| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Glances is an open-source system cross-platform monitoring tool. From 4.5.2 until 4.5.6, _sanitize_mustache_dict() in glances/actions.py skips nested list and dictionary strings such as process cmdline values, allowing pipe characters to survive chevron.render() and be executed by secure_popen() through administrator-configured action templates. This issue is fixed in 4.5.6. |
| Discourse is an open-source discussion platform. Prior to 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.1, on sites with category group moderation enabled, the review queue could include an excerpt (and permalink) of the private message attached to a flag, even when the reviewing category moderator was not a participant in that message. These notify_moderators flag messages are addressed only to moderators and, for core flags, to a category's moderation groups as they existed when the flag was raised, so a category group moderator could read flag-discussion content they were not authorized to see. This affects official plugins that create such messages and core flags raised before a moderator's group was granted moderation of the category. Only the confidentiality of a limited excerpt of these flag-related private messages is affected; no content can be modified or deleted. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.1. |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len.
When a %NOTIFYEV: line longer than 39 bytes contains no " within the linearized region, the loop indices p1/p2 walk past value[39] and read adjacent stack memory until a stray quote byte is found or the index reaches len. The over-read string is then passed to strncmp()/atoi()/LOG_*, and if a quote byte is found out of bounds the subsequent value[p2] = '\0' performs a single-NUL out-of-bounds stack write at an attacker-influenced offset.
The %NOTIFYEV: payload carries network-derived content (LTIME network time, SIB1 base-station system information, CSPS/RRCSTATE), so a rogue cellular base station, a malicious or compromised modem module, or RF manipulation that induces an over-long notify line reaches the defect without any application interaction; the handler runs automatically on the unsolicited event in the modem RX thread.
The impact is out-of-bounds stack disclosure (into logs and parsing) and stack corruption that can crash the modem RX thread (denial of service). The write offset is only weakly controlled, so memory-safe code execution is not demonstrated. The fix bounds both scanning loops by out_len, keeping all accesses within the linearized buffer. |
| The ShopSmart Loyalty for WooCommerce WordPress plugin through 1.0.0 does not perform any authorization or ownership check on a phone-number lookup exposed to unauthenticated users, allowing anyone who knows a customer's phone number to retrieve that customer's loyalty profile, including name, email, and account balance. |
| In JetBrains Ktor before 3.4.1 potential DoS attack via WebSocket decompression was possible |
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. |
| In JetBrains YouTrack before 2026.2.18112 an authenticated user could enumerate accounts via the users search endpoint |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, GlancesActions.run() in glances/actions.py ignores --disable-config-exec for on-alert action commands and invokes secure_popen() with shell operators enabled, allowing configured redirection, command chaining, or pipes to execute when an alert triggers. This issue is fixed in 4.5.6. |
| Joomla Extension - regularlabs.com - Unauthenticated RCE through unverified reflected user input in Sourcerer < 14.0.0 - Regular Labs Sourcerer before 14.0.0 processes {source} blocks found in Joomla’s final rendered HTML without reliably determining where that code originated. |
| OpenTofu versions before 1.11.4 contain a denial of service vulnerability in the tofu init command when processing maliciously-crafted .zip archives for provider or module packages. Attackers can cause excessive CPU usage by controlling .zip archive content served during dependency installation, degrading system performance and preventing timely completion of the init process. |
| Scriban before 7.0.0 fails to clear the CachedTemplates dictionary when TemplateContext.Reset() is called, allowing cached templates to persist across reused contexts. Attackers can exploit request-dependent ITemplateLoader implementations to access previously authorized template content from earlier renders without triggering TemplateLoader.Load() again. |
| Scriban before 7.0.0 (affected versions <= 6.6.0) contains a denial-of-service vulnerability in which the LimitToString safety limit (default 1MB) can be bypassed because ObjectToString resets the per-call length counter (_currentToStringLength) on every top-level call and StringBuilderOutput enforces no cumulative output-size limit. An attacker who can supply a template can render a near-limit string repeatedly in a loop, allocating approximately 1GB of memory and causing an out-of-memory condition that crashes the host application. |
| Scriban before 7.2.2 contains an access-modifier bypass vulnerability in TypedObjectAccessor that allows template code to write CLR object properties without setter-visibility checks. Attackers can modify properties with private, internal, or init-only setters, and perform mass assignment on public-setter properties, permanently altering live host objects after template rendering. |
| The Admin Custom Login plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 3.6.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The User Login History plugin for WordPress is vulnerable to SQL Injection via the 'blog_id' parameter in all versions up to, and including, 2.1.7. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is only exploitable on multisite installations. |
| A security flaw has been discovered in Dolibarr up to 23.0.3. Affected is an unknown function of the file htdocs/user/card.php of the component User Cloning. The manipulation of the argument ID results in ldap injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The patch is identified as 798e65356ede03c2812ab1a728f23fae34de5592. It is advisable to implement a patch to correct this issue. |
| A vulnerability was detected in SourceCodester Stock Management System 1.0. This issue affects some unknown processing of the file /classes/Master.php?f=delete_supplier. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit is now public and may be used. |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1064 via the Form Builder widget's 'webhook_url' setting. The widget's render() method persists the attacker-controlled URL into the wpr_webhook_url_{widget_id} option on every render (including a Contributor previewing their own draft), and the wpr_form_builder_webhook AJAX handler — registered for both authenticated and unauthenticated callers — reads that option and dispatches the outbound request via the non-safe wp_remote_post(), with no host allowlist, no scheme restriction, and no private/loopback IP filter (the plugin's existing wpr_is_blocked_remote_host / wpr_is_private_or_local_ip helpers are not called on this path). This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| The Quiz and Survey Master (QSM) – Easy Quiz and Survey Maker plugin for WordPress is vulnerable to generic SQL Injection via 'randon_category' Quiz Option in all versions up to, and including, 11.2.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
