| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: Fix null-ptr-deref during unload module
The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.
[ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17
...
[ 677.882838] pc : destroy_workqueue+0x3c/0x770
[ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[ 677.884314] sp : ffff80008ad974f0
[ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[ 677.893977] Call trace:
[ 677.894297] destroy_workqueue+0x3c/0x770
[ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[ 677.895677] devm_action_release+0x50/0x90
[ 677.896211] release_nodes+0xe8/0x170
[ 677.896688] devres_release_all+0xf8/0x178
[ 677.897219] device_unbind_cleanup+0x24/0x170
[ 677.897785] device_release_driver_internal+0x35c/0x480
[ 677.898461] device_release_driver+0x20/0x38
...
[ 677.912665] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: change folios array from kmalloc to kvmalloc
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] <TASK>
[ 4080.879473] ? __alloc_pages+0x2c8/0x350
[ 4080.879475] ? __warn.cold+0x8e/0xe8
[ 4080.880647] ? __alloc_pages+0x2c8/0x350
[ 4080.880909] ? report_bug+0xff/0x140
[ 4080.881175] ? handle_bug+0x3c/0x80
[ 4080.881556] ? exc_invalid_op+0x17/0x70
[ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20
[ 4080.882077] ? udmabuf_create+0x131/0x400
Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB
memory, each array entry is pointer(8byte), so can save 524288 pages(2GB).
Further more, costly order(order 3) may not be guaranteed that it can be
applied for, due to fragmentation.
This patch change udmabuf array use kvmalloc_array, this can fallback
alloc into vmalloc, which can guarantee allocation for any size and does
not affect the performance of kmalloc allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: xlnx: zynqmp_disp: layer may be null while releasing
layer->info can be null if we have an error on the first layer in
zynqmp_disp_create_layers |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cw1200: Fix potential NULL dereference
A recent refactoring was identified by static analysis to
cause a potential NULL dereference, fix this! |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg()
kmalloc may fail, return value might be NULL and will cause
NULL pointer dereference. Add check NULL return of kmalloc in
btc_fw_set_monreg(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: adjust the position to init iso data anchor
MediaTek iso data anchor init should be moved to where MediaTek
claims iso data interface.
If there is an unexpected BT usb disconnect during setup flow,
it will cause a NULL pointer crash issue when releasing iso
anchor since the anchor wasn't been init yet. Adjust the position
to do iso data anchor init.
[ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168
[ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168
[ 17.137999] sp : ffffffc0890cb5f0
[ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80
[ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines
[ 17.148421] x27: 0000000000000000
[ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0
[ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001
[ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000
[ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000
[ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001
[ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001
[ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000
[ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011
[ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588
[ 17.268404] Call trace:
[ 17.270841] usb_kill_anchored_urbs+0x60/0x168
[ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)]
[ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)]
[ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)]
[ 17.300818] usb_unbind_interface+0xc4/0x240
[ 17.305079] device_release_driver_internal+0x18c/0x258
[ 17.310296] device_release_driver+0x1c/0x30
[ 17.314557] bus_remove_device+0x140/0x160
[ 17.318643] device_del+0x1c0/0x330
[ 17.322121] usb_disable_device+0x80/0x180
[ 17.326207] usb_disconnect+0xec/0x300
[ 17.329948] hub_quiesce+0x80/0xd0
[ 17.333339] hub_disconnect+0x44/0x190
[ 17.337078] usb_unbind_interface+0xc4/0x240
[ 17.341337] device_release_driver_internal+0x18c/0x258
[ 17.346551] device_release_driver+0x1c/0x30
[ 17.350810] usb_driver_release_interface+0x70/0x88
[ 17.355677] proc_ioctl+0x13c/0x228
[ 17.359157] proc_ioctl_default+0x50/0x80
[ 17.363155] usbdev_ioctl+0x830/0xd08
[ 17.366808] __arm64_sys_ioctl+0x94/0xd0
[ 17.370723] invoke_syscall+0x6c/0xf8
[ 17.374377] el0_svc_common+0x84/0xe0
[ 17.378030] do_el0_svc+0x20/0x30
[ 17.381334] el0_svc+0x34/0x60
[ 17.384382] el0t_64_sync_handler+0x88/0xf0
[ 17.388554] el0t_64_sync+0x180/0x188
[ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288)
[ 17.398289] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix file-backed mounts over FUSE
syzbot reported a null-ptr-deref in fuse_read_args_fill:
fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905
filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367
do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825
read_mapping_folio include/linux/pagemap.h:1011 [inline]
erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41
erofs_read_superblock fs/erofs/super.c:281 [inline]
erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625
Unlike most filesystems, some network filesystems and FUSE need
unavoidable valid `file` pointers for their read I/Os [1].
