| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An LDAP Injection vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to retrieve sensitive information from a connected LDAP authentication server through an exposed authentication or management web interface. This vulnerability may also allow a remote attacker to authenticate as an LDAP user with a partial identifier if they additionally have that user's valid passphrase. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Use sender devcom for MPV master-up
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet: pep: fix use-after-free in pep_get_sb()
pep_get_sb() doesn't consider that pskb_may_pull() might have relocated
the skb data, and continue to access the older pointer, causing UAF.
Reproduced under KASAN:
BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0
Read of size 1 at addr ff11000105510f50 by task repro/157
pep_get_sb+0x234/0x3b0
pipe_handler_do_rcv+0x5f7/0xa10
pep_do_rcv+0x203/0x410
__sk_receive_skb+0x471/0x4a0
phonet_rcv+0x5b3/0x6c0
__netif_receive_skb+0xcc/0x1d0
Refetch the header with skb_header_pointer() after pskb_may_pull(), so
the possibly stale pointer is no longer dereferenced. There are better
ways to solve this, but, this is the less instrusive one. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Reject monmaps advertising zero monitors
A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a
monitor to the client. This monmap contains information about the
existing monitors in the cluster. Currently, a monmap indicating that
there are zero monitors in the cluster is treated as valid. However, it
is impossible to have zero monitors in the cluster and still receive a
valid monmap from a monitor. Therefore, such a monmap must be corrupted
and should be treated as invalid. Furthermore, a monmap with a monitor
count of zero can subsequently crash the client when attempting to open
a session with a monitor in __open_session(). This happens because the
"BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is
triggered.
This patch extends a check in ceph_monmap_decode() to also reject
arriving mon_maps with num_mon == 0 rather than only with
num_mon > CEPH_MAX_MON.
[ idryomov: drop "log output for unusual values of num_mon" part ] |
| A flaw was found in multicluster-global-hub. During a ManagedClusterMigration, the system incorrectly grants all managed hubs read access to a shared communication topic. This allows a compromised managed hub to intercept and collect sensitive bootstrap kubeconfigs, which contain API server tokens intended for other hubs. These tokens have an extended validity of approximately 9.86 years, significantly increasing the risk of unauthorized access and information disclosure to other managed clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: don't re-enter an instance callback that is still running
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Hold a dma-buf reference for imported BOs
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
(cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) |
| The Admin Safety Guard — Login Security, Limit Logins, 2FA & Brute Force Protection WordPress plugin before 1.4.0 does not perform any capability check on one of its REST API endpoints, allowing unauthenticated attackers to retrieve the full list of registered users including their usernames, email addresses, roles, and two-factor authentication enrollment status. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to retrieve stored contact messages and associated user data belonging to other users. |
| The WPC Order Tip for WooCommerce WordPress plugin before 3.3.1 does not perform authorisation or nonce checks in one of its reporting features, allowing unauthenticated attackers to retrieve sensitive order data belonging to any customer of the store, such as billing names, order IDs and statuses, fee amounts and order dates. |
| The InfiniteWP Client WordPress plugin before 1.13.6 does not properly verify the site-connection state and the authenticity of requests to its remote-management endpoint on WordPress Multisite installations, allowing unauthenticated attackers to bind their own key, hijack an administrator session, and take over the entire network, leading to remote code execution. |
| The PiWeb Cancel order / Refund request for WooCommerce WordPress plugin before 1.3.4.34 does not have authorization or ownership checks when adding the contents of a previous order to the cart, allowing unauthenticated users to disclose the contents of other customers' orders, as well as to clear and repopulate a logged in user's cart via a crafted link. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix division by zero with invalid uvd dimensions
When width or height is less than 16, width_in_mb or height_in_mb
becomes 0, leading to fs_in_mb being 0. This causes a division by
zero when calculating num_dpb_buffer in H264 and H264 Perf decode
paths.
Add validation to reject frames with width < 16 or height < 16
before performing any calculations that depend on these values.
V2: Format change - move up all vaiable definitions.
V3: Use warn_once to avoid spam.
(cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix source list corruption on a failed replace
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: challenge ACK for non-exact RST in SYN-RECEIVED
The SYN-RECEIVED request-socket path in tcp_check_req() accepts an
in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A
non-exact RST therefore removes the request instead of eliciting a
challenge ACK.
RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in
SYN-RECEIVED: an exact RST resets the connection, while a non-exact
in-window RST must trigger a challenge ACK and be dropped.
Apply that check before the ACK-field validation, following the RFC
sequence-number, RST, then ACK processing order. Factor the per-netns
challenge ACK quota out of tcp_send_challenge_ack() so request sockets
can share it. Use the request socket's send_ack() callback and its own
out-of-window ACK timestamp to send and rate-limit the response. |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: Workaround for TX hang caused by hardware packet parsing
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission. |
