| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| DexLoader function get_stringidx_fromdex() in Redex prior to commit 3b44c64 can load an out of bound address when loading the string index table, potentially allowing remote code execution during processing of a 3rd party Android APK file. |
| Unrestricted file size limit can lead to DoS in tooljet/tooljet <1.27 by allowing a logged in attacker to upload profile pictures over 2MB.
|
| Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, `istiod`, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing. This endpoint is served over TLS port 15012, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [multicluster](https://istio.io/latest/docs/setup/install/multicluster/primary-remote/) topologies, this port is exposed over the public internet. There are no effective workarounds, beyond upgrading. Limiting network access to Istiod to the minimal set of clients can help lessen the scope of the vulnerability to some extent. |
| Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability. |
| eLabFTW is an electronic lab notebook manager for research teams. Prior to version 4.3.0, a vulnerability allows an authenticated user with an administrator role in a team to assign itself system administrator privileges within the application, or create a new system administrator account. The issue has been corrected in eLabFTW version 4.3.0. In the context of eLabFTW, an administrator is a user account with certain privileges to manage users and content in their assigned team/teams. A system administrator account can manage all accounts, teams and edit system-wide settings within the application. The impact is not deemed as high, as it requires the attacker to have access to an administrator account. Regular user accounts cannot exploit this to gain admin rights. A workaround for one if the issues is removing the ability of administrators to create accounts. |
| AES Crypt is a file encryption software for multiple platforms. AES Crypt for Linux built using the source on GitHub and having the version number 3.11 has a vulnerability with respect to reading user-provided passwords and confirmations via command-line prompts. Passwords lengths were not checked before being read. This vulnerability may lead to buffer overruns. This does _not_ affect source code found on aescrypt.com, nor is the vulnerability present when providing a password or a key via the `-p` or `-k` command-line options. The problem was fixed via in commit 68761851b and will be included in release 3.16. Users are advised to upgrade. Users unable to upgrade should us the `-p` or `-k` options to provide a password or key. |
| Flux is an open and extensible continuous delivery solution for Kubernetes. Versions prior to 0.35.0 are subject to a Denial of Service. Users that have permissions to change Flux’s objects, either through a Flux source or directly within a cluster, can provide invalid data to fields `.spec.interval` or `.spec.timeout` (and structured variations of these fields), causing the entire object type to stop being processed. This issue is patched in version 0.35.0. As a workaround, Admission controllers can be employed to restrict the values that can be used for fields `.spec.interval` and `.spec.timeout`, however upgrading to the latest versions is still the recommended mitigation. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Versions prior to 4.10.17, and prior to 5.2.8 on the 5.x branch, crash when a file download request is received with an invalid byte range, resulting in a Denial of Service. This issue has been patched in versions 4.10.17, and 5.2.8. There are no known workarounds. |
| conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet. |
| phpCAS is an authentication library that allows PHP applications to easily authenticate users via a Central Authentication Service (CAS) server. The phpCAS library uses HTTP headers to determine the service URL used to validate tickets. This allows an attacker to control the host header and use a valid ticket granted for any authorized service in the same SSO realm (CAS server) to authenticate to the service protected by phpCAS. Depending on the settings of the CAS server service registry in worst case this may be any other service URL (if the allowed URLs are configured to "^(https)://.*") or may be strictly limited to known and authorized services in the same SSO federation if proper URL service validation is applied. This vulnerability may allow an attacker to gain access to a victim's account on a vulnerable CASified service without victim's knowledge, when the victim visits attacker's website while being logged in to the same CAS server. phpCAS 1.6.0 is a major version upgrade that starts enforcing service URL discovery validation, because there is unfortunately no 100% safe default config to use in PHP. Starting this version, it is required to pass in an additional service base URL argument when constructing the client class. For more information, please refer to the upgrading doc. This vulnerability only impacts the CAS client that the phpCAS library protects against. The problematic service URL discovery behavior in phpCAS < 1.6.0 will only be disabled, and thus you are not impacted from it, if the phpCAS configuration has the following setup: 1. `phpCAS::setUrl()` is called (a reminder that you have to pass in the full URL of the current page, rather than your service base URL), and 2. `phpCAS::setCallbackURL()` is called, only when the proxy mode is enabled. 3. If your PHP's HTTP header input `X-Forwarded-Host`, `X-Forwarded-Server`, `Host`, `X-Forwarded-Proto`, `X-Forwarded-Protocol` is sanitized before reaching PHP (by a reverse proxy, for example), you will not be impacted by this vulnerability either. If your CAS server service registry is configured to only allow known and trusted service URLs the severity of the vulnerability is reduced substantially in its severity since an attacker must be in control of another authorized service. Otherwise, you should upgrade the library to get the safe service discovery behavior. |
| Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available. |
| Tensorflow is an Open Source Machine Learning Framework. During shape inference, TensorFlow can allocate a large vector based on a value from a tensor controlled by the user. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range. |
| TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.LSTMBlockCell` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate the ranks of any of the arguments to this API call. This results in `CHECK`-failures when the elements of the tensor are accessed. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue. |
| TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.Conv3DBackpropFilterV2` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate that the `filter_sizes` argument is a vector. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue. |
| TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.ragged.constant` does not fully validate the input arguments. This results in a denial of service by consuming all available memory. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue. |
| Binary provides encoding/decoding in Borsh and other formats. The vulnerability is a memory allocation vulnerability that can be exploited to allocate slices in memory with (arbitrary) excessive size value, which can either exhaust available memory or crash the whole program. When using `github.com/gagliardetto/binary` to parse unchecked (or wrong type of) data from untrusted sources of input (e.g. the blockchain) into slices, it's possible to allocate memory with excessive size. When `dec.Decode(&val)` method is used to parse data into a structure that is or contains slices of values, the length of the slice was previously read directly from the data itself without any checks on the size of it, and then a slice was allocated. This could lead to an overflow and an allocation of memory with excessive size value. Users should upgrade to `v0.7.1` or higher. A workaround is not to rely on the `dec.Decode(&val)` function to parse the data, but to use a custom `UnmarshalWithDecoder()` method that reads and checks the length of any slice. |
| linked_list_allocator is an allocator usable for no_std systems. Prior to version 0.10.2, the heap initialization methods were missing a minimum size check for the given heap size argument. This could lead to out-of-bound writes when a heap was initialized with a size smaller than `3 * size_of::<usize>` because of metadata write operations. This vulnerability impacts all the initialization functions on the `Heap` and `LockedHeap` types, including `Heap::new`, `Heap::init`, `Heap::init_from_slice`, and `LockedHeap::new`. It also affects multiple uses of the `Heap::extend` method. Version 0.10.2 contains a patch for the issue. As a workaround, ensure that the heap is only initialized with a size larger than `3 * size_of::<usize>` and that the `Heap::extend` method is only called with sizes larger than `2 * size_of::<usize>()`. Also, ensure that the total heap size is (and stays) a multiple of `2 * size_of::<usize>()`. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. xmldom parses XML that is not well-formed because it contains multiple top level elements, and adds all root nodes to the `childNodes` collection of the `Document`, without reporting any error or throwing. This breaks the assumption that there is only a single root node in the tree, which led to issuance of CVE-2022-39299 as it is a potential issue for dependents. Update to @xmldom/xmldom@~0.7.7, @xmldom/xmldom@~0.8.4 (dist-tag latest) or @xmldom/xmldom@>=0.9.0-beta.4 (dist-tag next). As a workaround, please one of the following approaches depending on your use case: instead of searching for elements in the whole DOM, only search in the `documentElement`or reject a document with a document that has more then 1 `childNode`. |
| A vulnerability has been identified in SICAM PAS/PQS (All versions < V7.0), SICAM PAS/PQS (All versions >= 7.0 < V8.06). Affected software does not properly validate the input for a certain parameter in the s7ontcp.dll. This could allow an unauthenticated remote attacker to send messages and create a denial of service condition as the application crashes. At the time of assigning the CVE, the affected firmware version of the component has already been superseded by succeeding mainline versions. |
| Memory Corruption in modem due to improper length check while copying into memory in Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Voice & Music |
