| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix TOCTOU race in luo_session_retrieve()
Extend the scope of the rwsem_read lock in luo_session_retrieve() to
overlap with the acquisition of the session mutex. This prevents a
concurrent thread from releasing and freeing the session between the
lookup and the mutex lock. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Don't move a peeked OOB message onto the pending queue
rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and,
if a response is needed, moves it onto the pending_oobq tree. However,
only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto
pending_oobq always runs.
As a result, reading a challenge with MSG_PEEK leaves the skb on
recvmsg_oobq while also adding it to pending_oobq. Since struct
sk_buff's rbnode shares storage with its next and prev pointers,
rb_insert_color() overwrites the list linkage, and the skb, which holds
a single reference, becomes reachable from both queues at once.
When the socket is closed both queues are drained in turn. While
draining recvmsg_oobq, __skb_unlink() follows the next and prev
pointers that rbnode has overwritten and writes to a bad address. Also,
as the skb holds a single reference but is freed from each queue, both
the skb and the connection reference it holds are released twice. This
leads to memory corruption and to a use-after-free caused by the
connection refcount underflow.
MSG_PEEK does not consume the message from the queue, so only unlink it
from recvmsg_oobq and then move it onto pending_oobq or free it when
the message is actually consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix list corruption in allocate_file_region_entries()
allocate_file_region_entries() tops up resv->region_cache with freshly
allocated file_region descriptors. The allocation uses GFP_KERNEL, so
resv->lock is dropped around it: the new entries are gathered on a
stack-local list head, allocated_regions, and spliced into
resv->region_cache once the lock is re-acquired.
The splice used list_splice(), which moves the entries but does not
re-initialize the source head, so allocated_regions is left pointing at an
entry that now lives on resv->region_cache. The top-up runs in a while
loop that re-checks the cache deficit after re-acquiring the lock. For a
shared mapping the resv_map is shared by every mapper of the hugetlbfs
inode, so a concurrent region_chg()/region_add()/region_del() on the same
resv_map can consume cache entries during the unlocked window and force a
second iteration. That iteration calls list_add() on the stale head and
corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check
trips:
list_add corruption. next->prev should be prev (ffffc900011ff7f8),
but was ffff88814c281460. (next=ffff88814c545640).
kernel BUG at lib/list_debug.c:31!
allocate_file_region_entries+0x191/0x420
region_chg+0x267/0x300
hugetlb_reserve_pages+0x387/0xc80
hugetlbfs_file_mmap+0x2ce/0x3f0
mmap_region+0x1348/0x1a80
do_mmap+0x85e/0xb90
vm_mmap_pgoff+0x18c/0x330
ksys_mmap_pgoff+0x2a1/0x3e0
do_syscall_64+0xd7/0x420
Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack
address into resv->region_cache, leading to later use-after-free.
This was observed as a real host panic on a dense KVM host where a QEMU
guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate
SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one
shared resv_map.
Use list_splice_init() so the source head is re-initialized empty after
each splice, making the retry loop safe. |
| The Pods – Custom Content Types and Fields plugin for WordPress is vulnerable to Privilege Escalation via Authorization Bypass in all versions up to, and including, 3.3.9. The vulnerability exists because the pods_admin AJAX router funnels every access check — including the method allowlist, nonce verification, login enforcement, and capability gate — through pods_error(), which under the JSON meta-box-loader compatibility path only writes failures to the PHP error log and returns false instead of terminating the request, rendering all guards ineffective. This makes it possible for unauthenticated attackers to escalate their privileges to Administrator or overwrite the password of any user account, including the site owner's, enabling complete site takeover, or perform another administrator action. |
| A security flaw has been discovered in LB-LINK X-PRO 1.0.22-20231206. This affects an unknown function of the file /etc/config/easycwmp. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitability is reported as difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq(). |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)
When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535).
This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535.
However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel.
If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will
be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer
dereference because local TCP packets do not use frag_list.
Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from
ip6_default_advmss() when MTU is large.
