| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, and Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99925, CSCvf15164, CSCvf15167, CSCvf15170, CSCvf15173. |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717. |
| An Access-Control Filtering Mechanisms Bypass vulnerability in certain access-control filtering mechanisms on Cisco Nexus 7000 Series Switches could allow an unauthenticated, remote attacker to bypass defined traffic configured within an access control list (ACL) on the affected system. More Information: CSCtz59354. Known Affected Releases: 5.2(4) 6.1(3)S5 6.1(3)S6 6.2(1.121)S0 7.2(1)D1(1) 7.3(0)ZN(0.161) 7.3(1)N1(0.1). Known Fixed Releases: 7.3(0)D1(1) 6.2(2) 6.1(5) 8.3(0)KMT(0.24) 8.3(0)CV(0.337) 7.3(1)N1(1) 7.3(0)ZN(0.210) 7.3(0)ZN(0.177) 7.3(0)ZD(0.194) 7.3(0)TSH(0.99) 7.3(0)SC(0.14) 7.3(0)RSP(0.7) 7.3(0)N1(1) 7.3(0)N1(0.193) 7.3(0)IZN(0.13) 7.3(0)IB(0.102) 7.3(0)GLF(0.44) 7.3(0)D1(0.178) 7.1(0)D1(0.14) 7.0(3)ITI2(1.6) 7.0(3)ISH1(2.13) 7.0(3)IFD6(0.78) 7.0(3)IFD6(0) 7.0(3)IDE6(0.12) 7.0(3)IDE6(0) 7.0(3)I2(1) 7.0(3)I2(0.315) 7.0(1)ZD(0.3) 7.0(0)ZD(0.84) 6.2(1.149)S0 6.2(0.285) 6.1(5.32)S0 6.1(4.97)S0 6.1(2.30)S0. |
| A vulnerability in certain filtering mechanisms of access control lists (ACLs) for Cisco ASR 5000 Series Aggregation Services Routers through 21.x could allow an unauthenticated, remote attacker to bypass ACL rules that have been configured for an affected device. More Information: CSCvb99022 CSCvc16964 CSCvc37351 CSCvc54843 CSCvc63444 CSCvc77815 CSCvc88658 CSCve08955 CSCve14141 CSCve33870. |
| A vulnerability in the web framework code for the SQL database interface of the Cisco Prime Collaboration Provisioning application could allow an authenticated, remote attacker to impact the confidentiality and integrity of the application by executing arbitrary SQL queries, aka SQL Injection. The attacker could read or write information from the SQL database. The vulnerability is due to a lack of proper validation on user-supplied input within SQL queries. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious SQL statements to the affected application. An exploit could allow the attacker to determine the presence of certain values and write malicious input in the SQL database. The attacker would need to have valid user credentials. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.3. Cisco Bug IDs: CSCvf47935. |
| A vulnerability in exporting functions of the user interface for Cisco Prime Collaboration Assurance could allow an authenticated, remote attacker to view file directory listings and download files. Affected Products: Cisco Prime Collaboration Assurance software versions 11.0, 11.1, and 11.5 are vulnerable. Cisco Prime Collaboration Assurance software versions prior to 11.0 are not vulnerable. More Information: CSCvc86238. Known Affected Releases: 11.5(0). |
| A vulnerability in the Multipurpose Internet Mail Extensions (MIME) scanner of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device. The vulnerability is due to improper error handling of a malformed MIME header in an email attachment. An attacker could exploit this vulnerability by sending an email with a crafted MIME attachment. For example, a successful exploit could allow the attacker to bypass configured user filters to drop the email. The malformed MIME headers may not be RFC compliant. However, some mail clients could still allow users to access the attachment, which may not have been properly filtered by the device. Cisco Bug IDs: CSCvf44666. |
| A vulnerability in the AutoIT service of Cisco Ultra Services Framework Staging Server could allow an unauthenticated, remote attacker to execute arbitrary shell commands as the Linux root user. The vulnerability is due to improper shell invocations. An attacker could exploit this vulnerability by crafting CLI command inputs to execute Linux shell commands as the root user. This vulnerability affects all releases of Cisco Ultra Services Framework Staging Server prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76673. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is no access control for info.html, wancfg.cmd, rtroutecfg.cmd, arpview.cmd, cpuview.cmd, memoryview.cmd, statswan.cmd, statsatm.cmd, scsrvcntr.cmd, scacccntr.cmd, logview.cmd, voicesipview.cmd, usbview.cmd, wlmacflt.cmd, wlwds.cmd, wlstationlist.cmd, HPNAShow.cmd, HPNAView.cmd, qoscls.cmd, qosqueue.cmd, portmap.cmd, scmacflt.cmd, scinflt.cmd, scoutflt.cmd, certlocal.cmd, or certca.cmd. |
| A vulnerability in the Access Network Query Protocol (ANQP) ingress frame processing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, Layer 2 RF-adjacent attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of ANQP query frames by the affected device. An attacker could exploit this vulnerability by sending a malformed ANQP query frame to an affected device that is on an RF-adjacent network. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. This vulnerability affects Cisco Wireless LAN Controllers that are running a vulnerable release of Cisco WLC Software and are configured to support Hotspot 2.0. Cisco Bug IDs: CSCve05779. |
| A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd. |
| A vulnerability in the web interface of Cisco Jabber could allow an authenticated, local attacker to retrieve user profile information from the affected software, which could lead to the disclosure of confidential information. The vulnerability is due to a lack of input and validation checks in the affected software. An attacker could exploit this vulnerability by authenticating locally to an affected system and then issuing specific commands to the affected software. A successful exploit could allow the attacker to view all profile information for a user instead of only certain Jabber parameters that should be visible. This vulnerability affects all releases of Cisco Jabber prior to Release 1.9.31. Cisco Bug IDs: CSCve52418. |
| A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365. |
| A vulnerability in the ImageID parameter of Cisco Unity Connection 10.5(2) could allow an unauthenticated, remote attacker to access files in arbitrary locations on the filesystem of an affected device. The issue is due to improper sanitization of user-supplied input in HTTP POST parameters that describe filenames. An attacker could exploit this vulnerability by using directory traversal techniques to submit a path to a desired file location. Cisco Bug IDs: CSCvd90118. |
| A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software image. The vulnerability is due to insufficient NX-OS signature verification for software images. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software image on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf25045, CSCvf31495. |
| A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785. |
| A vulnerability in the upgrade process of Cisco Spark Board could allow an authenticated, local attacker to install an unverified upgrade package, aka Signature Verification Bypass. The vulnerability is due to insufficient upgrade package validation. An attacker could exploit this vulnerability by providing the upgrade process with an upgrade package that the attacker controls. An exploit could allow the attacker to install custom firmware to the Spark Board. Cisco Bug IDs: CSCvf84502. |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gaining unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99902, CSCvf14879. |
