| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS()
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free freeing trigger private data
Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing
event_trigger_data") moved the kfree() of event_trigger_data to a kthread
that runs tracepoint_synchronize_unregister() before freeing. That removed
the synchronization the trigger .free callbacks used to get implicitly and
inline from trigger_data_free().
event_hist_trigger_free(), event_hist_trigger_named_free() and
event_enable_trigger_free() free their satellite data (hist_data, cmd_ops,
enable_data) right after trigger_data_free() returns. With the
synchronization now deferred to the kthread, a concurrent tracepoint
handler can still reach that data through the list_del_rcu()'d trigger,
causing a use-after-free.
The histogram teardown must stay synchronous: remove_hist_vars() and
unregister_field_var_hists() have to detach a synthetic event from the
histogram before the trigger-removal write returns, otherwise a following
command races in and the synthetic-event removal fails with -EBUSY, as the
trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait
with the correct barrier - tracepoint_synchronize_unregister(), matching
the free kthread - before freeing.
The enable trigger has no such synchronous requirement, and a blocking
synchronize there would re-serialize the path that commit deliberately
deferred. Give it an optional private_data_free() callback that the free
kthread runs after its grace period, and free enable_data from there. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: avoid rereading IB param length
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix Rx queue stall on alloc failure
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free in x25_kill_by_neigh()
x25_kill_by_neigh() walks the global X.25 socket list looking for sockets
attached to a terminating neighbour. x25_list_lock protects list membership
while the lookup is in progress, but it does not pin a socket's lifetime
after the lock is dropped.
The function currently drops x25_list_lock before calling lock_sock(s). A
concurrent close can run x25_release(), remove the same socket from
x25_list, and drop the last socket reference in that window. The neighbour
teardown path can then lock or inspect a freed struct sock/struct x25_sock.
Take sock_hold(s) while x25_list_lock still proves that the list entry is
live, then drop the temporary reference after the socket has been locked,
rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(),
because another path may have disconnected the socket before this path
acquired the socket lock. Restart the list walk after each disconnect
because the list lock was dropped and the previous iterator state may no
longer be valid.
A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in
x25_kill_by_neigh(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe
Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call
v4l2_subdev_init_finalize() which allocates the subdev active state,
but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup()
calls v4l2_subdev_cleanup() to free it.
This causes a memory leak on every rmmod, reported by kmemleak:
unreferenced object 0xffff0000d06fc800 (size 192):
comm "(udev-worker)", pid 254, jiffies 4294913455
backtrace (crc 36eeae58):
kmemleak_alloc+0x34/0x40
__kvmalloc_node_noprof+0x5f8/0x7d8
__v4l2_subdev_state_alloc+0x1fc/0x30c
__v4l2_subdev_init_finalize+0x178/0x368
Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup()
in both crossbar and pipe cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cedrus: skip invalid H.264 reference list entries
Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the
stateless slice control and later uses their indices to look up
decode->dpb[] in _cedrus_write_ref_list().
Rejecting such controls in cedrus_try_ctrl() would break existing
userspace, since stateless H.264 reference lists may legitimately carry
out-of-range indices for missing references. Instead, guard the actual
DPB lookup in Cedrus and skip entries whose indices do not fit the fixed
V4L2_H264_NUM_DPB_ENTRIES array.
This keeps the fix local to the driver use site and avoids out-of-bounds
reads from malformed or unsupported reference list entries. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: detect_link_and_local_sink: DP alt mode timeout path leaks prev_sink reference
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
(cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: Avoid possible truncation with calculating visible size
Calculating the visible size of the system framebuffer can result in
truncation of the result. The calculation uses 32-bit arithmetics,
which can overflow if the values for height and stride are large. Fix
the issue by multiplying with mul_u32_u32(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Fix buffer overflow in steered register list allocation
The size calculation for the steered register extarray uses only the
geometry DSS mask (g_dss_mask) to determine the number of entries to
allocate:
total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num;
However, the filling loop uses for_each_dss_steering(), which iterates
over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask
(geometry + compute DSS). On platforms with compute-only DSS bits, the
loop writes past the allocated buffer, corrupting adjacent slab objects.
This manifests as list_del corruption and SLUB redzone overwrites during
drm_managed_release on device unbind, since the overflow corrupts the
drmres list_head of neighboring allocations.
Fix by computing the allocation size using the union of both DSS masks,
matching the iteration pattern of for_each_dss_steering().
--
v2:
- use bitmap_weighted_or() (Zhanjun)
(cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) |
| Logs contain replayable JWT tokens in Apache Ranger versions <= 2.8.0
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| Vulnerability in tapestry-core in Apache Tapestry 5.5.0+ on all platforms allows attackers to download clsspath assets via specially crafted URLs.
Users are recommended to upgrade to version 5.9.1, which fixes this issue. |
| An LDAP Injection vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to retrieve sensitive information from a connected LDAP authentication server through an exposed authentication or management web interface. This vulnerability may also allow a remote attacker to authenticate as an LDAP user with a partial identifier if they additionally have that user's valid passphrase. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Use sender devcom for MPV master-up
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet: pep: fix use-after-free in pep_get_sb()
pep_get_sb() doesn't consider that pskb_may_pull() might have relocated
the skb data, and continue to access the older pointer, causing UAF.
Reproduced under KASAN:
BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0
Read of size 1 at addr ff11000105510f50 by task repro/157
pep_get_sb+0x234/0x3b0
pipe_handler_do_rcv+0x5f7/0xa10
pep_do_rcv+0x203/0x410
__sk_receive_skb+0x471/0x4a0
phonet_rcv+0x5b3/0x6c0
__netif_receive_skb+0xcc/0x1d0
Refetch the header with skb_header_pointer() after pskb_may_pull(), so
the possibly stale pointer is no longer dereferenced. There are better
ways to solve this, but, this is the less instrusive one. |
