Total
276814 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-57839 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" This reverts commit 7c877586da3178974a8a94577b6045a48377ff25. Anders and Philippe have reported that recent kernels occasionally hang when used with NFS in readahead code. The problem has been bisected to 7c877586da3 ("readahead: properly shorten readahead when falling back to do_page_cache_ra()"). The cause of the problem is that ra->size can be shrunk by read_pages() call and subsequently we end up calling do_page_cache_ra() with negative (read huge positive) number of pages. Let's revert 7c877586da3 for now until we can find a proper way how the logic in read_pages() and page_cache_ra_order() can coexist. This can lead to reduced readahead throughput due to readahead window confusion but that's better than outright hangs. | ||||
| CVE-2024-57838 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: s390/entry: Mark IRQ entries to fix stack depot warnings The stack depot filters out everything outside of the top interrupt context as an uninteresting or irrelevant part of the stack traces. This helps with stack trace de-duplication, avoiding an explosion of saved stack traces that share the same IRQ context code path but originate from different randomly interrupted points, eventually exhausting the stack depot. Filtering uses in_irqentry_text() to identify functions within the .irqentry.text and .softirqentry.text sections, which then become the last stack trace entries being saved. While __do_softirq() is placed into the .softirqentry.text section by common code, populating .irqentry.text is architecture-specific. Currently, the .irqentry.text section on s390 is empty, which prevents stack depot filtering and de-duplication and could result in warnings like: Stack depot reached limit capacity WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8 with PREEMPT and KASAN enabled. Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into the .irqentry.text section and updating the kprobes blacklist to include the .irqentry.text section. This is done only for asynchronous interrupts and explicitly not for program checks, which are synchronous and where the context beyond the program check is important to preserve. Despite machine checks being somewhat in between, they are extremely rare, and preserving context when possible is also of value. SVCs and Restart Interrupts are not relevant, one being always at the boundary to user space and the other being a one-time thing. IRQ entries filtering is also optionally used in ftrace function graph, where the same logic applies. | ||||
| CVE-2024-57809 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases] | ||||
| CVE-2024-57807 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix for a potential deadlock This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1 ---- ---- lock(&instance->reset_mutex); lock(&shost->scan_mutex); lock(&instance->reset_mutex); lock(&shost->scan_mutex); Fix this by temporarily releasing the reset_mutex. | ||||
| CVE-2024-57806 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction atomicity bug when enabling simple quotas Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction. | ||||
| CVE-2024-57805 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP The linkDMA should not be released on stop trigger since a stream re-start might happen without closing of the stream. This leaves a short time for other streams to 'steal' the linkDMA since it has been released. This issue is not easy to reproduce under normal conditions as usually after stop the stream is closed, or the same stream is restarted, but if another stream got in between the stop and start, like this: aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120 CTRL+z aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120 then the link DMA channels will be mixed up, resulting firmware error or crash. | ||||
| CVE-2024-57804 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. | ||||
| CVE-2024-57800 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: memalloc: prefer dma_mapping_error() over explicit address checking With CONFIG_DMA_API_DEBUG enabled, the following warning is observed: DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single] WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430 CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759 debug_dma_unmap_page+0xe9/0xf0 snd_dma_wc_free+0x85/0x130 [snd_pcm] snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm] snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm] snd_pcm_ioctl+0x6a/0xc0 [snd_pcm] ... Check for returned DMA addresses using specialized dma_mapping_error() helper which is generally recommended for this purpose by Documentation/core-api/dma-api.rst. | ||||
| CVE-2024-57799 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). | ||||
| CVE-2024-57798 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL. This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req(). Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used. v2: Fix kfreeing the request if getting an mst_primary reference fails. | ||||
| CVE-2024-57793 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. Leak the decrypted memory when set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call WARN_ONCE(). | ||||
