| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CakePHP is a rapid development framework for PHP. Prior to 4.5.12, 4.6.5, 5.1.9, 5.2.14, and 5.3.7, FunctionsBuilder::cast, FunctionsBuilder::extract, FunctionsBuilder::datePart, and FunctionsBuilder::dateAdd in src/Database/FunctionsBuilder.php accept user-controlled dataType, part, or unit values and incorporate them into generated SQL as unescaped structural fragments. An application that passes untrusted input to these parameters can permit SQL injection with confidentiality, integrity, and availability impact according to the database connection's privileges. This issue is fixed in versions 4.5.12, 4.6.5, 5.1.9, 5.2.14, and 5.3.7. |
| The affected products are missing authorization on state-changing CGIs and session checks are not performed. |
| The mySCADA myPRO Manager command API does not properly enforce authentication for privileged functions. An unauthenticated attacker with network access to the affected API could exploit this vulnerability to access privileged management functions. |
| The myPRO Manager notification gateway exposes an unauthenticated HTTP endpoint used to send SMS messages through a connected GSM modem. The endpoint is accessible over the network and does not require authentication before accepting a phone number and message from a request and sending the specified SMS message. An unauthenticated attacker with network access to the notification gateway could exploit this vulnerability to send arbitrary SMS messages through the connected modem. |
| Netcore NR255-V version 1.5.130703 contains an os command argument injection vulnerability in the Nettools tcpdump launch paths, including ntools_start_set_cgi, ntools_tcpdump_start_set_cgi, exe_default, and ntools_proc components. Attackers can inject crafted arguments into these tcpdump launch routines to manipulate executed system commands on the device. |
| Netcore NR255-V version 1.5.130703 contains a sensitive information disclosure vulnerability in the mod_qos_bandwidth plan.json handling within filter_conns_dump_cgi.c and IGD_CgiCall.c. Authenticated users with broad roles can access these QoS read routes to obtain live network telemetry beyond their intended privilege level. |
| @jitsi/electron-sdk before 10.0.5 exposes getDesktopSources() via contextBridge without requiring an active getDisplayMedia() picker, allowing any script in the meeting page to enumerate screens and windows. Attackers can call the jitsi-screen-sharing-get-sources IPC route to retrieve desktop thumbnails at arbitrary resolution without user consent or operating system permission prompts. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, djust's per-object authorization (`get_object` + `has_object_permission`, ADR-017) was enforced on the WebSocket mount and event paths but not on three other render entry points: (a) the initial HTTP GET render, (b) SPA `url_change` navigation, and (c) `{% live_render %}` embedded child views. An authenticated user could therefore view (and on some paths act on) an object they are not authorized for by loading the page directly, navigating to it via SPA url-change, or composing it as an embedded child — a classic IDOR / broken object-level access control on object-scoped views. This is fixed in djust 1.0.7. All render entry points now route through a shared `enforce_object_permission` chokepoint: HTTP GET returns 403, `url_change` emits a `permission_denied` frame and skips the render, and `{% live_render %}` (eager + lazy) refuses the embed. Views without a custom `get_object` are unaffected (no-op). No reliable workaround short of upgrading. Do not expose object-scoped views through the HTTP-GET / url_change / live_render paths until patched. |
| An issue was discovered in the direct_mail (aka Direct Mail) extension through 9.5.1 for TYPO3. The Configuration backend module of the extension allows an authenticated user to write to an arbitrary TSConfig page for folders configured as Direct Mail. Exploiting this may lead to Configuration Injection (TYPO3 10.4 and above) and to Arbitrary Code Execution (TYPO3 9.5 and below). A valid backend user account, with access to the Direct Mail Configuration backend module, is needed to exploit this. |
| An issue was discovered in the content_consent (aka Content Consent) extension through 2.0.1 for TYPO3. It fails to verify whether a specified content element identifier is permitted by the plugin. This enables an unauthenticated user to display various content elements, leading to an insecure direct object reference (IDOR) issue with the potential to expose internal content elements. |
| EFence developed by Thinking Software Technology has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents. |
| ASRock Polychrome SYNC/RGB software utility developed by ASRock Inc. has an Untrusted Pointer Dereference vulnerability. Authenticated local attackers can send a specially crafted IOCTL request to cause the driver to dereference an unvalidated pointer, resulting in an operating system crash. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| The OpenTelemetry Collector Contrib repository contains components for the OpenTelemetry Collector. Prior to 0.151.0, the githubreceiver validates the receiver/githubreceiver/config.go RequiredHeaders configuration at startup, but receiver/githubreceiver/trace_receiver.go handleReq() does not check those headers on incoming webhook requests. An unauthenticated sender can therefore bypass an operator's required_headers authentication control and submit arbitrary webhook payloads. When the Secret field is empty, github.ValidatePayload also skips HMAC validation, leaving the webhook endpoint without either configured authentication mechanism. Successful exploitation can inject fabricated CI/CD trace data into the observability pipeline. This issue is fixed in version 0.151.0. |
| ExifReader is a JavaScript Exif information parser. Prior to 4.41.1, ExifReader parses attacker-controlled HEIC or AVIF ISO-BMFF files in getItems() within src/image-header-iso-bmff-iloc.js and trusts iloc itemCount and extentCount values while allocating an extent object for every nested-loop iteration. When offsetSize, lengthSize, baseOffsetSize, and indexSize are zero, the extent fields consume no input bytes and the buffer offset does not advance, but the parser can still allocate up to itemCount multiplied by extentCount objects without an allocation budget. A small malicious iloc box can therefore cause hundreds of megabytes of heap growth or exhaust system memory, terminating a Node.js process and denying service to web, desktop, or mobile applications that parse untrusted images. The zero field widths are valid ISO-BMFF values indicating absent fields, so the vulnerable parser must bound work rather than relying on offset advancement. The issue is fixed in version 4.41.1. |
| Improper preservation of permissions in the Avast sandbox minifilter driver (aswSnx.sys) on Windows allows a local, low-privileged attacker executing inside the sandbox to escape file isolation and escalate to SYSTEM.
When the sandbox virtualizes a file it copies the original security descriptor, but the driver opened the virtualization target object with GENERIC_WRITE and FILE_WRITE_ATTRIBUTES only, omitting WRITE_DAC. Every attempt to apply the original DACL therefore failed, and the failure was discarded silently, leaving virtualized copies of sensitive files with permissive permissions. Because the IRP_MJ_CREATE callback additionally did not strip WRITE_DAC for sensitive directories, a sandboxed process could rewrite the security descriptor of a virtualized object, read the virtualized copy of the SAM database, extract local NTLM password hashes and execute code as SYSTEM.
The absence of an IRP_MJ_SET_SECURITY callback in the driver's operation registration table is a related defense-in-depth gap, but it is not the control that prevents this attack. |
| An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a particular sequence of crafted answers, and those answers arrive in a particular order with particular timing, the `named` resolver will encounter a use-after-free bug, and abort.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. |
| Missing authorization in Windows Remote Access Connection Manager allows an authorized attacker to perform tampering locally. |
| Triggering an error condition in certain MIME bodies would cause uninitialized memory to be used. This vulnerability was fixed in Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Incorrect authorization in SiteSettings in Google Chrome prior to 152.0.7977.75 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
