| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| A vulnerability was found in kronosnet's (version <=1.34) cryptographic configuration management. The framework does not correctly zero-out or wipe sensitive memory segments after executing changes to its cryptographic configuration. This omission leaves raw encryption keys resident in memory after the associated structures are freed. A local attacker capable of leveraging memory disclosure techniques could exploit this flaw to retrieve the active encryption key, allowing them to decrypt cluster network communications or inject malicious packets to cause severe high-availability cluster instability. |
| A vulnerability was found in the internal Access Control List (ACL) subsystem of kronosnet (Version affected: <= 1.34). When the framework is explicitly configured to manage dynamic links (accepting network traffic from any IP address) without network payload encryption, the validation architecture implicitly trusts the link ID provided within incoming data packets. A remote, unauthenticated attacker can exploit this lack of validation by spoofing a legitimate link ID inside crafted network frames. This allows the attacker to fully bypass the ACL framework and inject arbitrary data packets into the application layer, potentially leading to data corruption or service instabilities. |
| In CAXperts UPVWebServices 2.4.2212.603 through 2.7.6 and UDiTH Portal 2026.0.0 through 2026.2.0, an authenticated remote user can invoke an administrative API endpoint intended for privileged users. Due to missing authorization checks, this allows the attacker to deactivate the application's license. |
| An issue in Code27 Companion Hub SQ3A.220705.003.A1 allows a physically proximate attacker to execute arbitrary code via the USB debugging (ADB) and Android Debug Bridge components |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Prefer NLA_NUL_STRING
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| A vulnerability in Legion of the Bouncy Castle Inc. BC-LTS bcprov-lts8on on X86_64, AVX, AVX-512f, Linux, Legion of the Bouncy Castle Inc. BC-FJA bc-fips on Linux, X86_64, AVX, AVX-512f.
This vulnerability is associated with program files gcm128w, gcm512w, gcm128w.C, gcm512w.C.
This issue affects BC-LTS: from 2.73.0 before 2.73.11; BC-FJA: from 2.1.0 before 2.1.3. |
| A NULL pointer dereference in the SQLite Session Extension in SQLite 3.53.1 and SQLite trunk builds before check-in e807d4e3798efd53 allows an attacker who can supply a malformed changeset blob to cause a denial of service. The issue occurs when sqlite3changeset_apply_v3() applies a corrupt changeset and reaches sqlite3_value_type() with a NULL sqlite3_value pointer. |
| A protection mechanism failure in the Code 27 Companion Hub allows an attacker with physical access to completely bypass kiosk restrictions via a factory reset |
| An OS command injection vulnerability exists in the start_bonjour() function of the "rc" binary in Cisco RV130/RV130W with firmware 1.0.3.55 and RV110W routers with firmware 1.2.2.5 / 1.2.2.8. The wan_hostname configuration parameter is not properly sanitized, which could allow an authenticated remote attacker to execute arbitrary OS commands with root privileges. |
| An OS command injection vulnerability exists in the start_lltd() function of the "rc" binary in Cisco RV130/RV130W with firmware 1.0.3.55 and RV110W routers with firmware 1.2.2.5 / 1.2.2.8. The machine_name configuration parameter is not properly sanitized, which could allow an authenticated remote attacker to execute arbitrary OS commands with root privileges. |
| Incorrect authorization in the XML-RPC API of WebPros Plesk before 18.0.78.4 allows a low-privileged authenticated customer to look up domains they do not own, because ownership is enforced only for certain lookup filters and schema validation is bypassed for legacy protocol versions. This results in cross-tenant disclosure of other tenants' FTP credentials stored in cleartext, which can be leveraged to execute code as another tenant's system user. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
When uart_flush_buffer() runs before the DMA completion IRQ is delivered,
the following race can occur (all steps serialized by uart_port_lock):
1. DMA starts: tx_remaining = N, kfifo contains N bytes
2. DMA completes in hardware; IRQ is pending but not yet delivered
3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(),
making kfifo_len() = 0 while tx_remaining remains N
4. uart_flush_buffer() releases the port lock
5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls
uart_xmit_advance(uport, tx_remaining) on an empty kfifo
uart_xmit_advance() increments kfifo->out by tx_remaining. Since
kfifo_reset() already set both in and out to 0, out wraps past in,
causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next
start_tx_dma() call then submits a DMA transfer of stale buffer data.
Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()
and skipping uart_xmit_advance() when fifo_len < tx_remaining, which
indicates the kfifo was reset by a preceding flush. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| A container privilege escalation flaw was found in certain Ansible Automation Platform images. This issue arises from the /etc/passwd file being created with group-writable permissions during the build process. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This vulnerability allows an attacker to add a new user with any arbitrary UID, including UID 0, gaining full root privileges within the container. |
| Uncontrolled search path element issue exists in Pupsman versions prior to 3.9.0. If a crafted DLL file is placed in the same folder as the affected installer and the installer is executed, arbitrary code may be executed with SYSTEM privilege. |
| Incorrect default permissions issue exists in Pupsman versions prior to 3.9.0. An attacker can place a malicious executable in the installation folder, which results in arbitrary code execution with SYSTEM privilege |
