| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a network attacker who can reach an etcd TLS listener can open many TCP connections and never send a ClientHello. In client/pkg/transport/listener_tls.go, each connection handled by tlsListener.acceptLoop spawns a goroutine that blocks indefinitely inside tls.Conn.Handshake() and remains tracked in the pending map. Unbounded goroutine and map growth can exhaust memory in the etcd process, causing loss of availability for the cluster and, when etcd backs Kubernetes, the control plane. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. |
| Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an unauthenticated SSH client can cause a denial of service by sending SSH_MSG_KEX_ECDH_INIT with a 32-byte all-zero Q_C value. Curve25519Kex::server_dh in russh/src/kex/curve25519.rs accepts the all-zero peer public value and computes an all-zero shared secret, after which compute_exchange_hash calls encode_mpint in russh/src/kex/mod.rs and indexes beyond the end of the input while skipping leading zero bytes. The resulting panic occurs before authentication and terminates the server key-exchange task. This issue is fixed in version 0.62.4. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In 0.28.8 and earlier, an authenticated user who can create or update file mounts for a service can inject shell metacharacters into filePath, causing Dokploy to execute attacker-controlled commands on the configured remote managed server over SSH. In the default deployment model, this yields direct remote host RCE from the web interface. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, application.saveBitbucketProvider stores bitbucketOwner and bitbucketRepository without validation and cloneBitbucketRepository in packages/server/src/utils/providers/bitbucket.ts interpolates those values into git clone commands executed through execAsync or execAsyncRemote, allowing a member with service deployment permission to execute arbitrary operating system commands on the Dokploy host or target server. This issue is fixed in version 0.29.13. |
| Discourse is an open-source discussion platform. Prior to 026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, a low-privileged user could place crafted content in the moderation review queue that executed stored cross-site scripting when a moderator viewed it on a site with a modified or disabled default Content Security Policy. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| Discourse is an open-source discussion platform. Prior to 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, TopicLink.extract_from, TopicLink.ensure_entry_for, and TopicLink.duplicate_lookup do not consistently enforce Guardian.can_see? checks when processing internal links. An authenticated user can submit links to restricted topics, private messages, or hidden posts and receive canonicalized slugs or titles in the composer_messages duplicate_lookup response even though the targets are not visible to that user. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| Chatwoot is a customer engagement suite. Prior to 4.9.0, Chatwoot allowed authenticated account administrators to transfer Portals, Automation Rules, Macros, and Twilio Channels to other accounts through the writable account_id parameter. This could break tenant isolation and cause cross-account data exposure, unauthorized configuration changes, or loss of access to transferred resources. This issue is fixed in version 4.9.0. |
| Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.3, the Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue is fixed in version 2026.8.1. |
| ColdFusion is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Ghostfolio is an open source wealth management software. Prior to version 3.4.0, Ghostfolio's Stripe checkout success-URL handler at `GET /api/v1/subscription/stripe/callback?checkoutSessionId=<id>` retrieves the Stripe Checkout Session by ID and unconditionally grants a Premium subscription to the session's `client_reference_id` — without ever checking `session.payment_status` or `session.status`. There is no separate Stripe webhook endpoint with `stripe-signature` verification; this callback is the sole code path that creates Stripe-driven subscriptions. Any authenticated user can self-grant a 1-year Premium subscription without ever paying. Version 3.4.0 rejects sessions unless `session.payment_status === 'paid'` AND `session.status === 'complete'` (fails closed). Additionally, new unique `stripeCheckoutSessionId` column → a session can't be redeemed twice (race-safe via DB unique constraint). |
| The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, a user-supplied private/local URI can be made to be fetched without checks. Version 1.12.2 contains a fix. No known workarounds are available. |
| ColdFusion is affected by an Incorrect Authorization vulnerability that could result in an application denial-of-service. A low-privileged attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes
valid QUIC Initial packets for unknown destination connection IDs, it
can allocate and queue new incoming channels without enforcing any limit.
Impact summary: A remote peer that can make many Initial packets reach the
server listener faster than the application accepts connections, can cause the
memory allocated to store the per-channel state to grow without any limits,
potentially making the QUIC listener unavailable and causing Denial of Service.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The function that handles inbound QUIC packets uses
Connection-Id from the packet header to find an existing connection
(QUIC channel). If no existing connection is found and the packet
type is INITIAL, the function treats the packet as a new connection. It
allocates a new channel object and inserts it into a queue where it
waits to be accepted by the local application with SSL_accept(3ossl).
The memory occupied by these initial channel objects may grow
without bounds if the application is not able to call SSL_accept()
frequently enough to serve these inbound connection requests.
The issue is present since OpenSSL 3.5 when the QUIC server implementation
was added.
The fix introduces a limit for pending connections. The default limit is set
to 256 pending connections (waiting to be accepted by the local application).
Applications may change the default by calling SSL_set_value_uint(3ossl).
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| is affected by an Improper Encoding or Escaping of Output vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain limited unauthorized write access, causing a limited disruption to availability. Exploitation of this issue does not require user interaction. |
| ColdFusion is affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker with high privileges could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| ColdFusion is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. Scope is changed. |
| The Ecwid by Lightspeed Ecommerce Shopping Cart WordPress plugin before 7.0.9 does not perform a capability check or nonce verification on one of its store-management actions, allowing any authenticated user, such as a subscriber, to disconnect the store and take the storefront offline until an administrator reconnects it. |
