Filtered by vendor Xen
Subscriptions
Filtered by product Xen
Subscriptions
Total
466 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2018-15471 | 3 Canonical, Linux, Xen | 3 Ubuntu Linux, Linux Kernel, Xen | 2024-08-05 | 7.8 High |
| An issue was discovered in xenvif_set_hash_mapping in drivers/net/xen-netback/hash.c in the Linux kernel through 4.18.1, as used in Xen through 4.11.x and other products. The Linux netback driver allows frontends to control mapping of requests to request queues. When processing a request to set or change this mapping, some input validation (e.g., for an integer overflow) was missing or flawed, leading to OOB access in hash handling. A malicious or buggy frontend may cause the (usually privileged) backend to make out of bounds memory accesses, potentially resulting in one or more of privilege escalation, Denial of Service (DoS), or information leaks. | ||||
| CVE-2018-15468 | 1 Xen | 1 Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.11.x. The DEBUGCTL MSR contains several debugging features, some of which virtualise cleanly, but some do not. In particular, Branch Trace Store is not virtualised by the processor, and software has to be careful to configure it suitably not to lock up the core. As a result, it must only be available to fully trusted guests. Unfortunately, in the case that vPMU is disabled, all value checking was skipped, allowing the guest to choose any MSR_DEBUGCTL setting it likes. A malicious or buggy guest administrator (on Intel x86 HVM or PVH) can lock up the entire host, causing a Denial of Service. | ||||
| CVE-2018-14678 | 4 Canonical, Debian, Linux and 1 more | 4 Ubuntu Linux, Debian Linux, Linux Kernel and 1 more | 2024-08-05 | 7.8 High |
| An issue was discovered in the Linux kernel through 4.17.11, as used in Xen through 4.11.x. The xen_failsafe_callback entry point in arch/x86/entry/entry_64.S does not properly maintain RBX, which allows local users to cause a denial of service (uninitialized memory usage and system crash). Within Xen, 64-bit x86 PV Linux guest OS users can trigger a guest OS crash or possibly gain privileges. | ||||
| CVE-2018-12891 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x. Certain PV MMU operations may take a long time to process. For that reason Xen explicitly checks for the need to preempt the current vCPU at certain points. A few rarely taken code paths did bypass such checks. By suitably enforcing the conditions through its own page table contents, a malicious guest may cause such bypasses to be used for an unbounded number of iterations. A malicious or buggy PV guest may cause a Denial of Service (DoS) affecting the entire host. Specifically, it may prevent use of a physical CPU for an indeterminate period of time. All Xen versions from 3.4 onwards are vulnerable. Xen versions 3.3 and earlier are vulnerable to an even wider class of attacks, due to them lacking preemption checks altogether in the affected code paths. Only x86 systems are affected. ARM systems are not affected. Only multi-vCPU x86 PV guests can leverage the vulnerability. x86 HVM or PVH guests as well as x86 single-vCPU PV ones cannot leverage the vulnerability. | ||||
| CVE-2018-12893 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x. One of the fixes in XSA-260 added some safety checks to help prevent Xen livelocking with debug exceptions. Unfortunately, due to an oversight, at least one of these safety checks can be triggered by a guest. A malicious PV guest can crash Xen, leading to a Denial of Service. All Xen systems which have applied the XSA-260 fix are vulnerable. Only x86 systems are vulnerable. ARM systems are not vulnerable. Only x86 PV guests can exploit the vulnerability. x86 HVM and PVH guests cannot exploit the vulnerability. An attacker needs to be able to control hardware debugging facilities to exploit the vulnerability, but such permissions are typically available to unprivileged users. | ||||
| CVE-2018-12892 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen 4.7 through 4.10.x. libxl fails to pass the readonly flag to qemu when setting up a SCSI disk, due to what was probably an erroneous merge conflict resolution. Malicious guest administrators or (in some situations) users may be able to write to supposedly read-only disk images. Only emulated SCSI disks (specified as "sd" in the libxl disk configuration, or an equivalent) are affected. IDE disks ("hd") are not affected (because attempts to make them readonly are rejected). Additionally, CDROM devices (that is, devices specified to be presented to the guest as CDROMs, regardless of the nature of the backing storage on the host) are not affected; they are always read only. Only systems using qemu-xen (rather than qemu-xen-traditional) as the device model version are vulnerable. Only systems using libxl or libxl-based toolstacks are vulnerable. (This includes xl, and libvirt with the libxl driver.) The vulnerability is present in Xen versions 4.7 and later. (In earlier versions, provided that the patch for XSA-142 has been applied, attempts to create read only disks are rejected.) If the host and guest together usually support PVHVM, the issue is exploitable only if the malicious guest administrator has control of the guest kernel or guest kernel command line. | ||||
