CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
The BFD daemon in Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R8, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D85, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D10 allows remote attackers to cause a denial of service (bfdd crash and restart) or execute arbitrary code via a crafted BFD packet. |
Juniper Junos OS before 13.3R9, 14.1R6 before 14.1R6-S1, and 14.1 before 14.1R7, when configured with VPLS routing-instances, allows remote attackers to obtain sensitive mbuf information by injecting a flood of Ethernet frames with IPv6 MAC addresses directly into a connected interface. |
The Juniper SRX Series devices with Junos 11.4 before 11.4R12-S4, 12.1X44 before 12.1X44-D40, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D25, and 12.1X47 before 12.1X47-D10, when an Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (flowd crash) via a crafted packet. |
The rpd daemon in Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D45, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D40, 13.3 before 13.3R6, 14.1 before 14.1R4, and 14.2 before 14.2R2, when configured with BGP-based L2VPN or VPLS, allows remote attackers to cause a denial of service (daemon restart) via a crafted L2VPN family BGP update. |
The Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 8.0 before 8.0r1, 7.4 before 7.4r5, and 7.1 before 7.1r18 allows remote attackers to conduct clickjacking attacks via unspecified vectors. |
The Juniper MX Series routers with Junos 13.3R3 through 13.3Rx before 13.3R6, 14.1 before 14.1R4, 14.1X50 before 14.1X50-D70, and 14.2 before 14.2R2, when configured as a broadband edge (BBE) router, allows remote attackers to cause a denial of service (jpppd crash and restart) by sending a crafted PAP Authenticate-Request after the PPPoE Discovery and LCP phase are complete. |
Cross-site scripting (XSS) vulnerability in SRX Web Authentication (webauth) in Juniper Junos 11.4 before 11.4R11, 12.1X44 before 12.1X44-D34, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
The encryption implementation in Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 makes it easier for remote attackers to discover the plaintext content of VPN sessions by sniffing the network for ciphertext data and conducting an unspecified decryption attack. |
Cross-site scripting (XSS) vulnerability in the web server in the Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 8.0 before 8.0r6, 7.4 before 7.4r13, and 7.1 before 7.1r20 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
Unspecified vulnerability in Oracle MySQL Server 5.5.38 and earlier, and 5.6.19 and earlier, allows remote attackers to affect integrity via vectors related to SERVER:SSL:yaSSL. |
Juniper WLC devices with WLAN Software releases 8.0.x before 8.0.4, 9.0.x before 9.0.2.11, 9.0.3.x before 9.0.3.5, and 9.1.x before 9.1.1, when "Proxy ARP" or "No Broadcast" features are enabled in a clustered setup, allows remote attackers to cause a denial of service (device disconnect) via unspecified vectors. |
Pulse Connect Secure (aka PCS and formerly Juniper PCS) PSC6000, PCS6500, and MAG PSC360 8.1 before 8.1r5, 8.0 before 8.0r13, 7.4 before 7.4r13.5, and 7.1 before 7.1r22.2 and PPS 5.1 before 5.1R5 and 5.0 before 5.0R13, when Hardware Acceleration is enabled, does not properly validate the Finished TLS handshake message, which makes it easier for remote attackers to conduct man-in-the-middle attacks via a crafted Finished message. |
Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D15, 12.3 before 12.3R9, 13.1 before 13.1R4-S3, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 does not properly handle double quotes in authorization attributes in the TACACS+ configuration, which allows local users to bypass the security policy and execute commands via unspecified vectors. |
Unspecified vulnerability in Juniper Junos Space before 13.3R1.8, when the firewall in disabled, allows remote attackers to execute arbitrary commands via unspecified vectors. |
Unspecified vulnerability in the NSM XDB service in Juniper NSM before 2012.2R8 allows remote attackers to execute arbitrary code via unspecified vectors. |
Cross-site scripting (XSS) vulnerability in the SSL VPN/UAC web server in the Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 7.1 before 7.1r16, 7.4 before 7.4r3, and 8.0 before 8.0r1 and the Juniper Junos Pulse Access Control Service devices with UAC OS 4.1 before 4.1r8, 4.4 before 4.4r3 and 5.0 before 5.0r1 allows remote administrators to inject arbitrary web script or HTML via unspecified vectors. |
Juniper Junos OS before 12.1X44-D60, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 13.2 before 13.2R9, 13.2X51 before 13.2X51-D39, 13.3 before 13.3R8, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R4-S1, 15.1 before 15.1R2, 15.1X49 before 15.1X49-D30, and 16.1 before 16.1R1 allow remote attackers to cause a denial of service (socket consumption) via crafted TCP timestamps. |
Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R10, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8, 12.3 before 12.3R7, 13.1 before 13.1R4, 13.2 before 13.2R4, 13.3 before 13.3R2, and 14.1 before 14.1R1, when Auto-RP is enabled, allows remote attackers to cause a denial of service (RDP routing process crash and restart) via a malformed PIM packet. |
Juniper Junos OS 9.1 through 11.4 before 11.4R11, 12.1 before R10, 12.1X44 before D40, 12.1X46 before D30, 12.1X47 before D11 and 12.147-D15, 12.1X48 before D41 and D62, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4-S2, 13.1X49 before D49, 13.1X50 before 30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D25, 13.2X52 before D15, 13.3 before R2, and 14.1 before R1, when supporting 4-byte AS numbers and a BGP peer does not, allows remote attackers to cause a denial of service (memory corruption and RDP routing process crash and restart) via crafted transitive attributes in a BGP UPDATE. |
Cross-site scripting (XSS) vulnerability in the Pulse Collaboration (Secure Meeting) user pages in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r18, 7.3 before 7.3r10, 7.4 before 7.4r8, and 8.0 before 8.0r1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |