| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in Chanjet TPlus up to 20251121. Affected by this vulnerability is an unknown functionality of the file /tplus/ajaxpro/Ufida.T.SM.UIP.MultiCompanySettingController,Ufida.T.SM.UIP.ashx?method=Load. This manipulation of the argument currentAccId causes sql injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker (with elevated privileges) to read and modify the Appliance SSD contents (because they are unencrypted). |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker with elevated privileges to falsify tamper events by accessing internal components. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a Physically Proximate Attacker to Escalate Privileges by enabling the USB interface through chassis probe insertion during system boot, aka "Unauthorized Reactivation of the USB interface" or F01. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a Physically Proximate Attacker to access the internal components of the appliance, without leaving tamper evidence. To exploit this, the attacker needs to remove the tamper label and all fixing screws from the device without damaging it. This is called an F14 attack. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow an attacker to gain access the the BIOS menu because is has no password. |
| A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in RashminDungrani online-banking up to 2337ad552ea9d385b4e07b90e6f32d011b7c68a2. This affects an unknown part of the file /site/dist/auth_login.php. Performing manipulation of the argument Username results in sql injection. The attack can be initiated remotely. The exploit has been made public and could be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| Collabora Online - Built-in CODE Server (richdocumentscode) provides a built-in server with all of the document editing features of Collabora Online. In versions prior to 25.04.702, Collabora Online has a Configuration-Dependent RCE (OS Command Injection) in richdocumentscode proxy. Users of Nextcloud with Collabora Online - Built-in CODE Server app can be vulnerable to attack via proxy.php and an intermediate reverse proxy. This vulnerability is fixed in 25.04.702. |
| Apache HTTP Server 2.4.65 and earlier with Server Side Includes (SSI) enabled and mod_cgid (but not mod_cgi) passes the shell-escaped query string to #exec cmd="..." directives.
This issue affects Apache HTTP Server before 2.4.66.
Users are recommended to upgrade to version 2.4.66, which fixes the issue. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker to escalate privileges by editing the Legacy GRUB bootloader configuration to start a root shell upon boot of the host OS. This is called F06. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker to modify or erase tamper events via the Chassis management board. |
| An OS command injection vulnerability has been reported to affect Media Streaming add-on. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network.
We have already fixed the vulnerability in the following version:
Media Streaming add-on 500.1.1.5 ( 2024/01/22 ) and later
|
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a stack overflow can occur on large HTTP file transfers if the user has increased the HTTP response body limit and enabled the logging of printable http bodies. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves using default HTTP response body limits and/or disabling http-body-printable logging; body logging is disabled by default. |
| A denial of service vulnerability exists in the Modbus TCP and Modbus RTU over TCP functionality of Socomec DIRIS Digiware M-70 1.6.9. A specially crafted series of network requests can lead to a denial of service. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.An attacker can trigger this denial-of-service condition by sending a sequence of Modbus TCP messages to port 502 using the Write Single Register function code (6). The attack sequence begins with a message to register 58112 with a value of 1000, indicating that a configuration change will follow. Next, a message is sent to register 29440 with a value corresponding to the new Modbus address to be configured. Finally, a message to register 57856 with a value of 161 commits the configuration change. After this configuration change, the device will be in a denial-of-service state. |
| An exposure of sensitive information vulnerability has been reported to affect QNAP AI Core. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
QNAP AI Core 3.4.1 and later |
| A denial of service vulnerability exists in the Modbus TCP and Modbus RTU over TCP functionality of Socomec DIRIS Digiware M-70 1.6.9. A specially crafted series of network requests can lead to a denial of service. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.An attacker can trigger this denial-of-service condition by sending a single Modbus TCP message to port 502 using the Write Single Register function code (6) to write the value 1 to register 4352. This action changes the Modbus address to 15. After this message is sent, the device will be in a denial-of-service state. |
| A link following vulnerability has been reported to affect QuLog Center. If exploited, the vulnerability could allow remote attackers to traverse the file system to unintended locations and read or overwrite the contents of unexpected files.
We have already fixed the vulnerability in the following versions:
QuLog Center 1.7.0.831 ( 2024/10/15 ) and later
QuLog Center 1.8.0.888 ( 2024/10/15 ) and later |
| A vulnerability was found in ageerle ruoyi-ai up to 2.0.1 and classified as critical. Affected by this issue is some unknown functionality of the file ruoyi-modules/ruoyi-system/src/main/java/org/ruoyi/system/controller/system/SysModelController.java of the component API Interface. The manipulation leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.0.2 is able to address this issue. The name of the patch is c0daf641fb25b244591b7a6c3affa35c69d321fe. It is recommended to upgrade the affected component. |
| The Booster for WooCommerce plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'add_files_to_order' function in all versions up to, and including, 7.2.4. This makes it possible for unauthenticated attackers to upload arbitrary files with double extensions on the affected site's server which may make remote code execution possible. This is only exploitable on select instances where the configuration will execute the first extension present. |
