| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer overflow vulnerability in Panasonic Industry USB Driver for MINAS A5/A6 allows
attackers to stop Windows. |
| The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when CONFIG_MCUMGR_GRP_SETTINGS_BUFFER_TYPE_HEAP is enabled, relying on the end: label to k_free() them. When CONFIG_MCUMGR_GRP_SETTINGS_ACCESS_HOOK is also enabled and the application access hook rejects a request by returning status MGMT_CB_ERROR_RC, the handler executed return ret_rc; directly, bypassing end: and leaking the heap allocation on every rejected request.
The settings handlers are reachable over the unauthenticated SMP transport (Bluetooth LE, UART, or UDP, depending on product configuration). The access hook is the mechanism applications use to deny unauthorized settings access, and MGMT_CB_ERROR_RC is a common rejection style, so an attacker who can send settings read/write/delete commands that the hook rejects triggers a heap leak on each attempt.
Because the leaked memory is never reclaimed until reboot, a sustained stream of rejected requests monotonically exhausts the kernel heap until k_malloc() fails, denying mcumgr service and impacting any other heap consumer on the device — a denial of service. The impact is availability-only; there is no memory corruption or information disclosure. Only configurations that select the heap buffer type, enable the access hook, and register a hook that returns MGMT_CB_ERROR_RC are affected (the default stack buffer type cannot leak). |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to limit the amount of memory allocated when decoding uploaded image files which allows an authenticated user to cause excessive server memory consumption and potential denial of service via uploading a specially crafted image as a profile picture, channel file attachment, team icon, or custom brand image. Mattermost Advisory ID: MMSA-2026-00719 |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to enforce the board-creation permission which allows an unauthorized authenticated user to create boards via the board duplicate, boards-and-blocks, and archive-import endpoints.. Mattermost Advisory ID: MMSA-2026-00715 |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to parse Markdown autolinks with unmatched trailing closing parentheses in linear time, which allows an authenticated user with permission to create posts to cause excessive server CPU consumption and degrade availability for other users via specially crafted post or message attachment content. Mattermost Advisory ID: MMSA-2026-00703 |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate channel action ownership which allows channel managers to update actions in other channels via the channel action update endpoint.. Mattermost Advisory ID: MMSA-2026-00692 |
| An issue was discovered in Samsung Exynos Mobile Processor, Automotive Processor, and Modem Exynos 9810, Exynos 9610, Exynos 9820, Exynos 980, Exynos 850, Exynos 1080, Exynos 2100, Exynos 2200, Exynos 1280, Exynos 1380, Exynos 1330, Exynos 9110, Exynos W920, Exynos Modem 5123, Exynos Modem 5300, an Exynos Auto T5123. In the Shannon SM Task, improper handling of a loop with an unreachable exit condition cannot guarantee the termination of a required service via a malformed SM message. |
| A weakness has been identified in marcobambini Gravity up to 0.9.7. The impacted element is an unknown function of the file src/utils/gravity_json.c of the component JSON parser. This manipulation causes memory corruption. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 0.9.8 is sufficient to resolve this issue. Patch name: 9b337c3eae5833c3956bed1fc01c21c14fd443f2. It is suggested to upgrade the affected component. |
| n8n is an open source workflow automation platform. Prior to 1.123.76, 2.37.7, and 2.38.2, the OpenAI Chat Model node enforced credential allowed-domain restrictions for normal calls but not for the model-search dropdown. A workflow editor could set options.baseURL to an arbitrary host and make the searchModels path send the openAiApi credential there. The affected implementation is packages/@n8n/nodes-langchain/nodes/llms/LMChatOpenAi/methods/loadModels.ts, which omitted assertOpenAiCredentialAllowsUrl. This issue is fixed in versions 1.123.76, 2.37.7 and 2.38.2. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/itimer: Zero-init old itimerval before copy to userspace
On native sparc64, struct __kernel_old_timeval contains a four-byte hole
after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit.
put_itimerval() fills only the named fields in a stack-allocated
__kernel_old_itimerval and copies the entire object to userspace, so
getitimer() can expose the two padding holes.
