| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A logic issue was addressed with improved restrictions. This issue is fixed in iOS 13.4 and iPadOS 13.4, tvOS 13.4, Safari 13.1, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. A download's origin may be incorrectly associated. |
| An inconsistent user interface issue was addressed with improved state management. This issue is fixed in Safari 13.0.5. Visiting a malicious website may lead to address bar spoofing. |
| u'Use out of range pointer issue can occur due to incorrect buffer range check during the execution of qseecom' in Snapdragon Auto, Snapdragon Compute, Snapdragon Mobile, Snapdragon Voice & Music in Bitra, Nicobar, Saipan, SM6150, SM8150, SM8250, SXR2130 |
| u'Due to an incorrect SMMU configuration, the modem crypto engine can potentially compromise the hypervisor' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in Agatti, Bitra, Kamorta, Nicobar, QCA6390, QCS404, QCS605, QCS610, Rennell, SA415M, SA515M, SA6155P, SA8155P, Saipan, SC7180, SC8180X, SDA845, SDM670, SDM710, SDM845, SDM850, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130 |
| u'QSEE reads the access permission policy for the SMEM TOC partition from the SMEM TOC contents populated by XBL Loader and applies them without validation' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in Agatti, APQ8009, APQ8098, Bitra, IPQ6018, Kamorta, MDM9150, MDM9205, MDM9206, MDM9607, MDM9650, MSM8905, MSM8998, Nicobar, QCA6390, QCS404, QCS405, QCS605, QCS610, Rennell, SA415M, SA515M, SA6155P, SA8155P, Saipan, SC7180, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130 |
| u'Out of bound writes happen when accessing usage_table header entry beyond the memory allocated for the header' in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in Kamorta, QCS404, QCS610, Rennell, SC7180, SDX55, SM6150, SM7150, SM8250, SXR2130 |
| A vulnerability in the TCP packet processing functionality of Cisco IP Phones could allow an unauthenticated, remote attacker to cause the phone to stop responding to incoming calls, drop connected calls, or unexpectedly reload. The vulnerability is due to insufficient TCP ingress packet rate limiting. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the targeted device. A successful exploit could allow the attacker to impact operations of the phone or cause the phone to reload, leading to a denial of service (DoS) condition. |
| Multiple vulnerabilities in the secure boot process of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software for the Firepower 1000 Series and Firepower 2100 Series Appliances could allow an authenticated, local attacker to bypass the secure boot mechanism. The vulnerabilities are due to insufficient protections of the secure boot process. An attacker could exploit these vulnerabilities by injecting code into specific files that are then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device, which would be executed at each boot and maintain persistence across reboots. |
| A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots. |
| A vulnerability in Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9800 Series Routers could allow an unauthenticated, adjacent attacker to send ICMPv6 traffic prior to the client being placed into RUN state. The vulnerability is due to an incomplete access control list (ACL) being applied prior to RUN state. An attacker could exploit this vulnerability by connecting to the associated service set identifier (SSID) and sending ICMPv6 traffic. A successful exploit could allow the attacker to send ICMPv6 traffic prior to RUN state. |
| A vulnerability in specific REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system with the privileges of the logged-in user. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to inject arbitrary commands on the underlying operating system. |
| A vulnerability in the deep packet inspection (DPI) engine of Cisco SD-WAN vEdge Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of FTP traffic. An attacker could exploit this vulnerability by sending crafted FTP packets through an affected device. A successful exploit could allow the attacker to make the device reboot continuously, causing a DoS condition. |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access hidden commands. The vulnerability is due to the presence of undocumented configuration commands. An attacker could exploit this vulnerability by performing specific steps that make the hidden commands accessible. A successful exploit could allow the attacker to make configuration changes to various sections of an affected device that should not be exposed to CLI access. |
| A vulnerability in role-based access control of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow a read-only authenticated, remote attacker to disable user accounts on an affected system. The vulnerability is due to incorrect allocation of the enable/disable action button under the role-based access control code on an affected system. An attacker could exploit this vulnerability by authenticating as a read-only user and then updating the roles of other users to disable them. A successful exploit could allow the attacker to disable users, including administrative users. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured File Policy for HTTP. The vulnerability is due to incorrect detection of modified HTTP packets used in chunked responses. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured File Policy for HTTP packets and deliver a malicious payload. |
| A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped. |
| Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device. |
| A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass access control restrictions on an affected device. The vulnerability is due to the presence of a proxy service at a specific endpoint of the web UI. An attacker could exploit this vulnerability by connecting to the proxy service. An exploit could allow the attacker to bypass access restrictions on the network by proxying their access request through the management network of the affected device. As the proxy is reached over the management virtual routing and forwarding (VRF), this could reduce the effectiveness of the bypass. |
| A vulnerability in the image verification feature of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) could allow an authenticated, local attacker to boot a malicious software image on an affected device. The vulnerability is due to insufficient access restrictions on the area of code that manages the image verification feature. An attacker could exploit this vulnerability by first authenticating to the targeted device and then logging in to the Virtual Device Server (VDS) of an affected device. The attacker could then, from the VDS shell, disable Cisco IOS Software integrity (image) verification. A successful exploit could allow the attacker to boot a malicious Cisco IOS Software image on the targeted device. To exploit this vulnerability, the attacker must have valid user credentials at privilege level 15. |