Also update the stale comment in ip6_default_advmss() which suggested
that IPV6_MAXPLEN is returned to mean "any MSS". |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever dualpi2 drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though dualpi2 still has 1 packet on the queue and, thus,
mistakenly deactivates the parent's class which leads to a null-ptr-deref:
[ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full)
[ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq
[ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
All code
[ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216
[ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0
[ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523
[ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000
[ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000
[ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000
[ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0
[ 101.431320][ T599] PKRU: 55555554
[ 101.431433][ T599] Call Trace:
[ 101.431544][ T599] <TASK>
[ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445)
[ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22))
[ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for
accessing p->targets[]. However, cxled->pos can be set to negative errno
in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This
causes the driver to use a negative index to access p->targets[],
resulting in out-of-bounds access.
Fix it by walking p->targets[] instead of using cxled->pos directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fib_rules: Don't dump dying fib_rule in fib_rules_dump().
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't dump dying fib_info in fib_leaf_notify().
syzbot reported use-after-free in nsim_fib4_prepare_event(). [0]
The problem is that the following functions call fib_info_hold() /
refcount_inc() while dumping fib_info under RCU, which is unsafe.
* mlxsw_sp_router_fib4_event()
* rocker_router_fib_event()
* nsim_fib4_prepare_event()
refcount_inc_not_zero() must be used, but it would be too late
there.
Let's guarantee the lifetime of fib_info in fib_leaf_notify().
Note that IPv6 does not need the corresponding change since
fib6_table_dump() holds fib6_table.tb6_lock.
[0]:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420
Modules linked in:
CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Workqueue: netns cleanup_net
RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25
Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f
RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293
RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0
RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000
R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000
FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
fib_info_hold include/net/ip_fib.h:629 [inline]
nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline]
nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline]
nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043
call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25
call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline]
fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline]
fib_table_notify net/ipv4/fib_trie.c:2194 [inline]
fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217
fib_net_dump net/core/fib_notifier.c:70 [inline]
register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108
nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline]
nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058
devlink_reload+0x501/0x8d0 net/devlink/dev.c:475
devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558
ops_pre_exit_list net/core/net_namespace.c:161 [inline]
ops_undo_list+0x187/0x940 net/core/net_namespace.c:234
cleanup_net+0x56e/0x800 net/core/net_namespace.c:702
process_one_work kernel/workqueue.c:3314 [inline]
process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-legacy: Bound DAI link iteration
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: link kn to its parent before the LSM init hook
After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"),
kernfs_xattr_set() and kernfs_xattr_get() compute the cache via
kernfs_root(kn) before any other check. kernfs_root(kn) walks
kn->__parent first and falls back to kn->dir.root, both of which are
NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set
in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root
is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir().
The LSM kernfs_init_security hook is invoked from inside
__kernfs_new_node(), before either field has been initialized.
selinux_kernfs_init_security() ends with kernfs_xattr_set(kn,
XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and
&((struct kernfs_root *)NULL)->xa_cache evaluates to
offsetof(struct kernfs_root, xa_cache) which faults:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
RIP: 0010:simple_xattr_set+0x27/0x8b0
Call Trace:
kernfs_xattr_set+0x63/0xb0
selinux_kernfs_init_security+0x13b/0x270
security_kernfs_init_security+0x36/0xc0
__kernfs_new_node+0x182/0x290
kernfs_new_node+0x80/0xc0
kernfs_create_dir_ns+0x2b/0xa0
cgroup_create+0x116/0x380
cgroup_mkdir+0x7c/0x1a0
Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled
distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled
parent panics the kernel.
The LSM hook's contract is that the kn_dir argument is the parent of
the new kn, so kn->__parent should already point at kn_dir when the
hook runs. Move kernfs_get(parent) and rcu_assign_pointer of
kn->__parent from kernfs_new_node() into __kernfs_new_node() right
before the security hook, and unwind the parent reference on the
err_out4 path. kernfs_root(kn) then takes its parent branch during
the hook and returns parent->dir.root, which is the correct root.
This also closes the same-shape latent bug in kernfs_xattr_get() (which
today is hidden only by kernfs_iattrs_noalloc() returning NULL on a
fresh kn). |
