| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ETERNUS SF provided by Fsas Technologies Inc. contains an incorrect default permissions vulnerability. A low-privileged user with access to the management server may obtain database credentials, potentially allowing execution of OS commands with administrator privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: Fix buffer overflow in USB transport layer
A buffer overflow vulnerability exists in the USB 9pfs transport layer
where inconsistent size validation between packet header parsing and
actual data copying allows a malicious USB host to overflow heap buffers.
The issue occurs because:
- usb9pfs_rx_header() validates only the declared size in packet header
- usb9pfs_rx_complete() uses req->actual (actual received bytes) for
memcpy
This allows an attacker to craft packets with small declared size
(bypassing validation) but large actual payload (triggering overflow
in memcpy).
Add validation in usb9pfs_rx_complete() to ensure req->actual does not
exceed the buffer capacity before copying data. |
| A vulnerability has been found in Tomofun Furbo 360 and Furbo Mini. Impacted is an unknown function of the file TF_FQDN.json of the component GATT Interface URL Handler. Such manipulation leads to server-side request forgery. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is considered difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Mangati NovoSGA up to 2.2.9. The impacted element is an unknown function of the file /admin of the component SVG File Handler. Performing manipulation of the argument logoNavbar/logoLogin results in cross site scripting. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. |
| A vulnerability was identified in Portabilis i-Educar up to 2.10. Impacted is an unknown function of the file /intranet/educar_calendario_anotacao_cad.php. Such manipulation of the argument nm_anotacao/descricao leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in Portabilis i-Educar up to 2.10. The affected element is an unknown function of the file /intranet/educar_turma_tipo_cad.php. Such manipulation of the argument nm_tipo leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A weakness has been identified in Portabilis i-Educar up to 2.10. Impacted is an unknown function of the file /intranet/educar_modulo_cad.php. This manipulation of the argument nm_tipo/descricao causes cross site scripting. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. |
| A vulnerability was determined in Tomofun Furbo 360 and Furbo Mini. The impacted element is an unknown function of the file /etc/shadow of the component Password Handler. Executing manipulation can lead to use of weak hash. The physical device can be targeted for the attack. The attack requires a high level of complexity. The exploitability is regarded as difficult. The exploit has been publicly disclosed and may be utilized. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Tomofun Furbo 360 and Furbo Mini. The affected element is an unknown function of the component Root Account Handler. Performing manipulation results in use of hard-coded password. The attack must be initiated from a local position. The attack is considered to have high complexity. The exploitability is described as difficult. The exploit has been made public and could be used. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| Document Management System developed by Excellent Infotek has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| A weakness has been identified in bftpd up to 6.2. Impacted is the function expand_groups of the file options.c of the component Configuration File Handler. Executing manipulation can lead to heap-based buffer overflow. It is possible to launch the attack on the local host. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in LogicalDOC Community Edition up to 9.2.1. This issue affects some unknown processing of the file /frontend.jsp of the component Add Contact Page. Performing manipulation of the argument First Name/Last Name/Company/Address/Phone/Mobile results in cross site scripting. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in toeverything AFFiNE up to 0.24.1. This vulnerability affects unknown code of the component Avatar Upload Image Endpoint. Such manipulation leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in givanz Vvveb up to 1.0.7.3. This affects the function Import of the file admin/controller/tools/import.php of the component Raw SQL Handler. This manipulation causes sql injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: 52204b4a106b2fb02d16eee06a88a1f2697f9b35. It is recommended to apply a patch to fix this issue. |
| A vulnerability has been found in 70mai X200 up to 20251010. Affected by this vulnerability is an unknown functionality of the component HTTP Web Server. The manipulation leads to use of default credentials. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in e107 CMS up to 2.3.3. This impacts an unknown function of the file /e107_admin/image.php?mode=main&action=avatar of the component Avatar Handler. Performing manipulation of the argument multiaction[] results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