| CVE-2018-10982 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing x86 HVM guest OS users to cause a denial of service (unexpectedly high interrupt number, array overrun, and hypervisor crash) or possibly gain hypervisor privileges by setting up an HPET timer to deliver interrupts in IO-APIC mode, aka vHPET interrupt injection. | ||||
| CVE-2018-10981 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing x86 HVM guest OS users to cause a denial of service (host OS infinite loop) in situations where a QEMU device model attempts to make invalid transitions between states of a request. | ||||
| CVE-2018-10472 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing x86 HVM guest OS users (in certain configurations) to read arbitrary dom0 files via QMP live insertion of a CDROM, in conjunction with specifying the target file as the backing file of a snapshot. | ||||
| CVE-2018-10471 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing x86 PV guest OS users to cause a denial of service (out-of-bounds zero write and hypervisor crash) via unexpected INT 80 processing, because of an incorrect fix for CVE-2017-5754. | ||||
| CVE-2018-8897 | 8 Apple, Canonical, Citrix and 5 more | 19 Mac Os X, Ubuntu Linux, Xenserver and 16 more | 2024-08-05 | N/A |
| A statement in the System Programming Guide of the Intel 64 and IA-32 Architectures Software Developer's Manual (SDM) was mishandled in the development of some or all operating-system kernels, resulting in unexpected behavior for #DB exceptions that are deferred by MOV SS or POP SS, as demonstrated by (for example) privilege escalation in Windows, macOS, some Xen configurations, or FreeBSD, or a Linux kernel crash. The MOV to SS and POP SS instructions inhibit interrupts (including NMIs), data breakpoints, and single step trap exceptions until the instruction boundary following the next instruction (SDM Vol. 3A; section 6.8.3). (The inhibited data breakpoints are those on memory accessed by the MOV to SS or POP to SS instruction itself.) Note that debug exceptions are not inhibited by the interrupt enable (EFLAGS.IF) system flag (SDM Vol. 3A; section 2.3). If the instruction following the MOV to SS or POP to SS instruction is an instruction like SYSCALL, SYSENTER, INT 3, etc. that transfers control to the operating system at CPL < 3, the debug exception is delivered after the transfer to CPL < 3 is complete. OS kernels may not expect this order of events and may therefore experience unexpected behavior when it occurs. | ||||
| CVE-2018-7542 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen 4.8.x through 4.10.x allowing x86 PVH guest OS users to cause a denial of service (NULL pointer dereference and hypervisor crash) by leveraging the mishandling of configurations that lack a Local APIC. | ||||
| CVE-2018-7541 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing guest OS users to cause a denial of service (hypervisor crash) or gain privileges by triggering a grant-table transition from v2 to v1. | ||||
| CVE-2018-7540 | 2 Debian, Xen | 2 Debian Linux, Xen | 2024-08-05 | N/A |
| An issue was discovered in Xen through 4.10.x allowing x86 PV guest OS users to cause a denial of service (host OS CPU hang) via non-preemptable L3/L4 pagetable freeing. | ||||
| CVE-2018-5244 | 1 Xen | 1 Xen | 2024-08-05 | N/A |
| In Xen 4.10, new infrastructure was introduced as part of an overhaul to how MSR emulation happens for guests. Unfortunately, one tracking structure isn't freed when a vcpu is destroyed. This allows guest OS administrators to cause a denial of service (host OS memory consumption) by rebooting many times. | ||||
| CVE-2019-19581 | 2 Fedoraproject, Xen | 2 Fedora, Xen | 2024-08-05 | 6.5 Medium |
| An issue was discovered in Xen through 4.12.x allowing 32-bit Arm guest OS users to cause a denial of service (out-of-bounds access) because certain bit iteration is mishandled. In a number of places bitmaps are being used by the hypervisor to track certain state. Iteration over all bits involves functions which may misbehave in certain corner cases: On 32-bit Arm accesses to bitmaps with bit a count which is a multiple of 32, an out of bounds access may occur. A malicious guest may cause a hypervisor crash or hang, resulting in a Denial of Service (DoS). All versions of Xen are vulnerable. 32-bit Arm systems are vulnerable. 64-bit Arm systems are not vulnerable. | ||||
| CVE-2019-19582 | 2 Fedoraproject, Xen | 2 Fedora, Xen | 2024-08-05 | 6.5 Medium |
