| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| authentik is an open-source identity provider. When using the client_credentials or device_code OAuth grants, it was possible for an attacker to get a token from authentik with scopes that haven't been configured in authentik. authentik 2024.8.5 and 2024.10.3 fix this issue. |
| A vulnerability was detected in itsourcecode Online Tour and Travel Management System 1.0. This vulnerability affects unknown code of the file /admin/operations/travellers.php. The manipulation of the argument photo results in unrestricted upload. The attack can be launched remotely. The exploit is now public and may be used. |
| authentik is an open-source identity provider. After authorizing access to a RAC endpoint, authentik creates a token which is used for a single connection and is sent to the client in the URL. This token is intended to only be valid for the session of the user who authorized the connection, however this check is missing in versions prior to 2025.6.3 and 2025.4.3. When, for example, using RAC during a screenshare, a malicious user could access the same session by copying the URL from the shown browser. authentik 2025.4.3 and 2025.6.3 fix this issue. As a workaround, it is recommended to decrease the duration a token is valid for (in the RAC Provider settings, set Connection expiry to `minutes=5` for example). The maintainers of authentik also recommend enabling the option Delete authorization on disconnect. |
| A vulnerability, which was classified as critical, was found in taisan tarzan-cms 1.0.0. This affects the function UploadResponse of the file src/main/java/com/tarzan/cms/modules/admin/controller/common/UploadController.java of the component Article Management. The manipulation of the argument file leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| authentik is an open-source Identity Provider that emphasizes flexibility and versatility. Authentik API-Access-Token mechanism can be exploited to gain admin user privileges. A successful exploit of the issue will result in a user gaining full admin access to the Authentik application, including resetting user passwords and more. This issue has been patched in version(s) 2024.2.4, 2024.4.2 and 2024.6.0.
|
| authentik is an open-source Identity Provider. Access restrictions assigned to an application were not checked when using the OAuth2 Device code flow. This could potentially allow users without the correct authorization to get OAuth tokens for an application and access it. This issue has been patched in version(s) 2024.6.0, 2024.2.4 and 2024.4.3. |
| A vulnerability was found in Ruijie RG-NBS2009G-P up to 20240305. It has been classified as critical. Affected is an unknown function of the file /system/passwdManage.htm of the component Password Handler. The manipulation leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257280. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been identified in TIA Administrator (All versions < V3.0.6). The affected application allows low-privileged users to trigger installations by overwriting cache files and modifying the downloads path. This would allow an attacker to escalate privilege and exceute arbitrary code. |
| In JetBrains TeamCity before 2025.07.1 privilege escalation was possible due to incorrect directory ownership |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in magepeopleteam Taxi Booking Manager for WooCommerce allows Authentication Abuse. This issue affects Taxi Booking Manager for WooCommerce: from n/a through 1.3.0. |
| Liferay Portal 7.3.0 through 7.4.3.132, and Liferay DXP 2025.Q1 through 2025.Q1.6, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15, 7.4 GA through update 92 and 7.3 GA through update 36 allows unauthenticated users with valid credentials to bypass the login process by changing the POST method to GET, once the site has MFA enabled. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. A vulnerability present in versions 0.9.10 through 0.9.16 allows a user to authenticate to a Linux host via Himmelblau using an *invalid* Linux Hello PIN, provided the host is offline. While the user gains access to the local system, Single Sign-On (SSO) fails due to the network being down and the inability to issue tokens (due to a failure to unlock the Hello key). The core issue lies in an incorrect assumption within the `acquire_token_by_hello_for_business_key` function: it was expected to return a `TPMFail` error for an invalid Hello key when offline, but instead, a preceding nonce request resulted in a `RequestFailed` error, leading the system to erroneously transition to an offline success state without validating the Hello key unlock. This impacts systems using Himmelblau for authentication when operating in an offline state with Hello PIN authentication enabled. Rocky Linux 8 (and variants) are not affected by this vulnerability. The problem is resolved in Himmelblau version 0.9.17. A workaround is available for users who cannot immediately upgrade. Disabling Hello PIN authentication by setting `enable_hello = false` in `/etc/himmelblau/himmelblau.conf` will mitigate the vulnerability. |
| snowflake-connector-nodejs is a NodeJS driver for Snowflake. Snowflake discovered and remediated a vulnerability in the Snowflake NodeJS Driver. File permissions checks of the temporary credential cache could be bypassed by an attacker with write access to the local cache directory. This vulnerability affects versions 1.12.0 through 2.0.1 on Linux. Snowflake fixed the issue in version 2.0.2. |
| Intelbras RX1500 Router v2.2.17 and before is vulnerable to Incorrect Access Control in the FirmwareUpload function and GetFirmwareValidation function. |
| Matrix Media Repo (MMR) is a highly configurable multi-homeserver media repository for Matrix. MMR before version 1.3.5 allows, by design, unauthenticated remote participants to trigger a download and caching of remote media from a remote homeserver to the local media repository. Such content then also becomes available for download from the local homeserver in an unauthenticated way. The implication is that unauthenticated remote adversaries can use this functionality to plant problematic content into the media repository. MMR 1.3.5 introduces a partial mitigation in the form of new endpoints which require authentication for media downloads. The unauthenticated endpoints will be frozen in a future release, closing the attack vector. Though extremely limited, server operators can use more strict rate limits based on IP address as a partial workaround. |
| An issue in the default configuration of the password reset function in LogicData eCommerce Framework v5.0.9.7000 allows attackers to bypass authentication and compromise user accounts via a bruteforce attack. |
| vaultwarden is an unofficial Bitwarden compatible server written in Rust, formerly known as bitwarden_rs. Attacker can obtain owner rights of other organization. Hacker should know the ID of victim organization (in real case the user can be a part of the organization as an unprivileged user) and be the owner/admin of other organization (by default you can create your own organization) in order to attack. This vulnerability is fixed in 1.33.0. |
| A vulnerability was identified in code-projects Hostel Management System 1.0. This affects an unknown part of the file hostel_manage.exe of the component Login. The manipulation leads to improper authentication. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. |
| Memory corruption may occur due top improper access control in HAB process. |
| vaultwarden is an unofficial Bitwarden compatible server written in Rust, formerly known as bitwarden_rs. In affected versions an attacker is capable of updating or deleting groups from an organization given a few conditions: 1. The attacker has a user account in the server. 2. The attacker's account has admin or owner permissions in an unrelated organization. 3. The attacker knows the target organization's UUID and the target group's UUID. Note that this vulnerability is related to group functionality and as such is only applicable for servers who have enabled the `ORG_GROUPS_ENABLED` setting, which is disabled by default. This attack can lead to different situations: 1. Denial of service, the attacker can limit users from accessing the organization's data by removing their membership from the group. 2. Privilege escalation, if the attacker is part of the victim organization, they can escalate their own privileges by joining a group they wouldn't normally have access to. For attackers that aren't part of the organization, this shouldn't lead to any possible plain-text data exfiltration as all the data is encrypted client side. This vulnerability is patched in Vaultwarden `1.32.7`, and users are recommended to update as soon as possible. If it's not possible to update to `1.32.7`, some possible workarounds are: 1. Disabling `ORG_GROUPS_ENABLED`, which would disable groups functionality on the server. 2. Disabling `SIGNUPS_ALLOWED`, which would not allow an attacker to create new accounts on the server. |
