Filtered by vendor Cisco
Subscriptions
Filtered by product Firepower 4140
Subscriptions
Total
53 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-1368 | 1 Cisco | 101 Firepower 4110, Firepower 4112, Firepower 4115 and 98 more | 2024-11-08 | 8.8 High |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco UDLD process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. The attacker needs full control of a directly connected device. That device must be connected over a port channel that has UDLD enabled. To trigger arbitrary code execution, both the UDLD-enabled port channel and specific system conditions must exist. In the absence of either the UDLD-enabled port channel or the system conditions, attempts to exploit this vulnerability will result in a DoS condition. It is possible, but highly unlikely, that an attacker could control the necessary conditions for exploitation. The CVSS score reflects this possibility. However, given the complexity of exploitation, Cisco has assigned a Medium Security Impact Rating (SIR) to this vulnerability. | ||||
| CVE-2021-1448 | 1 Cisco | 10 Firepower 4110, Firepower 4112, Firepower 4115 and 7 more | 2024-11-08 | 7.8 High |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | ||||
| CVE-2021-1489 | 1 Cisco | 18 Firepower 1010, Firepower 1120, Firepower 1140 and 15 more | 2024-11-08 | 6.5 Medium |
| A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state. | ||||
| CVE-2021-34714 | 1 Cisco | 225 Firepower 4100, Firepower 4110, Firepower 4112 and 222 more | 2024-11-07 | 7.4 High |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process. | ||||
| CVE-2022-20625 | 1 Cisco | 110 Firepower 4110, Firepower 4112, Firepower 4115 and 107 more | 2024-11-06 | 4.3 Medium |
| A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart. | ||||
| CVE-2022-20795 | 1 Cisco | 29 Adaptive Security Appliance, Adaptive Security Appliance Software, Asa 5505 and 26 more | 2024-11-06 | 5.8 Medium |
| A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully. | ||||
| CVE-2022-20751 | 1 Cisco | 23 Firepower 1000, Firepower 1010, Firepower 1020 and 20 more | 2024-11-06 | 8.6 High |
| A vulnerability in the Snort detection engine integration for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause unlimited memory consumption, which could lead to a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient memory management for certain Snort events. An attacker could exploit this vulnerability by sending a series of crafted IP packets that would generate specific Snort events on an affected device. A sustained attack could cause an out of memory condition on the affected device. A successful exploit could allow the attacker to interrupt all traffic flowing through the affected device. In some circumstances, the attacker may be able to cause the device to reload, resulting in a DoS condition. | ||||
| CVE-2022-20865 | 1 Cisco | 24 Firepower 4110, Firepower 4110 Firmware, Firepower 4112 and 21 more | 2024-11-06 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The attacker would need to have Administrator privileges on the device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | ||||
| CVE-2022-20829 | 1 Cisco | 25 Adaptive Security Device Manager, Asa 5512-x, Asa 5512-x Firmware and 22 more | 2024-11-01 | 9.1 Critical |
| A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisco ASA Software. An attacker could exploit this vulnerability by installing a crafted ASDM image on the device that is running Cisco ASA Software and then waiting for a targeted user to access that device using ASDM. A successful exploit could allow the attacker to execute arbitrary code on the machine of the targeted user with the privileges of that user on that machine. Notes: To successfully exploit this vulnerability, the attacker must have administrative privileges on the device that is running Cisco ASA Software. Potential targets are limited to users who manage the same device that is running Cisco ASA Software using ASDM. Cisco has released and will release software updates that address this vulnerability. | ||||
| CVE-2022-20828 | 1 Cisco | 20 Asa Firepower, Firepower 1010, Firepower 1120 and 17 more | 2024-11-01 | 6.5 Medium |
| A vulnerability in the CLI parser of Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected ASA FirePOWER module as the root user. This vulnerability is due to improper handling of undefined command parameters. An attacker could exploit this vulnerability by using a crafted command on the CLI or by submitting a crafted HTTPS request to the web-based management interface of the Cisco ASA that is hosting the ASA FirePOWER module. Note: To exploit this vulnerability, the attacker must have administrative access to the Cisco ASA. A user who has administrative access to a particular Cisco ASA is also expected to have administrative access to the ASA FirePOWER module that is hosted by that Cisco ASA. | ||||
| CVE-2022-20866 | 1 Cisco | 34 Adaptive Security Appliance Software, Asa 5506-x, Asa 5506h-x and 31 more | 2024-11-01 | 7.4 High |
| A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. | ||||
| CVE-2023-20015 | 1 Cisco | 39 Firepower 4100, Firepower 4110, Firepower 4112 and 36 more | 2024-10-28 | 6 Medium |
| A vulnerability in the CLI of Cisco Firepower 4100 Series, Cisco Firepower 9300 Security Appliances, and Cisco UCS 6200, 6300, 6400, and 6500 Series Fabric Interconnects could allow an authenticated, local attacker to inject unauthorized commands. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute unauthorized commands within the CLI. An attacker with Administrator privileges could also execute arbitrary commands on the underlying operating system of Cisco UCS 6400 and 6500 Series Fabric Interconnects with root-level privileges. | ||||
| CVE-2023-20016 | 1 Cisco | 39 Firepower 4100, Firepower 4110, Firepower 4112 and 36 more | 2024-10-25 | 6.3 Medium |
| A vulnerability in the backup configuration feature of Cisco UCS Manager Software and in the configuration export feature of Cisco FXOS Software could allow an unauthenticated attacker with access to a backup file to decrypt sensitive information stored in the full state and configuration backup files. This vulnerability is due to a weakness in the encryption method used for the backup function. An attacker could exploit this vulnerability by leveraging a static key used for the backup configuration feature. A successful exploit could allow the attacker to decrypt sensitive information that is stored in full state and configuration backup files, such as local user credentials, authentication server passwords, Simple Network Management Protocol (SNMP) community names, and other credentials. | ||||
| CVE-2019-1781 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2024-09-17 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | ||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2024-09-17 | 8.8 High |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | ||||
| CVE-2019-12675 | 1 Cisco | 17 Firepower 4110, Firepower 4110 Firmware, Firepower 4115 and 14 more | 2024-09-17 | 8.8 High |
| Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances. | ||||
| CVE-2020-3459 | 1 Cisco | 17 Firepower 4110, Firepower 4112, Firepower 4115 and 14 more | 2024-09-17 | 7.8 High |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | ||||
| CVE-2019-12696 | 1 Cisco | 23 Asa 5500-x, Firepower, Firepower 1010 and 20 more | 2024-09-17 | 7.5 High |
| Multiple vulnerabilities in the Cisco Firepower System Software Detection Engine could allow an unauthenticated, remote attacker to bypass configured Malware and File Policies for RTF and RAR file types. For more information about these vulnerabilities, see the Details section of this advisory. | ||||
| CVE-2020-3456 | 1 Cisco | 17 Firepower 4110, Firepower 4112, Firepower 4115 and 14 more | 2024-09-17 | 8.8 High |
| A vulnerability in the Cisco Firepower Chassis Manager (FCM) of Cisco FXOS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of an affected device. The vulnerability is due to insufficient CSRF protections for the FCM interface. An attacker could exploit this vulnerability by persuading a targeted user to click a malicious link. A successful exploit could allow the attacker to send arbitrary requests that could take unauthorized actions on behalf of the targeted user. | ||||
| CVE-2019-1782 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2024-09-17 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | ||||