| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Remote Control Server, maintained by Steppschuh, 3.1.1.12 allows unauthenticated remote code execution when authentication is disabled, which is the default configuration. The server exposes a custom UDP-based control protocol that accepts remote keyboard input events without verification. An attacker on the same network can issue a sequence of keystroke commands to launch a system shell and execute arbitrary commands, resulting in full system compromise. |
| DuraComm SPM-500 DP-10iN-100-MU
lacks access controls for a function that should require user authentication. This could allow an attacker to repeatedly reboot the device. |
| The embedded web server on the thermostat listed version ranges contain a vulnerability that allows unauthenticated attackers, either on the local area network or from the Internet via a router with port forwarding set up, to gain direct access to the thermostat's embedded web server and reset user credentials by manipulating specific elements of the embedded web interface. |
| A channel accessible by non-endpoint vulnerability [CWE-300] in Fortinet FortiOS version 7.4.0 through 7.4.3, 7.2.0 through 7.2.7 and before 7.0.14 & FortiProxy version 7.4.0 through 7.4.3, 7.2.0 through 7.2.9 and before 7.0.16 allows an unauthenticated attacker with the knowledge of device specific data to spoof the identity of a downstream device of the security fabric via crafted TCP requests. |
| A improper restriction of communication channel to intended endpoints vulnerability [CWE-923] in Fortinet FortiOS version 7.4.0 through 7.4.3, 7.2.0 through 7.2.7, 7.0.0 through 7.0.14, 6.4.0 through 6.4.15 and 6.2.0 through 6.2.16, Fortinet FortiProxy version 7.4.0 through 7.4.2, 7.2.0 through 7.2.9, 7.0.0 through 7.0.15 and 2.0.0 through 2.0.14, Fortinet FortiManager version 7.4.0 through 7.4.2, 7.2.0 through 7.2.4, 7.0.0 through 7.0.11, 6.4.0 through 6.4.14 and 6.2.0 through 6.2.13, Fortinet FortiAnalyzer version 7.4.0 through 7.4.2, 7.2.0 through 7.2.4, 7.0.0 through 7.0.11, 6.4.0 through 6.4.14 and 6.2.0 through 6.2.13, Fortinet FortiVoice version 7.0.0 through 7.0.2, 6.4.0 through 6.4.8 and 6.0.0 through 6.0.12 and Fortinet FortiWeb version 7.4.0 through 7.4.2, 7.2.0 through 7.2.10, 7.0.0 through 7.0.10 allows an unauthenticated attacker in a man-in-the-middle position to impersonate the management device (FortiCloud server or/and in certain conditions, FortiManager), via intercepting the FGFM authentication request between the management device and the managed device |
| Authentication Bypass
vulnerability in Hitachi Ops Center Analyzer on Linux, 64 bit (Hitachi Ops Center Analyzer detail view component), Hitachi Infrastructure Analytics Advisor on Linux, 64 bit (Hitachi Data Center Analytics
component
).This issue affects Hitachi Ops Center Analyzer: from 10.0.0-00 before 11.0.3-00; Hitachi Infrastructure Analytics Advisor: from 2.1.0-00 through 4.4.0-00. |
| Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle WebLogic Server accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| u-boot bug that allows for u-boot shell and interrupt over UART
|
| A vulnerability was found in Quay, which allows successful authentication even when a truncated password version is provided. This flaw affects the authentication mechanism, reducing the overall security of password enforcement. While the risk is relatively low due to the typical length of the passwords used (73 characters), this vulnerability can still be exploited to reduce the complexity of brute-force or password-guessing attacks. The truncation of passwords weakens the overall authentication process, thereby reducing the effectiveness of password policies and potentially increasing the risk of unauthorized access in the future. |
| There exists an unauthenticated accessible JTAG port on the Kioxia PM6, PM7 and CM6 devices - On the Kioxia CM6, PM6 and PM7 disk drives it was discovered that the 2 main CPU cores of the SoC can be accessed via an open JTAG debug port that is exposed on the drive’s circuit board. Due to the wide cutout of the enclosures, the JTAG port can be accessed without having to open the disk enclosure. Utilizing the JTAG debug port, an attacker with (temporary) physical access can get full access to the firmware and memory on the 2 main CPU cores within the drive including the execution of arbitrary code, the modification of firmware execution flow and data or bypassing the firmware signature verification during boot-up. |
| A vulnerability has been found in TOTOLINK T6 4.1.5cu.748_B20211015 and classified as critical. Affected by this vulnerability is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument telnet_enabled with the input 1 leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability in the Network Access Manager (NAM) module of Cisco Secure Client could allow an unauthenticated attacker with physical access to an affected device to elevate privileges to SYSTEM.
This vulnerability is due to a lack of authentication on a specific function. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges on an affected device. |
| A missing critical step in authentication vulnerability [CWE-304] in Fortinet FortiOS version 7.6.0 through 7.6.1, 7.4.0 through 7.4.5, 7.2.0 through 7.2.10, and before 7.0.16 & FortiProxy version 7.6.0 through 7.6.1, 7.4.0 through 7.4.8, 7.2.0 through 7.2.13 and before 7.0.20 allows an API-user using api-key + PKI user certificate authentication to login even if the certificate is invalid. |
| A vulnerability in the IP Access Restriction feature of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to bypass configured IP access restrictions and log in to the device from a disallowed IP address.
This vulnerability is due to improper enforcement of access controls that are configured using the IP Access Restriction feature. An attacker could exploit this vulnerability by logging in to the API from an unauthorized source IP address. A successful exploit could allow the attacker to gain access to the targeted device from an IP address that should have been restricted. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability was found in harry0703 MoneyPrinterTurbo up to 1.2.6 and classified as critical. Affected by this issue is the function verify_token of the file app/controllers/base.py of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely. |
| A vulnerability was found in Mercusys MW301R 1.0.2 Build 190726 Rel.59423n. It has been rated as problematic. This issue affects some unknown processing of the component Login. The manipulation leads to improper restriction of excessive authentication attempts. The attack can only be initiated within the local network. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An unauthenticated file download vulnerability exists in LimeSurvey versions from 2.0+ up to and including 2.06+ Build 151014. The application fails to validate serialized input to the admin backup endpoint (`index.php/admin/update/sa/backup`), allowing attackers to specify arbitrary file paths using a crafted `datasupdateinfo` payload. The files are packaged in a ZIP archive and made available for download without authentication. This vulnerability can be exploited to read arbitrary files on the host system, including sensitive OS and configuration files. |
| A rate limiting issue in Sylius v2.0.2 allows a remote attacker to perform unrestricted brute-force attacks on user accounts, significantly increasing the risk of account compromise and denial of service for legitimate users. The Supplier's position is that the Sylius core software is not intended to address brute-force attacks; instead, customers deploying a Sylius-based system are supposed to use "firewalls, rate-limiting middleware, or authentication providers" for that functionality. |
| A hidden remote support feature protected by a static secret in TOTOLINK N300RB firmware version 8.54 allows an authenticated attacker to execute arbitrary OS commands with root privileges. |
| An IDOR (Insecure Direct Object Reference) vulnerability exists in transformeroptimus/superagi version v0.0.14. The application fails to properly check authorization for multiple API endpoints, allowing attackers to view, edit, and delete other users' information without proper authorization. Affected endpoints include but are not limited to /get/project/{project_id}, /get/schedule_data/{agent_id}, /delete/{agent_id}, /get/organisation/{organisation_id}, and /get/user/{user_id}. |
