| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the SSL file policy implementation of Cisco Firepower Threat Defense (FTD) Software that occurs when the SSL/TLS connection is configured with a URL Category and the Snort 3 detection engine could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to unexpectedly restart. This vulnerability exists because a logic error occurs when a Snort 3 detection engine inspects an SSL/TLS connection that has either a URL Category configured on the SSL file policy or a URL Category configured on an access control policy with TLS server identity discovery enabled. Under specific, time-based constraints, an attacker could exploit this vulnerability by sending a crafted SSL/TLS connection through an affected device. A successful exploit could allow the attacker to trigger an unexpected reload of the Snort 3 detection engine, resulting in either a bypass or denial of service (DoS) condition, depending on device configuration. The Snort 3 detection engine will restart automatically. No manual intervention is required. |
| A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
| A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition. |
| A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile. |
| A vulnerability in the TCP syslog module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust the 1550-byte buffers on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing boundary check in an internal function. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between an affected device and its configured TCP syslog server and then maliciously modifying the TCP header in segments that are sent from the syslog server to the affected device. A successful exploit could allow the attacker to exhaust buffer on the affected device and cause all TCP-based features to stop functioning, resulting in a DoS condition. The affected TCP-based features include AnyConnect SSL VPN, clientless SSL VPN, and management connections such as Secure Shell (SSH), Telnet, and HTTPS. |
| A vulnerability in the Session Initiation Protocol (SIP) inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload or trigger high CPU, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of SIP traffic. An attacker could exploit this vulnerability by sending SIP requests designed to specifically trigger this issue at a high rate across an affected device. Software updates that address this vulnerability are not yet available. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 single sign-on (SSO) for remote access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to intercept the SAML assertion of a user who is authenticating to a remote access VPN session. This vulnerability is due to insufficient validation of the login URL. An attacker could exploit this vulnerability by persuading a user to access a site that is under the control of the attacker, allowing the attacker to modify the login URL. A successful exploit could allow the attacker to intercept a successful SAML assertion and use that assertion to establish a remote access VPN session toward the affected device with the identity and permissions of the hijacked user, resulting in access to the protected network. |
| A vulnerability in the IP geolocation rules of Snort 3 could allow an unauthenticated, remote attacker to potentially bypass IP address restrictions. This vulnerability exists because the configuration for IP geolocation rules is not parsed properly. An attacker could exploit this vulnerability by spoofing an IP address until they bypass the restriction. A successful exploit could allow the attacker to bypass location-based IP address restrictions. |
| Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects. |
| A vulnerability in the interaction between the Server Message Block (SMB) protocol preprocessor and the Snort 3 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error-checking when the Snort 3 detection engine is processing SMB traffic. An attacker could exploit this vulnerability by sending a crafted SMB packet stream through an affected device. A successful exploit could allow the attacker to cause the Snort process to reload, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. |
| Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection.
This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer use-after-free read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to unexpectedly restart the Snort 3 Detection Engine, which could cause a denial of service (DoS). |
| Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection.
This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer out-of-bounds read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to obtain sensitive information in the Snort 3 data stream. |
| A vulnerability in the CLI of Cisco Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device.
This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for a specific CLI command. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| A vulnerability in the sftunnel functionality of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with administrative privileges to write arbitrary files as root on the underlying operating system.
This vulnerability is due to insufficient validation of the directory path during file synchronization. An attacker could exploit this vulnerability by crafting a directory path outside of the expected file location. A successful exploit could allow the attacker to create or replace any file on the underlying operating system. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the disclosure of possible sensitive data or cause the Snort 3 Detection Engine to crash.
This vulnerability is due to an error in the logic of buffer handling when the MIME fields of the HTTP header are parsed. This can result in a buffer under-read. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to induce one of two possible outcomes: the unexpected restarting of the Snort 3 Detection Engine, which could cause a denial of service (DoS) condition, or information disclosure of sensitive information in the Snort 3 data stream. Due to the under-read condition, it is possible that sensitive information that is not valid connection data could be returned. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a lack of complete error checking when the MIME fields of the HTTP header are parsed. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