| CVE-2024-57792 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: power: supply: gpio-charger: Fix set charge current limits Fix set charge current limits for devices which allow to set the lowest charge current limit to be greater zero. If requested charge current limit is below lowest limit, the index equals current_limit_map_size which leads to accessing memory beyond allocated memory. | ||||
| CVE-2024-57791 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check return value of sock_recvmsg when draining clc data When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen. This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining. | ||||
| CVE-2024-56788 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: fix tx skb race condition between reference pointers There are two skb pointers to manage tx skb's enqueued from n/w stack. waiting_tx_skb pointer points to the tx skb which needs to be processed and ongoing_tx_skb pointer points to the tx skb which is being processed. SPI thread prepares the tx data chunks from the tx skb pointed by the ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is processed, the tx skb pointed by the waiting_tx_skb is assigned to ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL. Whenever there is a new tx skb from n/w stack, it will be assigned to waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb handled in two different threads. Consider a scenario where the SPI thread processed an ongoing_tx_skb and it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer without doing any NULL check. At this time, if the waiting_tx_skb pointer is NULL then ongoing_tx_skb pointer is also assigned with NULL. After that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w stack and there is a chance to overwrite the tx skb pointer with NULL in the SPI thread. Finally one of the tx skb will be left as unhandled, resulting packet missing and memory leak. - Consider the below scenario where the TXC reported from the previous transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be transported in 20 TXCs and waiting_tx_skb is still NULL. tx_credits = 10; /* 21 are filled in the previous transfer */ ongoing_tx_skb = 20; waiting_tx_skb = NULL; /* Still NULL */ - So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true. - After oa_tc6_prepare_spi_tx_buf_for_tx_skbs() ongoing_tx_skb = 10; waiting_tx_skb = NULL; /* Still NULL */ - Perform SPI transfer. - Process SPI rx buffer to get the TXC from footers. - Now let's assume previously filled 21 TXCs are freed so we are good to transport the next remaining 10 tx chunks from ongoing_tx_skb. tx_credits = 21; ongoing_tx_skb = 10; waiting_tx_skb = NULL; - So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again. - In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs() ongoing_tx_skb = NULL; waiting_tx_skb = NULL; - Now the below bad case might happen, Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler) --------------------------- ----------------------------------- - if waiting_tx_skb is NULL - if ongoing_tx_skb is NULL - ongoing_tx_skb = waiting_tx_skb - waiting_tx_skb = skb - waiting_tx_skb = NULL ... - ongoing_tx_skb = NULL - if waiting_tx_skb is NULL - waiting_tx_skb = skb To overcome the above issue, protect the moving of tx skb reference from waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb to waiting_tx_skb pointer, so that the other thread can't access the waiting_tx_skb pointer until the current thread completes moving the tx skb reference safely. | ||||
| CVE-2024-56372 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: tun: fix tun_napi_alloc_frags() syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-56369 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/modes: Avoid divide by zero harder in drm_mode_vrefresh() drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*... | ||||
| CVE-2024-56368 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix overflow in __rb_map_vma An overflow occurred when performing the following calculation: nr_pages = ((nr_subbufs + 1) << subbuf_order) - pgoff; Add a check before the calculation to avoid this problem. syzbot reported this as a slab-out-of-bounds in __rb_map_vma: BUG: KASAN: slab-out-of-bounds in __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 Read of size 8 at addr ffff8880767dd2b8 by task syz-executor187/5836 CPU: 0 UID: 0 PID: 5836 Comm: syz-executor187 Not tainted 6.13.0-rc2-syzkaller-00159-gf932fb9b4074 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xc3/0x620 mm/kasan/report.c:489 kasan_report+0xd9/0x110 mm/kasan/report.c:602 __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058 ring_buffer_map+0x56e/0x9b0 kernel/trace/ring_buffer.c:7138 tracing_buffers_mmap+0xa6/0x120 kernel/trace/trace.c:8482 call_mmap include/linux/fs.h:2183 [inline] mmap_file mm/internal.h:124 [inline] __mmap_new_file_vma mm/vma.c:2291 [inline] __mmap_new_vma mm/vma.c:2355 [inline] __mmap_region+0x1786/0x2670 mm/vma.c:2456 mmap_region+0x127/0x320 mm/mmap.c:1348 do_mmap+0xc00/0xfc0 mm/mmap.c:496 vm_mmap_pgoff+0x1ba/0x360 mm/util.c:580 ksys_mmap_pgoff+0x32c/0x5c0 mm/mmap.c:542 __do_sys_mmap arch/x86/kernel/sys_x86_64.c:89 [inline] __se_sys_mmap arch/x86/kernel/sys_x86_64.c:82 [inline] __x64_sys_mmap+0x125/0x190 arch/x86/kernel/sys_x86_64.c:82 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reproducer for this bug is: ------------------------8<------------------------- #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <asm/types.h> #include <sys/mman.h> int main(int argc, char **argv) { int page_size = getpagesize(); int fd; void *meta; system("echo 1 > /sys/kernel/tracing/buffer_size_kb"); fd = open("/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY); meta = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, page_size * 5); } ------------------------>8------------------------- | ||||
