| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in LearnHouse up to 98dfad76aad70711a8113f6c1fdabfccf10509ca. The affected element is an unknown function of the file /dash/org/settings/previews of the component Account Setting Page. The manipulation results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: decrease cached dst counters in dst_release
Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:
Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
Call trace:
percpu_counter_add_batch+0x3c/0x160 (P)
dst_release+0xec/0x108
dst_cache_destroy+0x68/0xd8
dst_destroy+0x13c/0x168
dst_destroy_rcu+0x1c/0xb0
rcu_do_batch+0x18c/0x7d0
rcu_core+0x174/0x378
rcu_core_si+0x18/0x30
Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too. |
| A vulnerability was determined in LearnHouse up to 98dfad76aad70711a8113f6c1fdabfccf10509ca. The impacted element is an unknown function of the file /api/v1/assignments/{assignment_id}/tasks/{task_id}/sub_file of the component Student Assignment Submission Handler. This manipulation causes improper control of resource identifiers. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| Summer Pearl Group Vacation Rental Management Platform prior to v1.0.2 suffers from insufficient server-side authorization. Authenticated attackers can call several endpoints and perform create/update/delete actions on resources owned by arbitrary users by manipulating request parameters (e.g., owner or resource id). |
| Summer Pearl Group Vacation Rental Management Platform prior to 1.0.2 is susceptible to a Slowloris-style Denial-of-Service (DoS) condition in the HTTP connection handling layer, where an attacker that opens and maintains many slow or partially-completed HTTP connections can exhaust the server’s connection pool and worker capacity, preventing legitimate users and APIs from accessing the service. |
| Totolink LR350 v9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the ssid parameter in the sub_421BAC function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Totolink LR350 v9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the http_host parameter in the sub_426EF8 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Totolink LR350 v9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the ssid parameter in the sub_422880 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Totolink LR350 v9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the ssid parameter in the sub_42396C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Kitware VTK (Visualization Toolkit) through 9.5.0 contains a heap use-after-free vulnerability in vtkGLTFDocumentLoader. The vulnerability manifests during mesh object copy operations where vector members are accessed after the underlying memory has been freed, specifically when handling GLTF files with corrupted or invalid mesh reference structures. |
| Cross-site scripting (XSS) vulnerability in Zucchetti Ad Hoc Infinity 4.2 and earlier allows remote unauthenticated attackers to inject arbitrary JavaScript via the pHtmlSource parameter of the /ahi/jsp/gsfr_feditorHTML.jsp?pHtmlSource endpoint. |
| Incorrect access control in the realtime.cgi endpoint of Deep Sea Electronics devices DSE855 v1.1.0 to v1.1.26 allows attackers to gain access to the admin panel and complete control of the device. |
| When SmartStart Inclusion fails during the onboarding of a Z-Wave PIR sensor, the sensor will join the network as a non-secure device. This vulnerability exists in Silicon Labs' Z-Wave PIR Sensor Reference design delivered as part of SiSDK v2025.6.0 and v2025.6.1. |
| A vulnerability was found in ponaravindb Hospital Management System 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /func3.php. The manipulation of the argument username1 leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability classified as problematic was found in chatchat-space Langchain-Chatchat up to 0.3.1. This vulnerability affects unknown code of the file /v1/files?purpose=assistants. The manipulation leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix memory accounting leak.
Matt Dowling reported a weird UDP memory usage issue.
Under normal operation, the UDP memory usage reported in /proc/net/sockstat
remains close to zero. However, it occasionally spiked to 524,288 pages
and never dropped. Moreover, the value doubled when the application was
terminated. Finally, it caused intermittent packet drops.
We can reproduce the issue with the script below [0]:
1. /proc/net/sockstat reports 0 pages
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 0
2. Run the script till the report reaches 524,288
# python3 test.py & sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT
3. Kill the socket and confirm the number never drops
# pkill python3 && sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 524288
4. (necessary since v6.0) Trigger proto_memory_pcpu_drain()
# python3 test.py & sleep 1 && pkill python3
5. The number doubles
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 1048577
The application set INT_MAX to SO_RCVBUF, which triggered an integer
overflow in udp_rmem_release().
When a socket is close()d, udp_destruct_common() purges its receive
queue and sums up skb->truesize in the queue. This total is calculated
and stored in a local unsigned integer variable.
The total size is then passed to udp_rmem_release() to adjust memory
accounting. However, because the function takes a signed integer
argument, the total size can wrap around, causing an overflow.
Then, the released amount is calculated as follows:
1) Add size to sk->sk_forward_alloc.
2) Round down sk->sk_forward_alloc to the nearest lower multiple of
PAGE_SIZE and assign it to amount.
3) Subtract amount from sk->sk_forward_alloc.
4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated().
When the issue occurred, the total in udp_destruct_common() was 2147484480
(INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release().
At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and
2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't
see a warning in inet_sock_destruct(). However, udp_memory_allocated
ends up doubling at 4).
Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated"), memory usage no longer doubles immediately after
a socket is close()d because __sk_mem_reduce_allocated() caches the
amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP
socket receives a packet, the subtraction takes effect, causing UDP
memory usage to double.
This issue makes further memory allocation fail once the socket's
sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet
drops.
To prevent this issue, let's use unsigned int for the calculation and
call sk_forward_alloc_add() only once for the small delta.
Note that first_packet_length() also potentially has the same problem.
[0]:
from socket import *
SO_RCVBUFFORCE = 33
INT_MAX = (2 ** 31) - 1
s = socket(AF_INET, SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX)
c = socket(AF_INET, SOCK_DGRAM)
c.connect(s.getsockname())
data = b'a' * 100
while True:
c.send(data) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs
Patch series "mm: fixes for device-exclusive entries (hmm)", v2.
Discussing the PageTail() call in make_device_exclusive_range() with
Willy, I recently discovered [1] that device-exclusive handling does not
properly work with THP, making the hmm-tests selftests fail if THPs are
enabled on the system.
Looking into more details, I found that hugetlb is not properly fenced,
and I realized that something that was bugging me for longer -- how
device-exclusive entries interact with mapcounts -- completely breaks
migration/swapout/split/hwpoison handling of these folios while they have
device-exclusive PTEs.
The program below can be used to allocate 1 GiB worth of pages and making
them device-exclusive on a kernel with CONFIG_TEST_HMM.
Once they are device-exclusive, these folios cannot get swapped out
(proc$pid/smaps_rollup will always indicate 1 GiB RSS no matter how much
one forces memory reclaim), and when having a memory block onlined to
ZONE_MOVABLE, trying to offline it will loop forever and complain about
failed migration of a page that should be movable.
# echo offline > /sys/devices/system/memory/memory136/state
# echo online_movable > /sys/devices/system/memory/memory136/state
# ./hmm-swap &
... wait until everything is device-exclusive
# echo offline > /sys/devices/system/memory/memory136/state
[ 285.193431][T14882] page: refcount:2 mapcount:0 mapping:0000000000000000
index:0x7f20671f7 pfn:0x442b6a
[ 285.196618][T14882] memcg:ffff888179298000
[ 285.198085][T14882] anon flags: 0x5fff0000002091c(referenced|uptodate|
dirty|active|owner_2|swapbacked|node=1|zone=3|lastcpupid=0x7ff)
[ 285.201734][T14882] raw: ...
[ 285.204464][T14882] raw: ...
[ 285.207196][T14882] page dumped because: migration failure
[ 285.209072][T14882] page_owner tracks the page as allocated
[ 285.210915][T14882] page last allocated via order 0, migratetype
Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_COMP|__GFP_ZERO),
id 14926, tgid 14926 (hmm-swap), ts 254506295376, free_ts 227402023774
[ 285.216765][T14882] post_alloc_hook+0x197/0x1b0
[ 285.218874][T14882] get_page_from_freelist+0x76e/0x3280
[ 285.220864][T14882] __alloc_frozen_pages_noprof+0x38e/0x2740
[ 285.223302][T14882] alloc_pages_mpol+0x1fc/0x540
[ 285.225130][T14882] folio_alloc_mpol_noprof+0x36/0x340
[ 285.227222][T14882] vma_alloc_folio_noprof+0xee/0x1a0
[ 285.229074][T14882] __handle_mm_fault+0x2b38/0x56a0
[ 285.230822][T14882] handle_mm_fault+0x368/0x9f0
...
This series fixes all issues I found so far. There is no easy way to fix
without a bigger rework/cleanup. I have a bunch of cleanups on top (some
previous sent, some the result of the discussion in v1) that I will send
out separately once this landed and I get to it.
I wish we could just use some special present PROT_NONE PTEs instead of
these (non-present, non-none) fake-swap entries; but that just results in
the same problem we keep having (lack of spare PTE bits), and staring at
other similar fake-swap entries, that ship has sailed.
With this series, make_device_exclusive() doesn't actually belong into
mm/rmap.c anymore, but I'll leave moving that for another day.
I only tested this series with the hmm-tests selftests due to lack of HW,
so I'd appreciate some testing, especially if the interaction between two
GPUs wanting a device-exclusive entry works as expected.
<program>
#include <stdio.h>
#include <fcntl.h>
#include <stdint.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/ioctl.h>
#include <linux/types.h>
#include <linux/ioctl.h>
#define HMM_DMIRROR_EXCLUSIVE _IOWR('H', 0x05, struct hmm_dmirror_cmd)
struct hmm_dmirror_cmd {
__u64 addr;
__u64 ptr;
__u64 npages;
__u64 cpages;
__u64 faults;
};
const size_t size = 1 * 1024 * 1024 * 1024ul;
const size_t chunk_size = 2 * 1024 * 1024ul;
int m
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
[iweiny: update commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point). |
