| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized. |
| An elevation of privilege vulnerability exists when the Windows Background Intelligent Transfer Service (BITS) IIS module improperly handles uploaded content. An attacker who successfully exploited this vulnerability could upload restricted file types to an IIS-hosted folder.
To exploit this vulnerability, an attacker would require permissions to upload files via BITS. An attacker could then submit a specially crafted request to upload a file.
The security update addresses the vulnerability by correcting how Windows BITS validates file names. |
| A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.
Exploitation of this vulnerability requires that a user uploads a specially crafted SharePoint application package to an affected version of SharePoint.
The security update addresses the vulnerability by correcting how SharePoint checks the source markup of application packages. |
| A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.
Exploitation of this vulnerability requires that a user uploads a specially crafted SharePoint application package to an affected version of SharePoint.
The security update addresses the vulnerability by correcting how SharePoint checks the source markup of application packages. |
| A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package. An attacker who successfully exploited the vulnerability could run arbitrary code in the context of the SharePoint application pool and the SharePoint server farm account.
Exploitation of this vulnerability requires that a user uploads a specially crafted SharePoint application package to an affected version of SharePoint.
The security update addresses the vulnerability by correcting how SharePoint checks the source markup of application packages. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix Rx queue stall on alloc failure
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet. |
| A vulnerability, which was classified as problematic, has been found in SourceCodester Best POS Management System 1.0. This issue affects the function save_settings of the file index.php?page=site_settings of the component Image Handler. The manipulation of the argument img with the input ../../shell.php leads to unrestricted upload. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-221591. |
| Firefox did not properly handle downloads of files ending in <code>.desktop</code>, which can be interpreted to run attacker-controlled commands. <br>*This bug only affects Firefox for Linux on certain Distributions. Other operating systems are unaffected, and Mozilla is unable to enumerate all affected Linux Distributions.*. This vulnerability affects Firefox < 112, Focus for Android < 112, Firefox ESR < 102.10, Firefox for Android < 112, and Thunderbird < 102.10. |
| Joomla Extension - phoca.cz - Authenticated file upload in Phoca Downloads component < 6.1.3 - The Joomla extension Phoca Downloads is vulnerable to an authenticated arbitrary file upload that allows registered users uploading executable files and leads to full RCE. |
| Joomla Extension - cmsjunkie.com - Arbitrary file upload / deletion (path traversal) in J-BusinessDirectory < 6.2.3 - Upload/remove accepted a client-controlled root (_path_type could point at the component site/admin trees), did not enforce path containment, and used a weak extension check. CSRF token was also missing on upload/remove. |
| Joomla Extension - yootheme.com - Unauthenticated arbitrary file upload in Zoo < 4.1.64 - The image element accepts arbitrary files when the client-supplied Content-Type falls within the image MIME group. |
| fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later. |
| fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks. |
| The "stringprep" module didn't process characters from RFC 3454 tables
B.2 or B.3 correctly: the latest Unicode codepoint attributes were used
instead of the specified Unicode 3.2.0. This behavior would cause
mismatches when processing domain names using IDNA 2003 (the "idna"
codec) and the in_table_b2() function of the "stringprep" module. This
only affects domain names containing characters that were not previously
registered or had their Unicode attributes such as case-folding
behavior updated since Unicode 3.2.0. |
| File Upload vulnerability in RainyGao-Hithub DocSys v.2.02.80 allows a remote attacker to execute arbitrary code |
| Contributor Arbitrary File Upload in Templatiq <= 0.2.5 versions. |
| The ProSolution WP Client plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.0.10 via the proSol_handleFileUpload function. This is due to missing validation of the attacker-controlled Content-Disposition header filename, which overrides the allow-listed multipart filename before the file is saved, and a post-save extension check that fails to delete the already-written file. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. The nonce required to reach the upload handler is publicly exposed via wp_localize_script on any front-end page rendering the job portal shortcode, allowing unauthenticated visitors to obtain a valid nonce and bypass that gating check entirely. |
| The Query Wrangler plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.5.57 via the 'options' parameter parameter. This is due to missing capability check and nonce verification on the wp_ajax_qw_form_ajax handler, combined with unsanitized attacker-controlled options fully replacing saved query options and being passed directly to call_user_func_array() guarded only by function_exists(). This makes it possible for authenticated attackers, with subscriber-level access and above, to execute code on the server. Exploitation requires only that at least one query row exists in the database, as the query_id is a small enumerable integer with no further access control. |
| Joomla! Core - [20260810] - Unrestricted uploads of SHTML files in Joomla 1.0.0-5.4.7, 6.0.0-6.1.2 - The default list of dangerous files did not include SHTML files. On servers that executed these files, that could lead to code execution. |
| authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, an inbound SAML Source configured with the non-default USERNAME_LINK or EMAIL_LINK user-matching mode interprets an XML comment in a NameID differently from the identity provider's signed assertion. An attacker with an account on the source identity provider who can set the account's NameID can inject an XML comment that truncates the value used by authentik to the text before the comment while the signed assertion remains valid. A crafted NameID can therefore truncate to a victim's username or email and bind the attacker's external identity to the victim's existing account. This grants full takeover without the victim's password or the identity provider's private key, and the malicious link persists so later logins succeed without the comment. Sources using the default unique-identifier matching mode and authentik's outbound SAML Provider role are not affected. This issue is fixed in versions 2026.2.6 and 2026.5.5. |