| An issue was discovered in Xen through 4.12.x allowing x86 guest OS users to cause a denial of service (infinite loop) because certain bit iteration is mishandled. In a number of places bitmaps are being used by the hypervisor to track certain state. Iteration over all bits involves functions which may misbehave in certain corner cases: On x86 accesses to bitmaps with a compile time known size of 64 may incur undefined behavior, which may in particular result in infinite loops. A malicious guest may cause a hypervisor crash or hang, resulting in a Denial of Service (DoS). All versions of Xen are vulnerable. x86 systems with 64 or more nodes are vulnerable (there might not be any such systems that Xen would run on). x86 systems with less than 64 nodes are not vulnerable. | ||||
| CVE-2019-19579 | 2 Fedoraproject, Xen | 2 Fedora, Xen | 2024-08-05 | 6.8 Medium |
| An issue was discovered in Xen through 4.12.x allowing attackers to gain host OS privileges via DMA in a situation where an untrusted domain has access to a physical device (and assignable-add is not used), because of an incomplete fix for CVE-2019-18424. XSA-302 relies on the use of libxl's "assignable-add" feature to prepare devices to be assigned to untrusted guests. Unfortunately, this is not considered a strictly required step for device assignment. The PCI passthrough documentation on the wiki describes alternate ways of preparing devices for assignment, and libvirt uses its own ways as well. Hosts where these "alternate" methods are used will still leave the system in a vulnerable state after the device comes back from a guest. An untrusted domain with access to a physical device can DMA into host memory, leading to privilege escalation. Only systems where guests are given direct access to physical devices capable of DMA (PCI pass-through) are vulnerable. Systems which do not use PCI pass-through are not vulnerable. | ||||
| CVE-2019-19577 | 2 Fedoraproject, Xen | 2 Fedora, Xen | 2024-08-05 | 7.2 High |
| An issue was discovered in Xen through 4.12.x allowing x86 AMD HVM guest OS users to cause a denial of service or possibly gain privileges by triggering data-structure access during pagetable-height updates. When running on AMD systems with an IOMMU, Xen attempted to dynamically adapt the number of levels of pagetables (the pagetable height) in the IOMMU according to the guest's address space size. The code to select and update the height had several bugs. Notably, the update was done without taking a lock which is necessary for safe operation. A malicious guest administrator can cause Xen to access data structures while they are being modified, causing Xen to crash. Privilege escalation is thought to be very difficult but cannot be ruled out. Additionally, there is a potential memory leak of 4kb per guest boot, under memory pressure. Only Xen on AMD CPUs is vulnerable. Xen running on Intel CPUs is not vulnerable. ARM systems are not vulnerable. Only systems where guests are given direct access to physical devices are vulnerable. Systems which do not use PCI pass-through are not vulnerable. Only HVM guests can exploit the vulnerability. PV and PVH guests cannot. All versions of Xen with IOMMU support are vulnerable. | ||||
| CVE-2019-19578 | 2 Fedoraproject, Xen | 2 Fedora, Xen | 2024-08-05 | 8.8 High |
| An issue was discovered in Xen through 4.12.x allowing x86 PV guest OS users to cause a denial of service via degenerate chains of linear pagetables, because of an incorrect fix for CVE-2017-15595. "Linear pagetables" is a technique which involves either pointing a pagetable at itself, or to another pagetable of the same or higher level. Xen has limited support for linear pagetables: A page may either point to itself, or point to another pagetable of the same level (i.e., L2 to L2, L3 to L3, and so on). XSA-240 introduced an additional restriction that limited the "depth" of such chains by allowing pages to either *point to* other pages of the same level, or *be pointed to* by other pages of the same level, but not both. To implement this, we keep track of the number of outstanding times a page points to or is pointed to another page table, to prevent both from happening at the same time. Unfortunately, the original commit introducing this reset this count when resuming validation of a partially-validated pagetable, incorrectly dropping some "linear_pt_entry" counts. If an attacker could engineer such a situation to occur, they might be able to make loops or other arbitrary chains of linear pagetables, as described in XSA-240. A malicious or buggy PV guest may cause the hypervisor to crash, resulting in Denial of Service (DoS) affecting the entire host. Privilege escalation and information leaks cannot be excluded. All versions of Xen are vulnerable. Only x86 systems are affected. Arm systems are not affected. Only x86 PV guests can leverage the vulnerability. x86 HVM and PVH guests cannot leverage the vulnerability. Only systems which have enabled linear pagetables are vulnerable. Systems which have disabled linear pagetables, either by selecting CONFIG_PV_LINEAR_PT=n when building the hypervisor, or adding pv-linear-pt=false on the command-line, are not vulnerable. | ||||