrokerService.addNetworkConnector(String) and BrokerService.addConnector(String). An authenticated attacker can invoke these operations with a crafted discovery UR that triggers the VM transport's brokerConfig parameter to load a remote Spring XML application context using ResourceXmlApplicationContext. Because Spring's ResourceXmlApplicationContext instantiates all singleton beans before the BrokerService validates the configuration, arbitrary code execution occurs on the broker's JVM through bean factory methods such as Runtime.exec().
This issue affects Apache ActiveMQ Broker: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ All: before 5.19.7, from 6.0.0 before 6.2.6; Apache ActiveMQ: before 5.19.7, from 6.0.0 before 6.2.6.
Users are recommended to upgrade to version 5.19.7 or 6.2.6, which fixes the issue. |
| Lumiverse is a full-featured AI chat application. Prior to 0.9.7, the MCP server creation endpoint validates the command field against an allowlist of binary names but forwards the args array to the child process without any validation. Every binary on the allowlist accepts an inline-code execution flag (-e for node/bun, -c for python3/deno), giving any logged-in user arbitrary OS-level code execution on the Lumiverse server. The route requires only requireAuth (not requireOwner). The server binds on all interfaces (::) and the host-header rebinding check is bypassed trivially by any HTTP client that sends Host: localhost:<port> directly, making this exploitable from any machine with network access to the server port. This vulnerability is fixed in 0.9.7. |