| CVE-2024-55916 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening. | ||||
| CVE-2024-55881 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Play nice with protected guests in complete_hypercall_exit() Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit hypercall when completing said hypercall. For guests with protected state, e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit mode as the vCPU state needed to detect 64-bit mode is unavailable. Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE hypercall via VMGEXIT trips the WARN: ------------[ cut here ]------------ WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm] Modules linked in: kvm_amd kvm ... [last unloaded: kvm] CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470 Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024 RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm] kvm_vcpu_ioctl+0x54f/0x630 [kvm] __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-55642 | 2025-01-11 | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: block: Prevent potential deadlocks in zone write plug error recovery Zone write plugging for handling writes to zones of a zoned block device always execute a zone report whenever a write BIO to a zone fails. The intent of this is to ensure that the tracking of a zone write pointer is always correct to ensure that the alignment to a zone write pointer of write BIOs can be checked on submission and that we can always correctly emulate zone append operations using regular write BIOs. However, this error recovery scheme introduces a potential deadlock if a device queue freeze is initiated while BIOs are still plugged in a zone write plug and one of these write operation fails. In such case, the disk zone write plug error recovery work is scheduled and executes a report zone. This in turn can result in a request allocation in the underlying driver to issue the report zones command to the device. But with the device queue freeze already started, this allocation will block, preventing the report zone execution and the continuation of the processing of the plugged BIOs. As plugged BIOs hold a queue usage reference, the queue freeze itself will never complete, resulting in a deadlock. Avoid this problem by completely removing from the zone write plugging code the use of report zones operations after a failed write operation, instead relying on the device user to either execute a report zones, reset the zone, finish the zone, or give up writing to the device (which is a fairly common pattern for file systems which degrade to read-only after write failures). This is not an unreasonnable requirement as all well-behaved applications, FSes and device mapper already use report zones to recover from write errors whenever possible by comparing the current position of a zone write pointer with what their assumption about the position is. The changes to remove the automatic error recovery are as follows: - Completely remove the error recovery work and its associated resources (zone write plug list head, disk error list, and disk zone_wplugs_work work struct). This also removes the functions disk_zone_wplug_set_error() and disk_zone_wplug_clear_error(). - Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write plug whenever a write opration targetting the zone of the zone write plug fails. This flag indicates that the zone write pointer offset is not reliable and that it must be updated when the next report zone, reset zone, finish zone or disk revalidation is executed. - Modify blk_zone_write_plug_bio_endio() to set the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed write BIO. - Modify the function disk_zone_wplug_set_wp_offset() to clear this new flag, thus implementing recovery of a correct write pointer offset with the reset (all) zone and finish zone operations. - Modify blkdev_report_zones() to always use the disk_report_zones_cb() callback so that disk_zone_wplug_sync_wp_offset() can be called for any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag. This implements recovery of a correct write pointer offset for zone write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within the range of the report zones operation executed by the user. - Modify blk_revalidate_seq_zone() to call disk_zone_wplug_sync_wp_offset() for all sequential write required zones when a zoned block device is revalidated, thus always resolving any inconsistency between the write pointer offset of zone write plugs and the actual write pointer position of sequential zones. | ||||