| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()`
because the buffer is not marked uptodate, even though its in-memory
contents are valid and are about to be overwritten.
To prevent this spurious warning, unconditionally set the `BH_Uptodate`
flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and
`udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and
matches the workaround previously applied to `udf_close_lvid()` in commit
853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty").
Extending this workaround ensures consistent behavior across all LVID
updates.
Buffer I/O error on dev loop0, logical block 128, lost sync page write
------------[ cut here ]------------
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087
...
Call Trace:
<TASK>
udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078
udf_reconfigure+0x336/0x540 fs/udf/super.c:679
reconfigure_super+0x232/0x8f0 fs/super.c:1080
vfs_cmd_reconfigure fs/fsopen.c:268 [inline]
vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297
__do_sys_fsconfig fs/fsopen.c:463 [inline]
__se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC
The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries
uninitialized for multi-XCC GPUs. This causes null pointer dereferences
when accessing arrays indexed by XCC ID >= 2. Extend the loop to cover
all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC
arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures through a common unwind path that drops the DL
channel reference, the UL channel reference, and the initial reference
from device_initialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Fix possible console use-after-free
When emitting a record via legacy printing, it is possible that a handover
to another legacy printing context occurs. When a context has performed a
handover, the console SRCU read lock is released and the pointer to the
console struct might now be invalid. Therefore, after calling
nbcon_legacy_emit_next_record() or console_emit_next_record(), it is
necessary to check if a handover occurred _before_ further @con usage.
Sashiko pointed out that console_flush_one_record() was not doing this.
In console_flush_one_record(), after emitting a record, move the further
usage of @con after the handover check. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wireless: Fail probe when there is no ACPI match
Every platform driver can be forced to match a device that does not match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device ACPI companion
object need to verify its presence.
asus_wireless_probe() returns success when acpi_match_acpi_device()
finds no match, leaving behind an input device that never reports
anything because the notify handler is not installed. Worse, when the
driver is force-bound to a device without an ACPI companion, probe
still succeeds and stores a NULL companion pointer, which
asus_wireless_remove() later passes to acpi_dev_remove_notify_handler(),
leading to a NULL pointer dereference on unbind.
Return -ENODEV when the device does not match the ID table. This also
covers the missing-companion case, because acpi_match_acpi_device()
rejects a NULL device. Perform the check before allocating any driver
state, instead of after the input device has already been registered. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: check endpoint DMA allocation
ast_udc_probe() allocates a coherent DMA buffer used as the backing store
for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer
pointers from udc->ep0_buf, so a failed allocation is dereferenced during
probe.
Check the allocation before endpoint setup. The existing probe error path
called ast_udc_remove(), which unregisters the gadget unconditionally and
is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup
helper for probe failures so pre-registration failures only unwind the
resources that were actually initialized.
This was found by a local static analysis checker for unchecked allocator
returns while scanning Linux 6.16. The change was checked by applying it
to current mainline and by running checkpatch. I do not have access to
Aspeed UDC hardware, so no runtime testing was performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held,
as remove_id_store can free the node. Thus, make a copy in
usb_probe_interface. Clarify the documentation that the id parameter is
only valid during the probe.
USB serial has the same pattern, but it does not need fixing as the IDs
cannot be removed via sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: acpi-notify: Check ACPI companion before use
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
san_probe() dereferences the result of ACPI_COMPANION() when installing
the GSBUS address space handler, so force-binding the driver to a device
without an ACPI companion leads to a NULL pointer dereference. The
dereference was introduced when the probe function was switched from
ACPI_HANDLE() to ACPI_COMPANION().
Check the ACPI companion against NULL and return -ENODEV when it is
missing, like commit e4865a56d013 ("ACPI: driver: Check ACPI_COMPANION()
against NULL during probe") does for the core ACPI platform drivers. |
