| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory request logic vulnerability in the memory module.
Impact: Successful exploitation of this vulnerability will affect integrity and availability. |
| Access control vulnerability in the security verification module.
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| Privilege escalation vulnerability in the account synchronisation module.
Impact: Successful exploitation of this vulnerability will affect availability. |
| SAP CRM (WebClient UI Framework) allows an
authenticated attacker to enumerate accessible HTTP endpoints in the internal
network by specially crafting HTTP requests. On successful exploitation this
can result in information disclosure. It has no impact on integrity and
availability of the application. |
| SAP Landscape Management allows an authenticated
user to read confidential data disclosed by the REST Provider Definition
response. Successful exploitation can cause high impact on confidentiality of
the managed entities. |
| Elements of PDCE does not perform necessary
authorization checks for an authenticated user, resulting in escalation of
privileges.
This
allows an attacker to read sensitive information causing high impact on the
confidentiality of the application. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis management daemon (chassisd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a
Denial-of-Service (DoS).
If an attempt is made to access specific sensors on platforms not supporting these sensors, either via GRPC or netconf, chassisd will crash and restart leading to a restart of all FPCs and thereby a complete outage.
This issue affects Junos OS:
* 21.4 versions from 21.4R3 before 21.4R3-S5,
* 22.1 versions from 22.1R3 before 22.1R3-S4,
* 22.2 versions from 22.2R2 before 22.2R3,
* 22.3 versions from 22.3R1 before 22.3R2-S2, 22.3R3,
* 22.4 versions from 22.4R1 before 22.4R2.
This issue does not affect Junos OS versions earlier than 21.4. |
| A Use of Externally-Controlled Format String vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If DNS Domain Generation Algorithm (DGA) detection or tunnel detection, and DNS-filtering traceoptions are configured, and specific valid transit DNS traffic is received this causes a PFE crash and restart, leading to a Denial of Service.
This issue affects Junos OS:
* All versions before 21.4R3-S6,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S3,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Use After Free vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated, network-based attacker to cause a Denial of Service (DoS).On all Junos OS and Junos Evolved platforms, if a routing-instance deactivation is triggered, and at the same time a specific SNMP request is received, a segmentation fault occurs which causes rpd to crash and restart.
This issue affects:
Junos OS:
* All versions before 21.2R3-S8,
* 21.4 versions before 21.4R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2.
Junos OS Evolved:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S5-EVO,
* 22.2-EVO versions before 22.2R3-S3-EVO,
* 22.3-EVO versions before 22.3R3-S2-EVO,
* 22.4-EVO versions before 22.4R3-EVO,
* 23.2-EVO versions before 23.2R2-EVO. |
| An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system.
The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level.
This issue affects Junos OS Evolved:
All versions before 20.4R3-S7-EVO,
21.2-EVO versions before 21.2R3-S8-EVO,
21.4-EVO versions before 21.4R3-S7-EVO,
22.2-EVO versions before 22.2R3-EVO,
22.3-EVO versions before 22.3R2-EVO,
22.4-EVO versions before 22.4R2-EVO. |
| An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system.
The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level.
This issue affects Junos OS Evolved:
* All versions before 20.4R3-S7-EVO,
* 21.2-EVO versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.1-EVO versions before 22.1R3-S6-EVO,
* 22.2-EVO versions before 22.2R3-EVO,
* 22.3-EVO versions before 22.3R2-EVO,
* 22.4-EVO versions before 22.4R2-EVO. |
| An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system.
The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level.
This issue affects Junos OS Evolved:
* 22.3-EVO versions before 22.3R2-EVO,
* 22.4-EVO versions before 22.4R1-S1-EVO, 22.4R2-EVO. |
| An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system.
The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level.
This issue affects Junos OS Evolved:
* 21.1-EVO versions 21.1R1-EVO and later before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.1-EVO versions before 22.1R3-S6-EVO,
* 22.2-EVO versions before 22.2R3-EVO,
* 22.3-EVO versions before 22.3R2-EVO. |
| An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system.
The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level.
This issue affects Junos OS Evolved:
* All version before 20.4R3-S6-EVO,
* 21.2-EVO versions before 21.2R3-S4-EVO,
* 21.4-EVO versions before 21.4R3-S6-EVO,
* 22.2-EVO versions before 22.2R2-S1-EVO, 22.2R3-EVO,
* 22.3-EVO versions before 22.3R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated, adjacent attacker to cause a
Denial-of-Service (DoS).
On all ACX 7000 Series platforms running
Junos OS Evolved, and configured with IRBs, if a Customer Edge device (CE) device is dual homed to two Provider Edge devices (PE) a traffic loop will occur when the CE sends multicast packets. This issue can be triggered by IPv4 and IPv6 traffic.
This issue affects Junos OS Evolved:
All versions from 22.2R1-EVO and later versions before 22.4R2-EVO,
This issue does not affect Junos OS Evolved versions before 22.1R1-EVO. |
| A Heap-based Buffer Overflow vulnerability in the telemetry sensor process (sensord) of Juniper Networks Junos OS on MX240, MX480, MX960 platforms using MPC10E causes a steady increase in memory utilization, ultimately leading to a Denial of Service (DoS).
When the device is subscribed to a specific subscription on Junos Telemetry Interface, a slow memory leak occurs and eventually all resources are consumed and the device becomes unresponsive. A manual reboot of the Line Card will be required to restore the device to its normal functioning.
This issue is only seen when telemetry subscription is active.
The Heap memory utilization can be monitored using the following command:
> show system processes extensive
The following command can be used to monitor the memory utilization of the specific sensor
> show system info | match sensord
PID NAME MEMORY PEAK MEMORY %CPU THREAD-COUNT CORE-AFFINITY UPTIME
1986 sensord 877.57MB 877.57MB 2 4 0,2-15 7-21:41:32
This issue affects Junos OS:
* from 21.2R3-S5 before 21.2R3-S7,
* from 21.4R3-S4 before 21.4R3-S6,
* from 22.2R3 before 22.2R3-S4,
* from 22.3R2 before 22.3R3-S2,
* from 22.4R1 before 22.4R3,
* from 23.2R1 before 23.2R2. |
| In faceid servive, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed |
| In faceid servive, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed |
| In trusty service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with System execution privileges needed |
| In trusty service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with System execution privileges needed |
