| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stalwart Mail Server does not compare an OAuth redirect target against any registered destination in its default configuration. The validation routine in crates/http/src/auth/oauth/registration.rs returns success immediately when the client-authentication requirement is disabled, and that requirement is false in the shipped settings, so the supplied redirect value is neither matched against a registered client nor otherwise constrained. The value is stored with the authorization code, and the login page reads it back and sends the browser to it with the code attached. A request naming a destination the attacker controls therefore delivers a valid authorization code there once the account holder authenticates, and because the token endpoint checks only that the redirect presented at exchange matches the one recorded with the code, the same party can exchange it for access and refresh tokens and read the account's mail. |
| Midday allows any member of a team to delete it. The delete procedure in apps/api/src/trpc/routers/team.ts authorises the caller with the team-access helper, which returns true for every row in the team-membership table irrespective of the role it records, and the data-layer function it calls re-checks the same helper and nothing else. The neighbouring procedures that remove or update a member in the same router each resolve the caller's role and refuse the request unless it is owner, so the check exists in the file and is not applied to deletion. Member is the role an invited user receives, so any invitee can remove the team and every record scoped to it, and the deletion enqueues the cleanup job with the stored bank-connection tokens, which the job then uses against the connected providers. The update procedure in the same router carries no role check either. |
| Netmaker disables certificate verification on the connection to the configured mail server. The sender in pro/email/smtp.go assigns a TLS configuration whose skip-verify field is set to true unconditionally, directly beneath a comment stating that the setting should be false in production. No configuration value governs it and no code path restores verification, so the client accepts any certificate the mail server presents, including one an interposing party supplies. Mail that Netmaker sends over that connection includes password-reset messages carrying single-use tokens and user invitations carrying enrolment links, so a party positioned on the path between the server and its mail relay can read those messages in transit and use a captured reset token before the intended recipient does. The setting is absent from the development branch but present in the latest release. |
| Automatisch reveals whether an address is registered through the response to its forgot-password request. The controller at packages/backend/src/controllers/internal/api/v1/users/forgot-password.js looks the address up and chains a not-found throw onto the query, so an address with no account raises an error that the global handler renders as a not-found status, while a registered address proceeds to send the reset message and returns no-content. The route is mounted without authentication. Submitting candidate addresses and comparing the two status codes therefore establishes which addresses hold accounts, with no credential and no rate limiting in the path. |
| NebulaGraph exposes its runtime configuration over an unauthenticated HTTP service. Each daemon starts the web service defined in src/webservice/WebService.cpp, whose bind address defaults to all interfaces, and registers routes for reading and writing gflags alongside status and statistics. Neither the service nor its router carries any authentication, token check or address restriction. The read route returns the daemon's full set of runtime flag values, which includes the configured certificate, key and certificate-authority paths, the password file path, data directories and the transport-security enable flags. The write route parses a supplied map and applies each entry through the gflags runtime setter, so a caller able to reach the port can change the daemon's behaviour without restarting it, including disabling the transport-security flags, redirecting log files and altering flags such as failed_login_attempts and password_lock_time_in_secs. Public reports of this endpoint describe a single name, enable_authorize, being refused by the handler; at release 3.8.0 that refusal is not present and the handler applies every name it is given. |
| IDURAR ERP CRM changes the password of whichever account a request names rather than the account making the request. The update handler in backend/src/controllers/middlewaresControllers/createUserController/updatePassword.js resolves the authenticated user from the request that the token middleware populated, then issues its update against a filter built from the identifier in the URL path, and never compares the two. The route is mounted behind the administrator token check only, so any valid administrator session is sufficient, and the sole ownership-like guard in the handler rejects a single hardcoded demo address. A caller can therefore set an arbitrary password on any other administrator account and sign in as it. The read handler in the same controller directory accepts an identifier the same way, which supplies the identifiers needed to pick a target. |
| Mage AI does not confine the paths accepted by its browser-items API to the project directory. BrowserItemResource in mage_ai/api/resources/BrowserItemResource.py passes a caller-supplied path to the filesystem read and write helpers without calling the containment helper that the sibling FileContentResource and FileResource classes both use, so the resource contains no such call while those two contain several. A user holding the Viewer role, which grants read access within the project and nothing outside it, can therefore read any file the server process can read by supplying an absolute path. The permission model that would otherwise separate roles is not consulted for this route in the default configuration, because the setting that enables it defaults to false. Callers holding the Editor role additionally write through the same unconfined path, though that role is already able to execute code by design, so the boundary crossed by this flaw is the read available to the Viewer role. |
| OpenMetadata accepts a caller-supplied post-authentication redirect target and appends the issued token to it. SamlLoginServlet reads the callback request parameter and stores it in the HTTP session without comparing it against any configured or registered destination, and the assertion consumer servlet later formats that stored value into a URL carrying the freshly issued JWT together with the account's email and name before sending the redirect. The OIDC and OAuth2 handler follows the same pattern with its own redirect parameter and the issued identity token. A request naming a destination the attacker controls therefore causes the server to deliver a valid token for whoever completes the login to that destination. Because the token authenticates API calls as that account, a user who follows such a link and authenticates hands over control of their account. Version 2.0.0 removes the caller-supplied callback parameter; no 1.x release validates it. |
