Total
285354 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-46662 | 1 Fortinet | 1 Fortimanager | 2025-03-15 | 8.3 High |
| A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiManager versions 7.4.1 through 7.4.3, FortiManager Cloud versions 7.4.1 through 7.4.3 allows attacker to escalation of privilege via specifically crafted packets | ||||
| CVE-2025-2000 | 2025-03-15 | 9.8 Critical | ||
| A maliciously crafted QPY file can potential execute arbitrary-code embedded in the payload without privilege escalation when deserialising QPY formats < 13. A python process calling Qiskit 0.18.0 through 1.4.1's `qiskit.qpy.load()` function could potentially execute any arbitrary Python code embedded in the correct place in the binary file as part of specially constructed payload. | ||||
| CVE-2024-45643 | 1 Ibm | 1 Security Qradar Edr | 2025-03-15 | 5.9 Medium |
| IBM Security QRadar 3.12 EDR uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive credential information. | ||||
| CVE-2024-46852 | 1 Linux | 1 Linux Kernel | 2025-03-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: heaps: Fix off-by-one in CMA heap fault handler Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. | ||||
| CVE-2024-26006 | 1 Fortinet | 1 Fortios | 2025-03-15 | 6.9 Medium |
| An improper neutralization of input during web page Generation vulnerability [CWE-79] in FortiOS version 7.4.3 and below, version 7.2.7 and below, version 7.0.13 and below and FortiProxy version 7.4.3 and below, version 7.2.9 and below, version 7.0.16 and below web SSL VPN UI may allow a remote unauthenticated attacker to perform a Cross-Site Scripting attack via a malicious samba server. | ||||
| CVE-2023-6717 | 1 Redhat | 15 Amq Broker, Build Keycloak, Jboss Data Grid and 12 more | 2025-03-15 | 6 Medium |
| A flaw was found in the SAML client registration in Keycloak that could allow an administrator to register malicious JavaScript URIs as Assertion Consumer Service POST Binding URLs (ACS), posing a Cross-Site Scripting (XSS) risk. This issue may allow a malicious admin in one realm or a client with registration access to target users in different realms or applications, executing arbitrary JavaScript in their contexts upon form submission. This can enable unauthorized access and harmful actions, compromising the confidentiality, integrity, and availability of the complete KC instance. | ||||
| CVE-2023-6563 | 1 Redhat | 9 Build Keycloak, Enterprise Linux, Keycloak and 6 more | 2025-03-15 | 7.7 High |
| An unconstrained memory consumption vulnerability was discovered in Keycloak. It can be triggered in environments which have millions of offline tokens (> 500,000 users with each having at least 2 saved sessions). If an attacker creates two or more user sessions and then open the "consents" tab of the admin User Interface, the UI attempts to load a huge number of offline client sessions leading to excessive memory and CPU consumption which could potentially crash the entire system. | ||||
| CVE-2025-1657 | 2025-03-15 | 8.8 High | ||
| The Directory Listings WordPress plugin – uListing plugin for WordPress is vulnerable to unauthorized modification of data and PHP Object Injection due to a missing capability check on the stm_listing_ajax AJAX action in all versions up to, and including, 2.1.7. This makes it possible for authenticated attackers, with subscriber-level access and above, to update post meta data and inject PHP Objects that may be unserialized. | ||||
| CVE-2025-1653 | 2025-03-15 | 8.8 High | ||
| The Directory Listings WordPress plugin – uListing plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.1.7. This is due to the stm_listing_profile_edit AJAX action not having enough restriction on the user meta that can be updated. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to that of an administrator. | ||||
| CVE-2025-26465 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.8 Medium |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. | ||||
| CVE-2025-1118 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 4.4 Medium |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. | ||||
| CVE-2025-0677 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.4 Medium |
| A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms. | ||||
| CVE-2025-0622 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.4 Medium |
| A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections. | ||||
| CVE-2024-2467 | 1 Redhat | 2 Enterprise Linux, Openssl | 2025-03-15 | 5.9 Medium |
| A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode. | ||||
| CVE-2025-0690 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.1 Medium |
| The read command is used to read the keyboard input from the user, while reads it keeps the input length in a 32-bit integer value which is further used to reallocate the line buffer to accept the next character. During this process, with a line big enough it's possible to make this variable to overflow leading to a out-of-bounds write in the heap based buffer. This flaw may be leveraged to corrupt grub's internal critical data and secure boot bypass is not discarded as consequence. | ||||
| CVE-2024-45783 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 4.4 Medium |
| A flaw was found in grub2. When failing to mount an HFS+ grub, the hfsplus filesystem driver doesn't properly set an ERRNO value. This issue may lead to a NULL pointer access. | ||||
| CVE-2024-45781 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.7 Medium |
| A flaw was found in grub2. When reading a symbolic link's name from a UFS filesystem, grub2 fails to validate the string length taken as an input. The lack of validation may lead to a heap out-of-bounds write, causing data integrity issues and eventually allowing an attacker to circumvent secure boot protections. | ||||
| CVE-2024-45776 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.7 Medium |
| When reading the language .mo file in grub_mofile_open(), grub2 fails to verify an integer overflow when allocating its internal buffer. A crafted .mo file may lead the buffer size calculation to overflow, leading to out-of-bound reads and writes. This flaw allows an attacker to leak sensitive data or overwrite critical data, possibly circumventing secure boot protections. | ||||
| CVE-2024-45775 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 5.2 Medium |
| A flaw was found in grub2 where the grub_extcmd_dispatcher() function calls grub_arg_list_alloc() to allocate memory for the grub's argument list. However, it fails to check in case the memory allocation fails. Once the allocation fails, a NULL point will be processed by the parse_option() function, leading grub to crash or, in some rare scenarios, corrupt the IVT data. | ||||
| CVE-2024-45774 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-03-15 | 6.7 Medium |
| A flaw was found in grub2. A specially crafted JPEG file can cause the JPEG parser of grub2 to incorrectly check the bounds of its internal buffers, resulting in an out-of-bounds write. The possibility of overwriting sensitive information to bypass secure boot protections is not discarded. | ||||