| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.0 before 8.0(5.20), 8.1 before 8.1(2.48), 8.2 before 8.2(3), and 8.3 before 8.3(2.1), when the RIP protocol and the Cisco Phone Proxy functionality are configured, allow remote attackers to cause a denial of service (device reload) via a RIP update, aka Bug ID CSCtg66583. |
| The ISAKMP implementation on Cisco Adaptive Security Appliances (ASA) devices generates different responses for IKE aggressive-mode messages depending on whether invalid VPN groups are specified, which allows remote attackers to enumerate groups via a series of messages, aka Bug ID CSCue73708. |
| The time-based ACL implementation on Cisco Adaptive Security Appliances (ASA) devices, and in Cisco Firewall Services Module (FWSM), does not properly handle periodic statements for the time-range command, which allows remote attackers to bypass intended access restrictions by sending network traffic during denied time periods, aka Bug IDs CSCuf79091 and CSCug45850. |
| Race condition in the CIFS implementation in the rewriter module in the Clientless SSL VPN component on Cisco Adaptive Security Appliances (ASA) devices allows remote authenticated users to cause a denial of service (device reload) by accessing resources within multiple sessions, aka Bug ID CSCub58996. |
| The vpnclient program in the Easy VPN component on Cisco Adaptive Security Appliances (ASA) 5505 devices allows local users to gain privileges via unspecified vectors, aka Bug ID CSCuf85295. |
| Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCtq06065 and CSCtq09978. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.6), 8.3 before 8.3(2.23), 8.4 before 8.4(2.7), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via malformed ILS traffic, aka Bug IDs CSCtq57697 and CSCtq57802. |
| Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allows remote attackers to cause a denial of service (block exhaustion) via multicast traffic, aka Bug ID CSCtg63992. |
| The platform-sw component on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 before 8.2(5.3), 8.3 before 8.3(2.20), and 8.4 before 8.4(2.1) does not properly handle non-ASCII characters in an interface description, which allows local users to cause a denial of service (reload without configuration) via a crafted description, aka Bug ID CSCtq50523. |
| Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5), 8.5 before 8.5(1.17), 8.6 before 8.6(1.10), and 8.7 before 8.7(1.3) allow remote attackers to cause a denial of service (device reload) via a crafted certificate, aka Bug ID CSCuc72408. |
| The NAT process on Cisco Adaptive Security Appliances (ASA) devices allows remote attackers to cause a denial of service (connections-table memory consumption) via crafted packets, aka Bug ID CSCue46386. |
| The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815. |
| Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.28), 8.1 and 8.2 before 8.2(5.35), 8.3 before 8.3(2.34), 8.4 before 8.4(4.11), 8.6 before 8.6(1.10), and 8.7 before 8.7(1.3), and Cisco Firewall Services Module (FWSM) software 3.1 and 3.2 before 3.2(24.1) and 4.0 and 4.1 before 4.1(11.1), allow remote attackers to cause a denial of service (device reload) via a crafted IKEv1 message, aka Bug IDs CSCub85692 and CSCud20267. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier allow remote attackers to cause a denial of service (block exhaustion) via EIGRP traffic that triggers an EIGRP multicast storm, aka Bug ID CSCtf20269. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. |
| A vulnerability in the WebVPN web-based management interface of Cisco Adaptive Security Appliance could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvg33985. |
| A vulnerability in the Web Server Authentication Required screen of the Clientless Secure Sockets Layer (SSL) VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of that portal on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the portal or allow the attacker to access sensitive browser-based information. This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco ASA Software: 3000 Series Industrial Security Appliances, Adaptive Security Virtual Appliance (ASAv), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches, ASA Services Module for Cisco 7600 Series Routers. Cisco Bug IDs: CSCvh20742. |
| A vulnerability in the implementation of Traffic Flow Confidentiality (TFC) over IPsec functionality in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error that may occur if the affected software renegotiates the encryption key for an IPsec tunnel when certain TFC traffic is in flight. An attacker could exploit this vulnerability by sending a malicious stream of TFC traffic through an established IPsec tunnel on an affected device. A successful exploit could allow the attacker to cause a daemon process on the affected device to crash, which could cause the device to crash and result in a DoS condition. |
| A vulnerability in the authorization subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, but unprivileged (levels 0 and 1), remote attacker to perform privileged actions by using the web management interface. The vulnerability is due to improper validation of user privileges when using the web management interface. An attacker could exploit this vulnerability by sending specific HTTP requests via HTTPS to an affected device as an unprivileged user. An exploit could allow the attacker to retrieve files (including the running configuration) from the device or to upload and replace software images on the device. |
