| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Missing Release of Resource after Effective Lifetime vulnerability the xinetd process, responsible for spawning SSH daemon (sshd) instances, of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS) by blocking SSH access for legitimate users. Continued receipt of these connections will create a sustained Denial of Service (DoS) condition.
The issue is triggered when a high rate of concurrent SSH requests are received and terminated in a specific way, causing xinetd to crash, and leaving defunct sshd processes. Successful exploitation of this vulnerability blocks both SSH access as well as services which rely upon SSH, such as SFTP, and Netconf over SSH.
Once the system is in this state, legitimate users will be unable to SSH to the device until service is manually restored. See WORKAROUND section below.
Administrators can monitor an increase in defunct sshd processes by utilizing the CLI command:
> show system processes | match sshd
root 25219 30901 0 Jul16 ? 00:00:00 [sshd] <defunct>
This issue affects Juniper Networks Junos OS Evolved:
* All versions prior to 21.4R3-S7-EVO
* 22.3-EVO versions prior to 22.3R2-S2-EVO, 22.3R3-S2-EVO;
* 22.4-EVO versions prior to 22.4R3-EVO;
* 23.2-EVO versions prior to 23.2R2-EVO.
This issue does not affect Juniper Networks Junos OS Evolved 22.1-EVO nor 22.2-EVO. |
| An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition.
Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset:
BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list)
Only systems with segment routing enabled are vulnerable to this issue.
This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session.
This issue affects:
Junos OS:
* All versions before 21.4R3-S8,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S3,
* from 23.2 before 23.2R2-S1,
* from 23.4 before 23.4R1-S2, 23.4R2.
Junos OS Evolved:
* All versions before 21.4R3-S8-EVO,
* from 22.2-EVO before 22.2R3-S4-EVO,
* from 22.3-EVO before 22.3R3-S3-EVO,
* from 22.4-EVO before 22.4R3-S3-EVO,
* from 23.2-EVO before 23.2R2-S1-EVO,
* from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO. |
| A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability the
Routing Protocol Daemon (rpd)
of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to inject incremental routing updates when BGP multipath is enabled, causing rpd to crash and restart, resulting in a Denial of Service (DoS). Since this is a timing issue (race condition), the successful exploitation of this vulnerability is outside the attacker's control. However, continued receipt and processing of this packet may create a sustained Denial of Service (DoS) condition.
On all Junos OS and Junos OS Evolved platforms with BGP multipath enabled, a specific multipath calculation removes the original next hop from the multipath lead routes nexthop-set. When this change happens, multipath relies on certain internal timing to record the update. Under certain circumstance and with specific timing, this could result in an rpd crash.
This issue only affects systems with BGP multipath enabled.
This issue affects:
Junos OS:
* All versions of 21.1
* from 21.2 before 21.2R3-S7,
* from 21.4 before 21.4R3-S6,
* from 22.1 before 22.1R3-S5,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S2,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2.
Junos OS Evolved:
* All versions of 21.1-EVO,
* All versions of 21.2-EVO,
* from 21.4-EVO before 21.4R3-S6-EVO,
* from 22.1-EVO before 22.1R3-S5-EVO,
* from 22.2-EVO before 22.2R3-S3-EVO,
* from 22.3-EVO before 22.3R3-S2-EVO,
* from 22.4-EVO before 22.4R3-EVO,
* from 23.2-EVO before 23.2R2-EVO.
Versions of Junos OS before 21.1R1 are unaffected by this vulnerability.
Versions of Junos OS Evolved before 21.1R1-EVO are unaffected by this vulnerability. |
| Dell NetWorker, version(s) prior to 19.11.0.3, all versions of 19.10 & prior versions contain(s) an Unquoted Search Path or Element vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Layer 2 Address Learning Daemon (l2ald) on Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause Denial of Service (DoS).
In an EVPN/VXLAN scenario, when a high amount specific Layer 2 packets are processed by the device, it can cause the Routing Protocol Daemon (rpd) to utilize all CPU resources which causes the device to hang. A manual restart of the rpd is required to restore services.
This issue affects both IPv4 and IPv6 implementations.
This issue affects
Junos OS:
All versions earlier than 21.4R3-S7;
22.1 versions earlier than 22.1R3-S5;
22.2 versions earlier than 22.2R3-S3;
22.3 versions earlier than 22.3R3-S3;
22.4 versions earlier than 22.4R3-S2;
23.2 versions earlier than 23.2R2;
23.4 versions earlier than 23.4R1-S1.
Junos OS Evolved:
All versions earlier than 21.4R3-S7-EVO;
22.1-EVO versions earlier than 22.1R3-S5-EVO;
22.2-EVO versions earlier than 22.2R3-S3-EVO;
22.3-EVO versions earlier than 22.3R3-S3-EVO;
22.4-EVO versions earlier than 22.4R3-S2-EVO;
23.2-EVO versions earlier than 23.2R2-EVO;
23.4-EVO versions earlier than 23.4R1-S1-EVO, 23.4R2-EVO. |
| An Improper Check or Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
An attacker can send specific traffic to the device, which causes the rpd to crash and restart. Continued receipt of this traffic will result in a sustained DoS condition.
This issue only affects devices with an EVPN-VPWS instance with IGMP-snooping enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S10,
* from 21.4 before 21.4R3-S6,
* from 22.1 before 22.1R3-S5,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S2,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2;
Junos OS Evolved:
* All versions before 20.4R3-S10-EVO,
* from 21.4-EVO before 21.4R3-S6-EVO,
* from 22.1-EVO before 22.1R3-S5-EVO,
* from 22.2-EVO before 22.2R3-S3-EVO,
* from 22.3-EVO before 22.3R3-S2-EVO,
* from 22.4-EVO before 22.4R3-EVO,
* from 23.2-EVO before 23.2R2-EVO. |
| The Easy Digital Downloads WordPress plugin before 2.11.6 does not have CSRF check in place when inserting payment notes, which could allow attackers to make a logged admin insert arbitrary notes via a CSRF attack |
| The Easy Digital Downloads (EDD) Quota theme for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) QR Code extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Pushover Notifications extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Per Product Emails extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) PDF Stamper extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Free Downloads extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) CSV Manager extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Commissions extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Attach Accounts to Orders extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Invoices extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Favorites extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Cross-sell Upsell extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
| The Easy Digital Downloads (EDD) Content Restriction extension for WordPress, as used with EDD 1.8.x before 1.8.7, 1.9.x before 1.9.10, 2.0.x before 2.0.5, 2.1.x before 2.1.11, 2.2.x before 2.2.9, and 2.3.x before 2.3.7, has XSS because add_query_arg is misused. |
