Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift Secondary Scheduler
Subscriptions
Total
47 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-44487 | 32 Akka, Amazon, Apache and 29 more | 364 Http Server, Opensearch Data Prepper, Apisix and 361 more | 2025-04-12 | 7.5 High |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. | ||||
| CVE-2024-24785 | 1 Redhat | 17 Enterprise Linux, Kube Descheduler Operator, Logging and 14 more | 2025-03-14 | 5.4 Medium |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. | ||||
| CVE-2022-41725 | 2 Golang, Redhat | 19 Go, Ansible Automation Platform, Cert Manager and 16 more | 2025-03-07 | 7.5 High |
| A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader. | ||||
| CVE-2022-41724 | 2 Golang, Redhat | 20 Go, Ansible Automation Platform, Cert Manager and 17 more | 2025-03-07 | 7.5 High |
| Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert). | ||||
| CVE-2024-24786 | 2 Golang, Redhat | 23 Go, Acm, Cluster Observability Operator and 20 more | 2025-02-13 | 7.5 High |
| The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown option is set. | ||||
| CVE-2024-24784 | 2 Go Standard Library, Redhat | 13 Net\/mail, Advanced Cluster Security, Enterprise Linux and 10 more | 2025-02-13 | 7.5 High |
| The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers. | ||||
| CVE-2024-24783 | 1 Redhat | 22 Advanced Cluster Security, Ansible Automation Platform, Cert Manager and 19 more | 2025-02-13 | 5.9 Medium |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. | ||||
| CVE-2023-45290 | 1 Redhat | 19 Advanced Cluster Security, Ansible Automation Platform, Cryostat and 16 more | 2025-02-13 | 6.5 Medium |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. | ||||
| CVE-2023-45288 | 3 Go Standard Library, Golang, Redhat | 32 Net\/http, Http2, Acm and 29 more | 2025-02-13 | 7.5 High |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. | ||||
| CVE-2023-45287 | 2 Golang, Redhat | 11 Go, Enterprise Linux, Migration Toolkit Applications and 8 more | 2025-02-13 | 7.5 High |
| Before Go 1.20, the RSA based TLS key exchanges used the math/big library, which is not constant time. RSA blinding was applied to prevent timing attacks, but analysis shows this may not have been fully effective. In particular it appears as if the removal of PKCS#1 padding may leak timing information, which in turn could be used to recover session key bits. In Go 1.20, the crypto/tls library switched to a fully constant time RSA implementation, which we do not believe exhibits any timing side channels. | ||||
| CVE-2023-39326 | 2 Golang, Redhat | 20 Go, Ansible Automation Platform, Cryostat and 17 more | 2025-02-13 | 5.3 Medium |
| A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response body to read many more bytes from the network than are in the body. A malicious HTTP client can further exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a handler fails to read the entire body of a request. Chunk extensions are a little-used HTTP feature which permit including additional metadata in a request or response body sent using the chunked encoding. The net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real body to encoded bytes grows too small. | ||||
| CVE-2023-39325 | 4 Fedoraproject, Golang, Netapp and 1 more | 53 Fedora, Go, Http2 and 50 more | 2025-02-13 | 7.5 High |
| A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function. | ||||
| CVE-2023-39322 | 3 Go Standard Library, Golang, Redhat | 18 Crypto Tls, Go, Acm and 15 more | 2025-02-13 | 7.5 High |
| QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size. | ||||
| CVE-2023-39321 | 2 Golang, Redhat | 17 Go, Acm, Ansible Automation Platform and 14 more | 2025-02-13 | 7.5 High |
| Processing an incomplete post-handshake message for a QUIC connection can cause a panic. | ||||
| CVE-2023-39319 | 2 Golang, Redhat | 15 Go, Acm, Enterprise Linux and 12 more | 2025-02-13 | 6.1 Medium |
| The html/template package does not apply the proper rules for handling occurrences of "<script", "<!--", and "</script" within JS literals in <script> contexts. This may cause the template parser to improperly consider script contexts to be terminated early, causing actions to be improperly escaped. This could be leveraged to perform an XSS attack. | ||||
| CVE-2023-39318 | 2 Golang, Redhat | 15 Go, Acm, Enterprise Linux and 12 more | 2025-02-13 | 6.1 Medium |
| The html/template package does not properly handle HTML-like "" comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may cause the template parser to improperly interpret the contents of <script> contexts, causing actions to be improperly escaped. This may be leveraged to perform an XSS attack. | ||||
| CVE-2023-29409 | 2 Golang, Redhat | 20 Go, Ansible Automation Platform, Cert Manager and 17 more | 2025-02-13 | 5.3 Medium |
| Extremely large RSA keys in certificate chains can cause a client/server to expend significant CPU time verifying signatures. With fix, the size of RSA keys transmitted during handshakes is restricted to <= 8192 bits. Based on a survey of publicly trusted RSA keys, there are currently only three certificates in circulation with keys larger than this, and all three appear to be test certificates that are not actively deployed. It is possible there are larger keys in use in private PKIs, but we target the web PKI, so causing breakage here in the interests of increasing the default safety of users of crypto/tls seems reasonable. | ||||
| CVE-2023-29406 | 2 Golang, Redhat | 19 Go, Advanced Cluster Security, Cryostat and 16 more | 2025-02-13 | 6.5 Medium |
| The HTTP/1 client does not fully validate the contents of the Host header. A maliciously crafted Host header can inject additional headers or entire requests. With fix, the HTTP/1 client now refuses to send requests containing an invalid Request.Host or Request.URL.Host value. | ||||
| CVE-2023-24538 | 2 Golang, Redhat | 21 Go, Advanced Cluster Security, Ansible Automation Platform and 18 more | 2025-02-13 | 9.8 Critical |
| Templates do not properly consider backticks (`) as Javascript string delimiters, and do not escape them as expected. Backticks are used, since ES6, for JS template literals. If a template contains a Go template action within a Javascript template literal, the contents of the action can be used to terminate the literal, injecting arbitrary Javascript code into the Go template. As ES6 template literals are rather complex, and themselves can do string interpolation, the decision was made to simply disallow Go template actions from being used inside of them (e.g. "var a = {{.}}"), since there is no obviously safe way to allow this behavior. This takes the same approach as github.com/google/safehtml. With fix, Template.Parse returns an Error when it encounters templates like this, with an ErrorCode of value 12. This ErrorCode is currently unexported, but will be exported in the release of Go 1.21. Users who rely on the previous behavior can re-enable it using the GODEBUG flag jstmpllitinterp=1, with the caveat that backticks will now be escaped. This should be used with caution. | ||||
| CVE-2023-24537 | 2 Golang, Redhat | 21 Go, Advanced Cluster Security, Ansible Automation Platform and 18 more | 2025-02-13 | 7.5 High |
| Calling any of the Parse functions on Go source code which contains //line directives with very large line numbers can cause an infinite loop due to integer overflow. | ||||