| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320. |
| A vulnerability in the Virtual Network Function Manager's (VNFM) logging function of Cisco Ultra Services Platform could allow an authenticated, local attacker to view sensitive data (cleartext credentials) on an affected system. More Information: CSCvd29355. Known Affected Releases: 21.0.v0.65839. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| A vulnerability in the Multipurpose Internet Mail Extensions (MIME) scanner of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device. The vulnerability is due to improper error handling of a malformed MIME header in an email attachment. An attacker could exploit this vulnerability by sending an email with a crafted MIME attachment. For example, a successful exploit could allow the attacker to bypass configured user filters to drop the email. The malformed MIME headers may not be RFC compliant. However, some mail clients could still allow users to access the attachment, which may not have been properly filtered by the device. Cisco Bug IDs: CSCvf44666. |
| A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655. |
| Cisco Cloud Web Security before 3.0.1.7 allows remote attackers to bypass intended filtering protection mechanisms by leveraging improper handling of HTTP methods, aka Bug ID CSCut69743. |
| A vulnerability in Cisco NX-OS System Software patch installation could allow an authenticated, local attacker to write a file to arbitrary locations. The vulnerability is due to insufficient restrictions in the patch installation process. An attacker could exploit this vulnerability by installing a crafted patch image on an affected device. The vulnerable operation occurs prior to patch activation. An exploit could allow the attacker to write arbitrary files on an affected system as root. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16513, CSCvf23794, CSCvf23832. |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is no access control for info.html, wancfg.cmd, rtroutecfg.cmd, arpview.cmd, cpuview.cmd, memoryview.cmd, statswan.cmd, statsatm.cmd, scsrvcntr.cmd, scacccntr.cmd, logview.cmd, voicesipview.cmd, usbview.cmd, wlmacflt.cmd, wlwds.cmd, wlstationlist.cmd, HPNAShow.cmd, HPNAView.cmd, qoscls.cmd, qosqueue.cmd, portmap.cmd, scmacflt.cmd, scinflt.cmd, scoutflt.cmd, certlocal.cmd, or certca.cmd. |
| A vulnerability in the Traversal Using Relay NAT (TURN) server included with Cisco Meeting Server (CMS) could allow an authenticated, remote attacker to gain unauthenticated or unauthorized access to components of or sensitive information in an affected system. The vulnerability is due to an incorrect default configuration of the TURN server, which could expose internal interfaces and ports on the external interface of an affected system. An attacker could exploit this vulnerability by using a TURN server to perform an unauthorized connection to a Call Bridge, a Web Bridge, or a database cluster in an affected system, depending on the deployment model and CMS services in use. A successful exploit could allow the attacker to gain unauthenticated access to a Call Bridge or database cluster in an affected system or gain unauthorized access to sensitive meeting information in an affected system. To exploit this vulnerability, the attacker must have valid credentials for the TURN server of the affected system. This vulnerability affects Cisco Meeting Server (CMS) deployments that are running a CMS Software release prior to Release 2.0.16, 2.1.11, or 2.2.6. Cisco Bug IDs: CSCvf51127. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device, aka HREF XSS. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. The vulnerability exists in the Cisco Adaptive Security Appliance (ASA) Software when the WEBVPN feature is enabled. Cisco Bug IDs: CSCve91068. |
| A vulnerability in the web-based user interface of Cisco Prime Infrastructure (PI) and Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker read and write access to information stored in the affected system as well as perform remote code execution. The attacker must have valid user credentials. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries which could allow the attacker to read and write files and execute remote code within the application, aka XML Injection. Cisco Prime Infrastructure software releases 1.1 through 3.1.6 are vulnerable. Cisco EPNM software releases 1.2, 2.0, and 2.1 are vulnerable. Cisco Bug IDs: CSCvc23894 CSCvc49561. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) and DPC3941T (firmware version DPC3941_2.5s3_PROD_sey) devices allows remote attackers to discover a WAN IPv6 IP address by leveraging knowledge of the CM MAC address. |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software image. The vulnerability is due to insufficient NX-OS signature verification for software images. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software image on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf25045, CSCvf31495. |
| The Comcast firmware on Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST) devices allows configuration changes via CSRF. |
| Multiple Cisco embedded devices use hardcoded X.509 certificates and SSH host keys embedded in the firmware, which allows remote attackers to defeat cryptographic protection mechanisms and conduct man-in-the-middle attacks by leveraging knowledge of these certificates and keys from another installation, aka Bug IDs CSCuw46610, CSCuw46620, CSCuw46637, CSCuw46654, CSCuw46665, CSCuw46672, CSCuw46677, CSCuw46682, CSCuw46705, CSCuw46716, CSCuw46979, CSCuw47005, CSCuw47028, CSCuw47040, CSCuw47048, CSCuw47061, CSCuw90860, CSCuw90869, CSCuw90875, CSCuw90881, CSCuw90899, and CSCuw90913. |
| A vulnerability in the Elastic Services Controller (ESC) web interface of the Cisco Ultra Services Platform could allow an authenticated, remote attacker to acquire sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. An exploit could allow the attacker to view information regarding the Ultra Services Platform deployment. Cisco Bug IDs: CSCvd76406. Known Affected Releases: 21.0.v0.65839. |