| ZLMediaKit confines the downloadFile API to a configured set of root directories with a prefix comparison that does not account for directory boundaries. The configuration loader in server/WebApi.cpp builds each root with File::absolutePath("", item, true); because the relative-path argument is empty that helper returns the value without a trailing separator. The handler then accepts a requested path when start_with(file_path, root) holds, so a sibling directory whose name merely begins with the configured root string satisfies the test and is served. The only other guard rejects a path containing two dots, which this requires none of. The equivalent confinement check for the ordinary static file server in src/Http/HttpFileManager.cpp computes its root with a non-empty second argument, which appends the separator before comparing, and so is not affected. The endpoint requires the configured API secret, so this grants no privilege beyond what that secret already implies, but it reads files outside the directory the operator confined it to, and the reference container runs the server as root. |
| one-api gates one of its two channel-pinning paths and not the other. middleware/auth.go permits a request to name a specific channel either through a suffix on the API key or through a URL path parameter. The suffix path is reached only after model.IsAdmin succeeds and otherwise rejects the caller, while the path-parameter branch sets the selected-channel value from c.Param("channelid") with no role check at all. The route carrying that parameter sits behind token authentication only, so any account holding a valid API token reaches it. The value flows to the distributor, which loads the channel by integer identifier with no scoping to the caller's user or group, and then sets the outbound Authorization header to that channel's stored key and directs the request at the channel's base URL. A low-privilege account can therefore pin any channel by incrementing an identifier, causing the server to make upstream requests bearing an operator-configured provider key the account was never granted, and bypassing both the per-group restriction and the channel's model allowlist. |
| ILIAS deserialises stored session data for an unauthenticated caller. The Shibboleth back-channel endpoint at components/ILIAS/AuthShibboleth/resources/shib_logout.php runs in a context that ilInitialisation exempts from authentication, and its logout-notification handler locates the session to terminate by reading every live row of the session table and passing each row's stored data to a hand-written parser that calls unserialize without restricting which classes may be constructed. Any serialised object present in any session row is therefore instantiated on behalf of an anonymous request, and object destructors run when those objects are discarded. A serialised object can be placed into a session row without logging in, because the LTI authentication entry point stores request parameters into the session and is reachable on a path the same initialisation code exempts from authentication. A class bundled with the application writes a JSON-encoded structure to a file named by one of its own properties when it is destroyed, which places attacker-controlled content at an attacker-chosen path below the web root and results in code execution as the web server user. Versions 9.22, 10.10 and 11.3 remove the endpoint's logout-notification implementation. |
| bestzip builds the argument list for the system zip utility without separating options from operands. The destination archive path and the caller-supplied source paths are passed to the child process with no -- delimiter between them, so any source entry beginning with a hyphen is interpreted by zip as an option rather than a file name. zip accepts -T to test the finished archive and -TT to name the command used to perform that test, so a source list containing those two entries and a command string causes zip to run that command through a shell once the archive has been written. An application that passes a file name or path it received from an untrusted source into the bestzip API therefore executes a command of the supplier's choosing. Versions 2.2.6 and 3.0.2 add the delimiter. |
| FiftyOne renders a dataset field's description as markup. The sidebar field-information component at app/packages/core/src/components/FieldLabelAndInfo/index.tsx passes the description string to React's dangerouslySetInnerHTML, and no layer between storage and render escapes or sanitises it; the neighbouring info values in the same component are rendered as React children and are escaped, so the description is the only raw path. A description is free-form text held in the dataset schema, so it persists in the database and travels with an exported or published dataset. Opening a dataset obtained from another party and hovering the field runs the stored markup in the application's origin. That origin is shared with the FiftyOne server, whose media route returns the contents of a caller-named absolute path and which is unauthenticated in the open-source server, so the injected script can read local files and reach the dataset and operator endpoints as the viewing user. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow an attacker to gain access the the BIOS menu because is has no password. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a Physically Proximate Attacker to access the internal components of the appliance, without leaving tamper evidence. To exploit this, the attacker needs to remove the tamper label and all fixing screws from the device without damaging it. This is called an F14 attack. |
| Nagios Core before 4.5.13 and Nagios XI before 2026R1.5 contains a CSRF vulnerability in cmd.cgi. When no Cookie header is present, the double-submit cookie protection can be bypassed by supplying matching NagFormId and nagFormId values in the POST body, allowing a cross-site request to execute Nagios commands as a currently authenticated user. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker with elevated privileges to falsify tamper events by accessing internal components. |
| Nagios Core before 4.5.12 contains a cross-site request forgery vulnerability in cmd.cgi where the CSRF protection mechanism passes validation when the NagFormId cookie is absent. Attackers can craft a malicious cross-site POST request to execute arbitrary Nagios commands as a currently authenticated user without their knowledge or consent. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker (with elevated privileges) to read and modify the Appliance SSD contents (because they are unencrypted). |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker with root access to modify the Recovery Partition (because of a lack of integrity protection). |
