| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition in the JavaScript Engine component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, an unauthenticated P2P peer can cause the mempool download pipeline to retain transactions after verification reaches the outer RATE_LIMIT_DELAY timeout. In zebrad/src/components/mempool/downloads.rs, Downloads::poll_next removed cancel_handles entries after success and ordinary verification errors, but tokio::time::error::Elapsed did not carry the UnminedTxId needed to remove the timed-out entry. Each retained cancel_handles entry could hold a full Gossip::Tx(UnminedTx), while normal mined-transaction cleanup could not match attacker transactions and no periodic garbage collection or count cap existed. Sustained traffic therefore caused monotonic memory growth until swap pressure degraded the node or the operating system terminated the zebrad process for exhausting memory. This issue is fixed in version 4.5.0. |
| Cross-Site Request Forgery (CSRF) vulnerability in DevItems HashBar – WordPress Notification Bar allows Cross Site Request Forgery.
This issue affects HashBar – WordPress Notification Bar: from n/a through 2.0.0. |
| Site isolation issue in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Mitigation bypass in the Safe Browsing component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Internally found bugs present in Thunderbird 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154 and Thunderbird 154. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.20.0, contain an Improper Link Resolution Before File Access ('Link Following') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of Service and Elevation of Privileges. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.20.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Froxlor is open source server administration software. Prior to 2.3.8, the standalone lib/ajax.php entry point bypasses the centralized request validation in lib/init.php, and Ajax::handle in lib/Froxlor/Ajax/Ajax.php checks only for a valid session before routing state-changing requests. The editapikey action in Ajax::editApiKey updates allowed_from and valid_until without validating a CSRF token, while templates/Froxlor/assets/js/jquery/apikeys.js sends no token because the endpoint does not require one. An unauthenticated attacker can induce an authenticated administrator's browser to submit a forged request that adds an attacker-controlled address to an API key's allowed_from list or removes its expiration, weakening the key's security restrictions. This issue is fixed in version 2.3.8. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.2, the DEVICE_WEBAPI_REQUEST and DEVICE_PROPERTY Socket.IO handlers in server/runtime/index.js omit isSocketWriteAuthorized and accept attacker-controlled property.address or endpoint connection data. A remote unauthenticated attacker can make server/runtime/devices/httprequest/index.js call axios.get against arbitrary HTTP or HTTPS destinations, connect to reachable OPC UA or ODBC services, and receive results through the corresponding Socket.IO event. This read SSRF oracle can expose cloud instance metadata, internal administrative services, industrial endpoints, and ODBC data reachable from the FUXA host, including when secureEnabled is true. This issue is fixed in version 1.3.2. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.2, POST /api/scheduler and DELETE /api/scheduler in server/api/scheduler/index.js do not consistently enforce authJwt.haveAdminPermission for scheduler settings. An authenticated non-admin operator can create or alter deviceActions that invoke onSetValue or onRunScript, or delete schedules, gaining access to device-value changes and server-side project script execution normally reserved for administrators. Scheduled and repeating actions can continue changing PLC setpoints, safety interlocks, device state, or project data after the operator's session ends. This issue is fixed in version 1.3.2. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. In 1.3.2 and earlier, the device-webapi-request Socket.IO handler in server/runtime/index.js permits an authenticated non-admin runtime user to control property.address, causing the FUXA server to issue an outbound HTTP or HTTPS request and return the response body to the requesting socket. The attacker can use the server as a read SSRF oracle against reachable internal services or cloud metadata endpoints, with impact depending on the FUXA host's deployment network. This issue is fixed in version 1.3.3. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. In 1.3.2 and earlier, the allowDashboard authorization gate in server/integrations/node-red/index.js calls authJwt.verify for /nodered without inspecting the decoded identity. When nodeRedEnabled is true, secureEnabled is true, and nodeRedAuthMode is secure, a remote unauthenticated attacker can obtain a signed guest token from POST /api/heartbeat and use it to access the RED.httpAdmin editor and flow deployment API. Because the Node-RED configuration has no second adminAuth gate, the attacker can deploy function nodes or invoke fuxa.runScript and runtime.scriptsMgr.runScript, gaining control of FUXA project data, configuration, scripts, filesystem-capable runtime helpers, and potentially operating-system commands when nodeRedUnsafeModules is enabled. This issue is fixed in version 1.3.3. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. In 1.3.2 and earlier, POST /api/refresh in server/api/auth/index.js falls back from current user data to decoded.groups, including when the user is deleted or groups is zero, and POST /api/heartbeat in server/api/index.js re-signs inbound JWT claims without validating the current database record. An attacker who possesses a previously issued privileged refresh cookie or access token can continue minting privileged JWTs after account deletion, disablement, role removal, or demotion. Continued refresh-cookie rotation can extend the stale session and preserve unauthorized access to user management, project manipulation, runtime configuration, scripts, and backdoor-account creation. This issue is fixed in version 1.3.3. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.3, DELETE /api/roles removes role definitions through server/runtime/users/usrstorage.js but does not remove the deleted role identifier from each user's info.roles array or the runtime usersMap cache. If a permission configuration still references that identifier, an affected user can retain authorization rights that an administrator intended to revoke, causing residual privilege, inconsistent access-control state, and misleading audit results. This issue is fixed in version 1.3.3. |
| Froxlor is open source server administration software. From 2.3.7 until 2.3.8, the Customers.get, Customers.listing, Admins.get, Admins.listing, Ftps.get, and Ftps.listing API commands in lib/Froxlor/Api/Commands/Customers.php, lib/Froxlor/Api/Commands/Admins.php, and lib/Froxlor/Api/Commands/Ftps.php retrieve full database rows and return them without removing password and data_2fa fields. An authenticated API caller with permission to use these endpoints can obtain customer, administrator, and FTP password hashes as well as Base32-encoded TOTP seeds for administrator and customer accounts. Password hashes can be cracked offline, and TOTP seeds can generate valid second-factor codes until two-factor authentication is reset. Exposure of both values for an account can enable takeover of the hosting panel or hosted resources and can defeat both authentication factors. This issue is fixed in version 2.3.8. |
| Froxlor is open source server administration software. Prior to 2.3.8, DNS TXT record content accepted by lib/Froxlor/Api/Commands/DomainZones.php can contain HTML special characters, lib/Froxlor/UI/Callbacks/Text.php returns the content from Text::wordwrap without HTML escaping, and templates/Froxlor/table/table.html.twig renders the callback result with the raw filter. An authenticated customer with DNS editor access can store JavaScript-bearing content in a TXT record. When an administrator views the affected domain's DNS configuration, the payload executes automatically in the administrator's browser session, which can expose session data or perform privileged panel actions. This issue is fixed in version 2.3.8. |
| Froxlor is open source server administration software. Prior to 2.3.8, the Admins.add and Admins.update endpoints in lib/Froxlor/Api/Commands/Admins.php accept an attacker-controlled ipaddress array and store it as JSON in panel_admins.ip without enforcing numeric element types. When the poisoned account later calls IpsAndPorts.listing, lib/Froxlor/Api/Commands/IpsAndPorts.php decodes the array and concatenates its elements into a SQL IN clause without casting or parameterization; the same unsafe pattern is present in lib/Froxlor/Api/Commands/Domains.php. An authenticated administrator with change_serversettings permission can store a UNION-based payload and trigger it through the poisoned account to retrieve arbitrary database data, including administrator login names and bcrypt password hashes, with potential privilege escalation and broader database impact. This issue is fixed in version 2.3.8. |
| A flaw was found in the Keycloak Admin REST API, which is used to manage security realms and clients. The issue occurs when the system processes requests for rotated client secrets that are stored in a secure vault. Due to improper boundary enforcement, a delegated administrator with view-only permissions can retrieve the actual resolved secret instead of the vault placeholder, leading to the exposure of sensitive credentials. |
| A vulnerability was discovered in Keycloak's administrative interface that allows certain administrators to see information about groups they shouldn't have access to. When the new Fine-Grained Admin Permissions (FGAP v2) are turned on, an administrator who is allowed to see a specific "role" can also see a list of all groups assigned to that role. The system fails to check if the administrator has permission to see those specific groups. This could allow a restricted administrator to discover "hidden" groups and see their details, such as internal names and custom settings, which might contain sensitive deployment information. |
