| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PlaywrightCapture is a simple replacement for splash using playwright. Prior to 1.39.6, PlaywrightCapture did not sufficiently restrict navigations and resource requests initiated by rendered pages. An attacker-controlled page could abuse browser-side redirection mechanisms, such as window.location.href, to make the capture process open file:// URLs or request resources hosted on private, loopback, link-local, or otherwise non-public IP addresses. In deployments where PlaywrightCapture processes untrusted URLs, this could allow a remote attacker to perform server-side request forgery against internal services or attempt to access local files from the capture environment. Depending on what capture artifacts are generated and exposed, responses from those resources could potentially be leaked through screenshots, saved page content, logs, or other capture outputs. This vulnerability is fixed in 1.39.6. |
| A vulnerability has been found in YunaiV yudao-cloud 2026.03. This affects the function IotDataSinkHttpConfig of the file /admin-api/iot/data-sink/create of the component Admin API Endpoint. Such manipulation leads to server-side request forgery. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, the OAuth2 token fetch function in packages/server/src/sdk/workspace/oauth2/utils.ts uses raw fetch(config.url) with no SSRF protection. The safe wrapper fetchWithBlacklist() exists in the same codebase and is used in every other outbound HTTP call (automation steps, plugin downloads, object store), but was not applied to the OAuth2 token endpoint. A user with BUILDER role can point the OAuth2 token URL to internal services (CouchDB, cloud metadata) to exfiltrate sensitive data. This vulnerability is fixed in 3.39.0. |
| Budibase is an open-source low-code platform. Prior to 3.35.10, the Plugin URL upload endpoint (POST /api/plugin) validates the submitted URL with a single substring check: url.includes(".tar.gz"). Any URL containing .tar.gz anywhere in the string — in the path, query string, or fragment — passes this check. The URL then proceeds directly to fetchWithBlacklist() with no further validation of host, scheme, or path. Standalone, this vulnerability is blocked by Budibase's default SSRF blacklist, which covers private IP ranges. But the URL validation layer itself is broken regardless, and it directly enables SSRF in two realistic situations: (1) when chained with the BLACKLIST_IPS bypass ([001]), where the blacklist is empty; and (2) when the plugin server follows HTTP redirects from an external URL to an internal target (the default node-fetch behavior with redirect: 'follow'). This vulnerability is fixed in 3.35.10. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: initialise event handler read bytes
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Release per-CPU pgmap ref when vm_insert_page() fails
When vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap()
doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquired
after gen_pool_alloc_owner(), and memunmap_pages() will hang forever when
trying to remove the PCI device.
Fix it by adding the missed percpu_ref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - fix kernel panic in driver detach
During driver detach, the same hash algorithm is unregistered multiple
times due to a wrong iterator. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix dirtyclusters double decrement on fs shutdown
fstests test generic/388 occasionally reproduces a warning in
ext4_put_super() associated with the dirty clusters count:
WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]
Tracing the failure shows that the warning fires due to an
s_dirtyclusters_counter value of -1. IOW, this appears to be a
spurious decrement as opposed to some sort of leak. Further tracing
of the dirty cluster count deltas and an LLM scan of the resulting
output identified the cause as a double decrement in the error path
between ext4_mb_mark_diskspace_used() and the caller
ext4_mb_new_blocks().
First, note that generic/388 is a shutdown vs. fsstress test and so
produces a random set of operations and shutdown injections. In the
problematic case, the shutdown triggers an error return from the
ext4_handle_dirty_metadata() call(s) made from
ext4_mb_mark_context(). The changed value is non-zero at this point,
so ext4_mb_mark_diskspace_used() does not exit after the error
bubbles up from ext4_mb_mark_context(). Instead, the former
decrements both cluster counters and returns the error up to
ext4_mb_new_blocks(). The latter falls into the !ar->len out path
which decrements the dirty clusters counter a second time, creating
the inconsistency.
To avoid this problem and simplify ownership of the cluster
reservation in this codepath, lift the counter reduction to a single
place in the caller. This makes it more clear that
ext4_mb_new_blocks() is responsible for acquiring cluster
reservation (via ext4_claim_free_clusters()) in the !delalloc case
as well as releasing it, regardless of whether it ends up consumed
or returned due to failure. |
| eventsource-encoder encodes events as well-formed EventSource/Server Sent Event (SSE) messages. Prior to 1.0.2, eventsource-encoder does not sanitize the event or id fields of an EventSourceMessage before serializing them. An attacker who controls either field can inject arbitrary Server-Sent Events line terminators (\n, \r, or \r\n) and thereby forge additional SSE fields or entire messages on the stream. This vulnerability is fixed in 1.0.2. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the REST datasource integration (packages/server/src/integrations/rest.ts) follows HTTP redirects without re-checking the IP blacklist, allowing an authenticated Builder to access internal services (cloud metadata, databases) by redirecting through an attacker-controlled server. This vulnerability is fixed in 3.38.1. |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. |
| With valid login credentials, URL Redirection to Untrusted Site ('Open Redirect'), Server-Side Request Forgery (SSRF) vulnerability in Apache Shiro.
This issue affects Apache Shiro from 2.0-alpha to 2.1.0, and 3.0.0-alpha-1, only when using shiro-jakarta-ee integration module.
Users are recommended to upgrade to version 2.1.1, or 3.0.0-alpha-2 or later, which fixes the issue by encrypting the cookie.
After successful login, Jakarta EE integration module uses shiroSavedRequest cookie to redirect to a particular web page after login.
This cookie was not validated, and can be forged to send a HTTP GET request from the server itself to an arbitrary URL from the cookie. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| Insufficient character filtering in backup agent signing module on Comet Backup server allows authenticated tenant administrator to execute an arbitrary code on behalf of a privileged user on the affected server and connected devices. |
| A vulnerability was determined in code-projects Employee Management System 1.0. This affects an unknown function of the file /applyleave.php. Executing a manipulation of the argument ID can lead to cross site scripting. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/actions_addupdatedelete.inc.php |
| WeGIA is a web manager for charitable institutions. In versions prior to 3.7.3, when a user logs in, html/login.php hashes the submitted password using PHP's hash() function with the SHA-256 algorithm and no salt before comparing it to the stored value. The password change flow in controle/FuncionarioControle.php follows the same pattern. SHA-256 is a general-purpose cryptographic hash built for speed, not password storage. Without a salt, identical passwords produce identical digests, making the entire hash database vulnerable to a single precomputed rainbow table lookup. This vulnerability is fixed in 3.7.3. |
