Junos OS: SRX 5000 Series: Upon processing of a specific SIP packet an FPC can crash

An Improper Validation of Array Index vulnerability in the SIP ALG of Juniper Networks Junos OS on SRX 5000 Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an attacker sends an SIP packets with a malformed SDP field then the SIP ALG can not process it which will lead to an FPC crash and restart. Continued receipt of these specific packets will lead to a sustained Denial of Service. This issue can only occur when both below mentioned conditions are fulfilled: 1. Call distribution needs to be enabled: [security alg sip enable-call-distribution] 2. The SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. To confirm whether SIP ALG is enabled on SRX, and MX with SPC3 use the following command: user@host> show security alg status | match sip SIP : Enabled This issue affects Juniper Networks Junos OS on SRX 5000 Series: 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R1-S1, 22.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

Junos OS: SRX Series, MX Series with SPC3: When an inconsistent NAT configuration exists and a specific CLI command is issued the SPC will reboot

An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent "deterministic NAT" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.

Junos OS: MX Series with MPC10/MPC11: When Suspicious Control Flow Detection (scfd) is enabled and an attacker is sending specific traffic, this causes a memory leak.

A Missing Release of Memory after Effective Lifetime vulnerability in the Juniper Networks Junos OS on MX Series platforms with MPC10/MPC11 line cards, allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). Devices are only vulnerable when the Suspicious Control Flow Detection (scfd) feature is enabled. Upon enabling this specific feature, an attacker sending specific traffic is causing memory to be allocated dynamically and it is not freed. Memory is not freed even after deactivating this feature. Sustained processing of such traffic will eventually lead to an out of memory condition that prevents all services from continuing to function, and requires a manual restart to recover. The FPC memory usage can be monitored using the CLI command "show chassis fpc". On running the above command, the memory of AftDdosScfdFlow can be observed to detect the memory leak. This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 20.2R3-S5; 20.3 version 20.3R1 and later versions.

Junos OS: SRX Series: The flow processing daemon (flowd) will crash when Unified Policies are used with IPv6 and certain dynamic applications are rejected by the device

An Out-of-Bounds Write vulnerability in Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On SRX Series devices using Unified Policies with IPv6, when a specific IPv6 packet goes through a dynamic-application filter which will generate an ICMP deny message, the flowd core is observed and the PFE is restarted. This issue affects: Juniper Networks Junos OS on SRX Series: 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R3-S9; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2.

Junos OS: MX Series and SRX Series: The flow processing daemon (flowd) will crash if the SIP ALG is enabled and specific SIP messages are processed

An Improper Locking vulnerability in the SIP ALG of Juniper Networks Junos OS on MX Series with MS-MPC or MS-MIC card and SRX Series allows an unauthenticated, network-based attacker to cause a flow processing daemon (flowd) crash and thereby a Denial of Service (DoS). Continued receipt of these specific packets will cause a sustained Denial of Service condition. This issue occurs when SIP ALG is enabled and specific SIP messages are processed simultaneously. This issue affects: Juniper Networks Junos OS on MX Series and SRX Series 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1 on MX Series, or SRX Series.

Junos OS: MX Series: The Multiservices PIC Management Daemon (mspmand) will crash when an IPsec6 tunnel processes specific IPv4 packets

An Improper Check or Handling of Exceptional Conditions vulnerability in the IPsec library of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause Denial of Service (DoS). On all MX platforms with MS-MPC or MS-MIC card, when specific IPv4 packets are processed by an IPsec6 tunnel, the Multiservices PIC Management Daemon (mspmand) process will core and restart. This will lead to FPC crash. Traffic flow is impacted while mspmand restarts. Continued receipt of these specific packets will cause a sustained Denial of Service (DoS) condition. This issue only occurs if an IPv4 address is not configured on the multiservice interface. This issue affects: Juniper Networks Junos OS on MX Series All versions prior to 19.4R3-S9; 20.1 version 20.1R3-S5 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2.

NVIDIA BMC contains a vulnerability in IPMI handler, where an authorized attacker can cause a buffer overflow and cause a denial of service or gain code execution.

NVIDIA BMC IPMI handler allows an unauthenticated host to write to a host SPI flash bypassing secureboot protections. This may lead to a loss of integrity and denial of service.

NVIDIA DGX A100 contains a vulnerability in SBIOS in the SmiFlash, where a local user with elevated privileges can read, write and erase flash, which may lead to code execution, escalation of privileges, denial of service, and information disclosure. The scope of impact can extend to other components.

NVIDIA DGX Station contains a vulnerability in SBIOS in the SmiFlash, where a local user with elevated privileges can read, write and erase flash, which may lead to code execution, escalation of privileges, denial of service, and information disclosure. The scope of impact can extend to other components.

NVIDIA BMC contains a vulnerability in SPX REST API, where an authorized attacker can read and write to arbitrary locations within the memory context of the IPMI server process, which may lead to code execution, denial of service, information disclosure and data tampering.

Weak Password Requirements in thorsten/phpmyfaq

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

Cross-site Scripting (XSS) - Stored in thorsten/phpmyfaq

Cross-site Scripting (XSS) - Stored in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

Cross-site Scripting (XSS) - Stored in thorsten/phpmyfaq

Cross-site Scripting (XSS) - Stored in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

Cross-site Scripting (XSS) - Stored in thorsten/phpmyfaq

Cross-site Scripting (XSS) - Stored in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

Improper Authentication in thorsten/phpmyfaq

Improper Authentication in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

Phpgurukul's Beauty Parlour Management System v1.1 is vulnerable to SQL Injection in `login.php` via the `emailcont` parameter.

Cross-site Scripting (XSS) - Stored in thorsten/phpmyfaq

Cross-site Scripting (XSS) - Stored in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

code-projects Online Class and Exam Scheduling System teacher_save.php sql injection

A vulnerability was found in code-projects Online Class and Exam Scheduling System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /pages/teacher_save.php. The manipulation of the argument salut leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

Cross-site Scripting (XSS) - Stored in thorsten/phpmyfaq

Cross-site Scripting (XSS) - Stored in GitHub repository thorsten/phpmyfaq prior to 3.1.10.