| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Directory traversal vulnerability in Kerlink Kerlink Wirnet iStation 868 KerOS v.4.3.3_20200803132042 allows a remote attacker to obtain sensitive information via the SNMP update mechanism. |
| An issue in Kerlink Kerlink Wirnet iStation 868 KerOS v.4.3.3_20200803132042 allows a remote attacker to obtain sensitive information via the community string component. |
| EQ-3 Eqiva CC-RT-BLE Bluetooth Smart Radiator Thermostat Firmware up to the latest version 1.46 was discovered to allow unsecured bluetooth connections. This vulnerability allows attackers to gain full access to the device without authentication. |
| An issue in OPSWAT AppRemover Driver (ardrv.sys) v2017.10.02.1551 and earlier in IOCTL handler 0x2420031. Any local user can open the device and send process termination requests without privilege validation. |
| Buffer Overflow vulnerability in Kerlink Kerlink Wirnet iStation 868 KerOS v.4.3.3_20200803132042 allows a remote attacker to obtain sensitive information via the update URLs component. |
| An issue was discovered in cyrus-imapd in Cyrus IMAP through 3.12.2. GENURLAUTH-issued tokens can bypass ACLs. Any authenticated user could mint a URLAUTH token (via the GENURLAUTH command) for any mailbox they could name, even without read access on it. This would allow reading mail from mailboxes despite having no granted permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| The Academy LMS WordPress plugin before 3.8.1 does not verify ownership of a user-supplied user identifier in several of its lesson AJAX handlers, allowing authenticated users with subscriber-level access to read and modify other users' lesson notes and mark other users' lesson content as completed. |
| Improper Privilege Management in Zoom Rooms for Windows before version 7.1.0 may allow an authenticated user to conduct an escalation of privilege via local access. |
| An issue was discovered in openRISC OR1200 commit 83ac6b. An output mismatch between the RTL and the netlist of the or1200 cpu output port can lead to unexpected behavior. |
| An issue in Generic OEM UZ801_v2.1 4G LTE Router V3.4.3 allows a remote attacker to execute arbitrary code via the sbin/adbd component |
| An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. |
| An unauthenticated arbitrary file upload vulnerability in ck_upload_handler.php in Feng Office 3.11.13.11 allows remote attackers to upload malicious files (such as .html) to the web-accessible /tmp/ directory. |
| A cross-site scripting (XSS) vulnerability in Proxmox Virtual Environment (PVE) 9.x 5.1.8 and Proxmox Virtual Environment (PVE) 8.x 4.3.16 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload. |
| A race condition between the vncproxy and vncwebsocket API calls in Proxmox Virtual Environment (PVE) 9.x pve-manager before 9.1.9 and 8.x before 8.4.19; qemu-server 9.x before 9.1.7 and 8.x before 8.4.7; and pve-container before 6.1.3 (PVE 9.x) and before 5.3.4 (PVE 8.x) allows an attacker with privileges to call "vncproxy" to hijack a VNC session that is established in parallel by a different user for a different VM. |
| Incorrect access control in Proxmox Virtual Environment (PVE) 9.x qemu-server before 9.1.8 and 8.x before 8.4.8 allows users within limited privileges to obtain hashed passwords via the cloudinit/dump API. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in rt6_fill_node()
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| **UNSUPPORTED WHEN ASSIGNED** Exposed IOCTL with Insufficient Access Control in the ASUS AURA SYNC driver allows a local user to bypass the driver's verification and invoke arbitrary IOCTLs, resulting in privilege escalation.
Refer to the 'End-of-Life Notice and Driver Update for Legacy ASUS Drivers ' section on the ASUS Security Advisory for more information. |
| The Altiris WMI provider exposes a class (AltirisAgent_Stream) that allows any local standard user to read the contents of any file accessible to the SYSTEM account, bypassing filesystem ACLs. No admin privileges required. The provider reverts to the LocalSystem context when servicing WMI queries without re-impersonating the caller. Any local standard user can therefore read SYSTEM-readable files — including configuration files, service logs, and secrets stored with SYSTEM/Administrator-only ACLs — by querying the provider directly. |
| A non-administrator interactive user can obtain full SYSTEM code execution through a DCOM/task scheduler logic chain — no network access, no memory corruption required (ITMS 8.7.3) |
