| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: acpi-notify: Check ACPI companion before use
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
san_probe() dereferences the result of ACPI_COMPANION() when installing
the GSBUS address space handler, so force-binding the driver to a device
without an ACPI companion leads to a NULL pointer dereference. The
dereference was introduced when the probe function was switched from
ACPI_HANDLE() to ACPI_COMPANION().
Check the ACPI companion against NULL and return -ENODEV when it is
missing, like commit e4865a56d013 ("ACPI: driver: Check ACPI_COMPANION()
against NULL during probe") does for the core ACPI platform drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: check endpoint DMA allocation
ast_udc_probe() allocates a coherent DMA buffer used as the backing store
for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer
pointers from udc->ep0_buf, so a failed allocation is dereferenced during
probe.
Check the allocation before endpoint setup. The existing probe error path
called ast_udc_remove(), which unregisters the gadget unconditionally and
is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup
helper for probe failures so pre-registration failures only unwind the
resources that were actually initialized.
This was found by a local static analysis checker for unchecked allocator
returns while scanning Linux 6.16. The change was checked by applying it
to current mainline and by running checkpatch. I do not have access to
Aspeed UDC hardware, so no runtime testing was performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdswap: Avoid freeing registered blktrans device twice
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again. Clear
the local pointer after deregistration so the common cleanup can still
release the mtdswap state without freeing the blktrans object twice.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove
Three issues arise when the device is removed while a tty session is
still active:
1. UAF of struct ipoctal: the remove callback frees ipoctal via
kfree() while tty ops may still access it. Fix by introducing
kref-based lifetime management — kref is taken in install() when
a tty is opened and released in cleanup() when the tty is finally
destroyed; remove() uses kref_put() instead of kfree().
2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove()
frees xmit_buf via tty_port_free_xmit_buf() while a userspace
process may still hold the tty fd and call write(). Fix by
checking for NULL xmit_buf in ipoctal_write_tty().
3. UAF in ipoctal_cleanup(): ipack_put_carrier(ipoctal->dev)
dereferences ipoctal->dev after the ipack_device has been freed
by ipack_device_del(). Fix by caching ipoctal->carrier_owner
during probe() and calling module_put() on the cached pointer
directly in cleanup(), avoiding any access to ipoctal->dev.
Also introduce a "removed" flag in struct ipoctal, set at the start
of __ipoctal_remove(), and checked in every tty op that accesses
hardware resources (port_activate, write_tty, set_termios, hangup,
shutdown). This prevents page faults when devm_ioremap() regions
are unmapped after remove() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in help_init(), and if it is not in the
[a–z] range the function returns an error to the caller. Eventually this
error is propagated to drivers/accessibility/speakup/main.c:2217, which
causes a bleep sound. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: Fix stale info pointer in failed registration path
After device_add(), the UIO device is visible to userspace and /dev/uioX
can be opened. If a later setup step fails, __uio_register_device()
unwinds the device but leaves idev->info pointing at the caller-owned
struct uio_info.
That is unsafe when an opener races with the failed registration path.
The open file keeps a reference to the uio_device, while the caller sees
registration failure and may free its struct uio_info. Later file
operations can then follow idev->info and dereference freed memory.
Handle post-device_add() failures like unregister: remove UIO attributes
while the info pointer is still valid, then clear idev->info under
info_lock and wake existing waiters/async users before removing the
device and minor. This makes already-open file descriptors observe the
same "device gone" state as normal uio_unregister_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
UDF symlink pathComponent header OOB read
udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header.
Validate that enough input remains for a complete pathComponent header
before accessing it. Reject malformed symlink data that would otherwise
make udf_pc_to_char() perform an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix task_struct reference leak in recover_worker
get_pid_task() increments the task reference count, but the
corresponding put_task_struct() was missing in the else branch,
leaking a reference on every GPU hang recovery.
Patchwork: https://patchwork.freedesktop.org/patch/730662/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: check SAP message length before reading it
Verify the SAP message size is not larger than the local buffer before
reading the message to avoid buffer overflow. |