Anyway, those use cases need to be supported too.
[1] https://docs.kernel.org/filesystems/vfs.html |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe
This commit addresses a null pointer dereference issue in
dcn20_program_pipe(). Previously, commit 8e4ed3cf1642 ("drm/amd/display:
Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
partially fixed the null pointer dereference issue. However, in
dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and
plane_state is accessed again through pipe_ctx. Multiple if statements
directly call attributes of plane_state, leading to potential null
pointer dereference issues. This patch adds necessary null checks to
ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: imx-audmix: Add NULL check in imx_audmix_probe
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in imx_audmix_probe() is not checked.
Add NULL check in imx_audmix_probe(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: check return value of ieee80211_probereq_get() for RNR
The return value of ieee80211_probereq_get() might be NULL, so check it
before using to avoid NULL pointer access.
Addresses-Coverity-ID: 1529805 ("Dereference null return value") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Don't attempt to resume the ports before they exist
This will fix null pointer dereference that was caused by
the driver attempting to resume ports that were not yet
registered. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Store vhost pointer during subcrq allocation
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.
This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().
Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc] |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Latest kernel will explode on the PHY interrupt config, since it depends
now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
...
Call Trace:
[<8050e8a8>] at803x_config_intr+0x5c/0xd0
[<80504b34>] phy_request_interrupt+0xa8/0xd0
[<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
[<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
[<8074d8ec>] dsa_slave_create+0x270/0x420
[<80743b04>] dsa_port_setup+0x12c/0x148
[<8074580c>] dsa_register_switch+0xaf0/0xcc0
[<80511344>] ar9331_sw_probe+0x370/0x388
[<8050cb78>] mdio_probe+0x44/0x70
[<804df300>] really_probe+0x200/0x424
[<804df7b4>] __driver_probe_device+0x290/0x298
[<804df810>] driver_probe_device+0x54/0xe4
[<804dfd50>] __device_attach_driver+0xe4/0x130
[<804dcb00>] bus_for_each_drv+0xb4/0xd8
[<804dfac4>] __device_attach+0x104/0x1a4
[<804ddd24>] bus_probe_device+0x48/0xc4
[<804deb44>] deferred_probe_work_func+0xf0/0x10c
[<800a0ffc>] process_one_work+0x314/0x4d4
[<800a17fc>] worker_thread+0x2a4/0x354
[<800a9a54>] kthread+0x134/0x13c
[<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
too. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.
This can lead to crashes:
[40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246
[40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7
[40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8
[40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008
[40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708
[40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0
[40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]
Fix that by stopping the loop in case the rx queue becomes empty. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
pdesc could be null but still dereference pdesc->name and it will lead to
a null pointer access. So we move a null check before dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: ralink: Check for null return of devm_kcalloc
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.". |
| In the Linux kernel, the following vulnerability has been resolved:
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
In case a IRQ based transfer times out the bcm2835_spi_handle_err()
function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop
dma_pending flag") the TX and RX DMA transfers are unconditionally
canceled, leading to NULL pointer derefs if ctlr->dma_tx or
ctlr->dma_rx are not set.
Fix the NULL pointer deref by checking that ctlr->dma_tx and
ctlr->dma_rx are valid pointers before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't null dereference ops->destroy
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then. |
