| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hw64.sys in Marvin Test HW.exe before 5.0.5.0 allows unprivileged user-mode processes to arbitrarily map physical memory with read/write access via the MmMapIoSpace API (IOCTL 0x9c40a4f8, 0x9c40a4e8, 0x9c40a4c0, 0x9c40a4c4, 0x9c40a4ec, and seven others), leading to a denial of service (BSOD). |
| Incorrect Authorization vulnerability in OpenText™ Operations Bridge Manager.
The vulnerability could allow authenticated users to change their password without providing their old password.
This issue affects Operations Bridge Manager: 24.2, 24.4. |
| A security issue exists within the 5032 16pt Digital Configurable module’s web server. The web server’s session number increments at an interval that correlates to the last two consecutive sign in session interval, making it predictable. |
| Stalwart Mail Server is an open-source mail server. Prior to version 0.8.0, attackers who achieved Arbitrary Code Execution as the stalwart-mail user (including web interface admins) can gain complete root access to the system. Usually, system services are run as a separate user (not as root) to isolate an attacker with Arbitrary Code Execution to the current service. Therefore, other system services and the system itself remains protected in case of a successful attack. stalwart-mail runs as a separate user, but it can give itself full privileges again in a simple way, so this protection is practically ineffective. Server admins who handed out the admin credentials to the mail server, but didn't want to hand out complete root access to the system, as well as any attacked user when the attackers gained Arbitrary Code Execution using another vulnerability, may be vulnerable. Version 0.8.0 contains a patch for the issue. |
| In Search Guard FLX versions 3.1.2 and earlier, while Document-Level Security (DLS) is correctly enforced elsewhere, when the search is triggered from a Signals watch, the DLS rule is not enforced, allowing access to all documents in the queried indices. |
| ListCheck.exe developed by Acer has a Local Privilege Escalation vulnerability. Authenticated local attackers can replace ListCheck.exe with a malicious executable of the same name, which will be executed by the system and result in privilege escalation. |
| Incorrect Authorization vulnerability in The Wikimedia Foundation Mediawiki - OAuth Extension allows Authentication Bypass.This issue affects Mediawiki - OAuth Extension: from 1.39 through 1.43. |
| In Soffid Console 3.6.31 before 3.6.32, authorization to use the pam service is mishandled. |
| KEDA is a Kubernetes-based Event Driven Autoscaling component. Prior to versions 2.17.3 and 2.18.3, an Arbitrary File Read vulnerability has been identified in KEDA, potentially affecting any KEDA resource that uses TriggerAuthentication to configure HashiCorp Vault authentication. The vulnerability stems from an incorrect or insufficient path validation when loading the Service Account Token specified in spec.hashiCorpVault.credential.serviceAccount. An attacker with permissions to create or modify a TriggerAuthentication resource can exfiltrate the content of any file from the node's filesystem (where the KEDA pod resides) by directing the file's content to a server under their control, as part of the Vault authentication request. The potential impact includes the exfiltration of sensitive system information, such as secrets, keys, or the content of files like /etc/passwd. This issue has been patched in versions 2.17.3 and 2.18.3. |
| The agent in Quest KACE Systems Management Appliance (SMA) before 14.0.97 and 14.1.x before 14.1.19 potentially allows privilege escalation on managed systems. |
| A vulnerability exists in the NodeRestriction admission controller where nodes can bypass dynamic resource allocation authorization checks. When the DynamicResourceAllocation feature gate is enabled, the controller properly validates resource claim statuses during pod status updates but fails to perform equivalent validation during pod creation. This allows a compromised node to create mirror pods that access unauthorized dynamic resources, potentially leading to privilege escalation. |
| A vulnerability was identified in the XPC services of Fantastical. The services failed to implement proper client authorization checks in its listener:shouldAcceptNewConnection method, unconditionally accepting requests from any local process. As a result, any local, unprivileged process could connect to the XPC service and access its methods.
This issue has been resolved in version 4.0.16. |
| The YoSmart YoLink MQTT broker through 2025-10-02 does not enforce sufficient authorization controls to prevent cross-account attacks, allowing an attacker to remotely operate affected devices if the attacker obtains the associated device IDs. Because YoLink device IDs are predictable, an attacker can exploit this to gain full control over any other YoLink user's devices. |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| A vulnerability has been identified in RUGGEDCOM RST2428P (6GK6242-6PA00) (All versions < V3.2), SCALANCE XCH328 (6GK5328-4TS01-2EC2) (All versions < V3.2), SCALANCE XCM324 (6GK5324-8TS01-2AC2) (All versions < V3.2), SCALANCE XCM328 (6GK5328-4TS01-2AC2) (All versions < V3.2), SCALANCE XCM332 (6GK5332-0GA01-2AC2) (All versions < V3.2), SCALANCE XRH334 (24 V DC, 8xFO, CC) (6GK5334-2TS01-2ER3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 12xFO) (6GK5334-3TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230 V AC, 8xFO) (6GK5334-2TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-3AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 12xFO) (6GK5334-3TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24 V DC, 8xFO) (6GK5334-2TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (24V DC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-2AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 12xFO) (6GK5334-3TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230 V AC, 8xFO) (6GK5334-2TS01-4AR3) (All versions < V3.2), SCALANCE XRM334 (2x230V AC, 2x10G, 24xSFP, 8xSFP+) (6GK5334-5TS01-4AR3) (All versions < V3.2). An internal session termination functionality in the web interface of affected products contains an incorrect authorization check vulnerability. This could allow an authenticated remote attacker with "guest" role to terminate legitimate users' sessions. |
| opa-envoy-plugun is a plugin to enforce OPA policies with Envoy. Versions prior to 1.13.2-envoy-2 have a vulnerability in how the `input.parsed_path` field is constructed. HTTP request paths are treated as full URIs when parsed; interpreting leading path segments prefixed with double slashes (`//`) as authority components, and therefore dropping them from the parsed path. This creates a path interpretation mismatch between authorization policies and backend servers, enabling attackers to bypass access controls by crafting requests where the authorization filter evaluates a different path than the one ultimately served. Version 1.13.2-envoy-2 fixes the issue. |
| In Splunk MCP Server app versions below 0.2.4, a user with access to the "run_splunk_query" Model Context Protocol (MCP) tool could bypass the SPL command allowlist controls in MCP by embedding SPL commands as sub-searches, leading to unauthorized actions beyond the intended MCP restrictions. |
| Abnormal Security /v1.0/rbac/users_v2/{USER_ID}/ before 2025-02-19 allows downgrading the privileges of other user accounts. |
| An access control vulnerability was discovered in the Request Trace and Download Trace functionalities of CMC before 25.1.0 due to a specific access restriction not being properly enforced for users with limited privileges. An authenticated user with limited privileges can request and download trace files due to improper access restrictions, potentially exposing unauthorized network data. |
| An issue in Advanced Plugins reportsstatistics v1.3.20 and before allows a remote attacker to execute arbitrary code via the Sales Reports, Statistics, Custom Fields & Export module. |