Zero-initialize the aggregate before assigning the fields so implicit
padding is deterministic before it crosses the user/kernel boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
migrate_pages_batch() unmaps each folio before moving it, and every
unmap runs the mmu_notifier invalidate callbacks. On KVM hosts
try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() ->
tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps
the CPU busy for a long time.
The loop already calls cond_resched(), but on PREEMPTION kernels that is
a no-op, and involuntary preemption is not a Tasks-RCU quiescent state.
A long batch therefore never reports a quiescent state, and the
migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the
Tasks-RCU grace period for minutes, which is common at Meta fleet:
INFO: rcu_tasks detected stalls on tasks:
0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task
Call Trace:
tdp_mmu_zap_leafs
tdp_mmu_next_root
gfn_to_pfn_cache_invalidate_start
kvm_mmu_notifier_invalidate_range_start
__mmu_notifier_invalidate_range_start
try_to_migrate_one
try_to_migrate
migrate_pages_batch
migrate_pages
compact_zone
compact_node
kcompactd
kthread
Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even
when cond_resched() does nothing.
This has also been discussed at [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded time, and the scan loop
in shrink_lruvec() only calls cond_resched(), which is a no-op on
PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent
state, so the reclaiming task never reports one and becomes a holdout.
Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state
even when cond_resched() does nothing.
PS: This has been discussed in [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin under
the current limit and returns true without killing, while the writer still
compares usage against its stale target and records another OOM event.
Check the current limit at the start of each reclaim iteration and stop if
it no longer matches the writer's target.
Reproducer:
Populate a cgroup with anonymous memory and disable swapping. Lower
memory.max from one open file, then restore it to "max" through another
open file after the new limit becomes visible.
Without the patch, the first writer remains blocked and repeatedly
increments the OOM event counter. With the patch, it returns normally.
This was not motivated by a reported production workload. We found it
through automated randomized testing for our cgroup observability work
and reduced it to the reproducer above. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix off-by-one in port I/O handling
handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use:
u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
GENMASK(h, l) includes bit h. For size=1 (INB), this produces
GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8
bits). The mask is one bit too wide for all I/O sizes.
Fix the mask calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr
ffff888005010d30 by task init/44
Call Trace:
<TASK>
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
current_user_event_mm+0x51/0x1d0
user_events_ioctl+0x82e/0x15c0
__x64_sys_ioctl+0x139/0x1c0
do_syscall_64+0xce/0x450
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 44:
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x180/0x3a0
user_event_mm_alloc+0x3c/0x1f0
current_user_event_mm+0x88/0x1d0
Freed by task 42:
__kasan_slab_free+0x43/0x70
kfree+0x13a/0x390
process_one_work+0x696/0xf90
worker_thread+0x420/0xba0
The fix simply clears the copied pointer before any possible failure.
In case of failure, the child then has nothing to free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching the ring-buffer self-test fix in commit
91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry, leaving a dangling pointer and leaking the
trace_array reference it holds.
A later hist trigger that references a variable makes find_var_file()
walk tr->hist_vars and dereference the freed hist_data. The bug is
reproducible from userspace by writing three hist triggers to tracefs:
cd /sys/kernel/tracing
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger
echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger
The third write panics the kernel:
BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290
Read of size 8 at addr ffff888001f8a0e0 by task sh/1
CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N
Call Trace:
find_var_file.part.0
find_event_var
parse_atom
parse_expr
__create_val_field
event_hist_trigger_parse
trigger_process_regex
event_trigger_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Allocated by task 1:
event_hist_trigger_parse
Freed by task 1:
hist_register_trigger+0x618/0xa30
event_hist_trigger_parse
The buggy address belongs to freed 2048-byte region
Oops: general protection fault ... RIP: find_var_file.part.0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix by removing the hist_data from tr->hist_vars and releasing the
trace_array reference in the named-data branch of hist_register_trigger()
before freeing the hist_data. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
