| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()
In resp_mode_select() sanity check the block descriptor len to avoid UAF.
BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032
CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
<TASK>
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Put LLD module refcnt after SCSI device is released
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.
Make sure to put LLD module refcnt after SCSI device is released.
Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: destroy cm id before destroy qp to avoid use after free
We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: iphase: fix possible use-after-free in ia_module_exit()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: fix possible use-after-free in HFC_cleanup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
misc/libmasm/module: Fix two use after free in ibmasm_init_one
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: Fix possible use-after-free in wdt_startup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: Fix possible use-after-free by calling del_timer_sync()
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix use-after-free read in drm_getunique()
There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.
An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.
To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
An error is detected with the following report when unloading the driver:
"KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b"
The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the
flag is not cleared upon completion of the login.
This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set
to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used
as an rpi_ids array index.
Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in
lpfc_mbx_cmpl_fc_reg_login(). |
| In bdi_put and bdi_unregister of backing-dev.c, there is a possible memory corruption due to a use after free. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-182815710References: Upstream kernel |
| Microsoft Office Remote Code Execution Vulnerability |
| Microsoft Streaming Service Elevation of Privilege Vulnerability |
| Windows Win32 Kernel Subsystem Elevation of Privilege Vulnerability |
| Windows Standards-Based Storage Management Service Remote Code Execution Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341
CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 5987:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252
mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279
remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x548/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5989:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x18e/0x440 mm/slub.c:4841
mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242
mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
__sys_bind_socket net/socket.c:1810 [inline]
__sys_bind+0x2c3/0x3e0 net/socket.c:1841
__do_sys_bind net/socket.c:1846 [inline]
__se_sys_bind net/socket.c:1844 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1844
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: prevent deactivate active config while enabling the config
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek. |
