| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In battery, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11276677; Issue ID: MSV-9217. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the wrong target SID after one.
Copy the saved user SID when user_file is a backing file. Keep using the
regular file SID for the first backing layer.
With two nested overlayfs mounts and SELinux enforcing,
mprotect(PROT_READ) returns EACCES with an fd { use } denial against the
mounter SID. With this change, mprotect() succeeds.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy. The original test was also repeated with Fedora Cloud
Base 44 userspace and gave the same result. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix the PIO_CRED credit-return mmap
hfi1_file_mmap()'s PIO_CRED case must hand user space the single
credit-return page that holds this context's entry. That page is the
second or third page of the per-node credit-return allocation once the
hardware send context index reaches 64 or 128, so the failure below is
intermittent: when the entry lands on the first page the offset is zero
and everything works.
Two things are wrong.
First, cr_page_offset is a byte offset but .va is a struct
credit_return *, so adding it is pointer arithmetic and scales the offset
by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or
512 KiB past a 10240-byte allocation. With an IOMMU translating, that
address is inside the vmalloc range but in no vm_area, so
dma_mmap_coherent() -> iommu_dma_mmap() finds no pages, vmalloc_to_pfn()
returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above
MAXPHYADDR. The first user read then takes:
psm2_ep_open_pr: Corrupted page table at address 7a14d007e000
PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067
PTE 800049168e911235
Oops: Bad pagetable: 000d [#1] SMP PTI
Second, and still wrong once the arithmetic is corrected,
dma_mmap_coherent() describes a whole coherent buffer and selects the
page within it with vma->vm_pgoff. Offsetting cpu_addr has no effect:
for a vmap'd allocation iommu_dma_mmap() uses cpu_addr only to locate the
vm_area and then maps pages[vm_pgoff], which hfi1_file_mmap() has just
set to 0. User space therefore always receives the first credit-return
page, every credit read is for the wrong context, and send PIO stalls
forever.
Use the DMA API as intended: pass the base of the allocation with its
full length and select the page with vm_pgoff. A separate length is
needed because memlen must keep describing the VMA for the existing size
check. The dma-direct path stays correct as well, since dma_direct_mmap()
adds the same vm_pgoff to the base pfn.
Tested on a Dell T7610 (Xeon E5-2650 v2, Intel IOMMU in DMA-FQ mode)
against a Threadripper PRO 3995WX peer, both Omni-Path 100. Before this
change psm2_ep_open() Oopses the kernel; with only the arithmetic
corrected psm2_ep_open() succeeds but any transfer that uses send PIO
hangs, PSM2_SDMA=2 (send PIO disabled) completing normally while
PSM2_SDMA=0 (send PIO only) hangs every time. With this change send PIO,
send DMA and the default mixed mode all work. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11292777; Issue ID: MSV-9195. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in wp-post-author.
This issue affects wp-post-author version 4.0.0 prior to 4.1.0. |
| lwIP SMTP client does not check the size of inputs, potentially allowing a buffer overflow. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in wp-post-author.
This issue affects wp-post-author before 4.1.0. |
| In apu, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249016; Issue ID: MSV-9169. |
| In apu, there is a possible application crash due to double free. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249024; Issue ID: MSV-9168. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: spi: reset bytes_xfered before retrying CRC failures
mmc_spi_data_do() updates data->bytes_xfered after each block has been
transferred successfully. If a later block in the same data request
fails with a CRC error, data->bytes_xfered may therefore contain the
number of bytes completed before the failing block.
mmc_spi_request() has a private recovery path for such CRC failures. It
sends STOP_TRANSMISSION, clears data->error and jumps back to
crc_recover to issue the same command and data request again. However,
it does not clear data->bytes_xfered before the retry.
If the retry succeeds, the request is completed with the bytes from the
failed attempt still included in data->bytes_xfered. For a multi-block
request this can make the completed request report more bytes than were
transferred by the successful retry, and can even exceed the request size
when most blocks completed before the CRC error.
This is most likely to be observed on MMC-over-SPI systems where long
multi-block transfers occasionally hit a data CRC error but the
mmc_spi-internal retry succeeds. The data itself is retried, but the
completion accounting is not.
Clear data->bytes_xfered together with data->error before repeating the
request so the final completion reports only the bytes transferred by the
successful attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mxcmmc: cancel data work and watchdog on remove
mxcmci_remove() frees the host through the devm tail, but neither it nor
mmc_remove_host() drains the driver's own asynchronous state.
host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(),
is deleted only by the DMA- and IRQ-complete paths, which the remove path
does not explicitly drain; it can therefore fire after the host is freed
and dereference it in mxcmci_watchdog(). host->datawork, armed from the
IRQ handler on the PIO path, is not cancelled by the remove path either.
Free the devm-registered IRQ, then cancel datawork and delete the watchdog
in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first
keeps a trailing handler from re-arming datawork between the cancel and
the host free. Both callbacks are non-self-rearming.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy. |
| A malicious user with physical access to the device can boot the switch from factory settings without authentication, use the default administrative credentials to obtain administrative access, and save changes to the configuration file so that they persist next time the switch boots normally. |
| Apache Struts 2.3.19 to 2.3.20.2, 2.3.21 to 2.3.24.1, and 2.3.25 to 2.3.28, when Dynamic Method Invocation is enabled, allow remote attackers to execute arbitrary code via method: prefix, related to chained expressions. |
| Navigating to a certain URL on the switch’s web server causes the switch to reboot. This can be automated using a tool like curl to create DoS conditions where the switch constantly reboots. |
