| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Anti-Virus for ownCloud is an anti-virus application for file storage, synchronization, and sharing application ownCloud. Versions of Anti-Virus for ownCloud before 1.2.3 are vulnerable to Server-Side Request Forgery (SSRF). This corresponds to versions of ownCloud 10 prior to 10.15.3. Upgrade ownCloud 10 to version 10.15.3 or later or upgrade Anti-Virus for ownCloud 10 to version 1.2.3 or later to receive a fix. |
| An authentication bypass vulnerability exists in
the default SFTP server component utilized across the Ciena products listed. This vulnerability allows a remote, unauthenticated attacker to bypass
security controls and gain unauthorized access to the underlying filesystem.
Successful exploitation could allow an attacker to read or modify system files. |
| When reusing a libcurl handle for sequential transfers driven by
environment-variable proxy configuration, libcurl fails to clear the proxy
authentication state between requests. Specifically, if the initial transfer
authenticates against `proxyA` using Digest auth, a subsequent transfer routed
through `proxyB` erroneously leaks the `Proxy-Authorization:` header intended
solely for `proxyA`. |
| Improper certificate validation vulnerability in B&R Industrial Automation GmbH APROL.
This issue affects APROL: before R 4.4-01P5. |
| Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy. |
| Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write. |
| Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route. |
| When asking curl to use a `.netrc` file to find credentials and at the same
time specifying a URL with a username(without a password), like
`https://user@example.com/`, curl could wrongly get and use the password for
*another* user set in the `.netrc` file for that host if such a one exists and
there is no match for the specified user. |
| Authentication Bypass by Spoofing vulnerability in Apache IoTDB.
Certain Thrift RPC query handlers lack strict validation of the sessionId
parameter. An attacker can construct requests with a forged sessionId and,
without performing openSession authentication, receive valid query results.
This allows authentication bypass and unauthorized reading of time-series
data.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer. |
| A high-severity vulnerability exists in a web application component of BeyondTrust Remote Support and Privileged Remote Access related to the processing of certain input parameters. Insufficient validation of user-supplied input may allow an authenticated attacker with limited privileges to access unintended resources or data beyond their authorization scope. Exploitation is restricted to accounts with specific permissions. |
| A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support. Improper processing of authentication requests may allow an unauthenticated remote attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled. |
| A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support and Privileged Remote Access. Improper validation of authentication data may allow a network-positioned attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled |
| Prog
Management System developed by PROG MIS has a Exposure of Sensitive
Information vulnerability, allowing unauthenticated remote attackers to view
a specific page and obtain the database account and password. |
| Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish. |
| libcurl had a flaw that when instructed to clear proxy authentication
credentials which made it not do so, leaving the old credentials around to get
used for subsequent transfers that should not know nor use them. |
| AutoBangumi before 3.2.8 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to authenticate as the administrator by using the publicly known default credentials seeded at startup via add_default_user() in the database user module when the users table is empty. Attackers can submit the default credentials to the authentication login endpoint to gain full control of the application, including RSS feed configuration, downloader configuration, and all authenticated API endpoints. |
| Apereo CAS 7.3.0 before 8.0.0-RC6 contains a cryptographic vulnerability that allows remote unauthenticated attackers to recover plaintext conversation state by exploiting AES-GCM initialization vector reuse across the server lifetime. Attackers can collect multiple client-side webflow execution tokens from the unauthenticated login page and perform known-plaintext analysis to decrypt the webflow conversation state due to keystream reuse caused by a fixed all-zero IV paired with the same encryption key. |
| Url redirection to untrusted site ('open redirect') in M365 Copilot allows an unauthorized attacker to elevate privileges over a network. |
